/* $NetBSD: adm5120_obio.c,v 1.4 2011/07/01 18:38:48 dyoung Exp $ */
/*-
* Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* Copyright 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Simon Burge for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: adm5120_obio.c,v 1.4 2011/07/01 18:38:48 dyoung Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/bus.h>
#include <mips/cache.h>
#include <mips/cpuregs.h>
#include <mips/adm5120/include/adm5120reg.h>
#include <mips/adm5120/include/adm5120var.h>
#include <mips/adm5120/include/adm5120_mainbusvar.h>
#include <mips/adm5120/include/adm5120_obiovar.h>
#include "locators.h"
#ifdef OBIO_DEBUG
int obio_debug = 1;
#define OBIO_DPRINTF(__fmt, ...) \
do { \
if (obio_debug) \
printf((__fmt), __VA_ARGS__); \
} while (/*CONSTCOND*/0)
#else /* !OBIO_DEBUG */
#define OBIO_DPRINTF(__fmt, ...) do { } while (/*CONSTCOND*/0)
#endif /* OBIO_DEBUG */
static int obio_match(device_t, cfdata_t, void *);
static void obio_attach(device_t, device_t, void *);
static int obio_submatch(device_t, cfdata_t, const int *, void *);
static int obio_print(void *, const char *);
CFATTACH_DECL_NEW(obio, 0, obio_match, obio_attach, NULL, NULL);
/* There can be only one. */
int obio_found;
struct obiodev {
const char *od_name;
bus_addr_t od_addr;
int od_irq;
uint32_t od_gpio_mask;
};
const struct obiodev obiodevs[] = {
{"uart", ADM5120_BASE_UART0, 1, 0x0},
{"uart", ADM5120_BASE_UART1, 2, 0x0},
{"admsw", ADM5120_BASE_SWITCH, 9, 0x0},
{"ahci", ADM5120_BASE_USB, 3, 0x0},
{"admflash", ADM5120_BASE_SRAM0, 0, 0x0},
{NULL, 0, 0, 0x0},
};
static int
obio_match(device_t parent, cfdata_t match, void *aux)
{
return !obio_found;
}
static void
obio_attach_args_create(struct obio_attach_args *oa, const struct obiodev *od,
void *gpio, bus_dma_tag_t dmat, bus_space_tag_t st)
{
oa->oba_name = od->od_name;
oa->oba_addr = od->od_addr;
oa->oba_irq = od->od_irq;
oa->oba_dt = dmat;
oa->oba_st = st;
oa->oba_gpio = gpio;
oa->oba_gpio_mask = od->od_gpio_mask;
}
static void
obio_attach(device_t parent, device_t self, void *aux)
{
struct mainbus_attach_args *ma = (struct mainbus_attach_args *)aux;
struct obio_attach_args oa;
const struct obiodev *od;
obio_found = 1;
printf("\n");
OBIO_DPRINTF("%s: %d\n", __func__, __LINE__);
OBIO_DPRINTF("%s: %d\n", __func__, __LINE__);
for (od = obiodevs; od->od_name != NULL; od++) {
OBIO_DPRINTF("%s: %d\n", __func__, __LINE__);
obio_attach_args_create(&oa, od, ma->ma_gpio, ma->ma_dmat,
ma->ma_obiot);
OBIO_DPRINTF("%s: %d\n", __func__, __LINE__);
(void)config_found_sm_loc(self, "obio", NULL, &oa, obio_print,
obio_submatch);
}
OBIO_DPRINTF("%s: %d\n", __func__, __LINE__);
}
static int
obio_submatch(device_t parent, cfdata_t cf, const int *ldesc, void *aux)
{
struct obio_attach_args *oa = aux;
if (cf->cf_loc[OBIOCF_ADDR] != OBIOCF_ADDR_DEFAULT &&
cf->cf_loc[OBIOCF_ADDR] != oa->oba_addr)
return 0;
return config_match(parent, cf, aux);
}
static int
obio_print(void *aux, const char *pnp)
{
struct obio_attach_args *oa = aux;
if (pnp != NULL)
aprint_normal("%s at %s", oa->oba_name, pnp);
if (oa->oba_addr != OBIOCF_ADDR_DEFAULT)
aprint_normal(" addr 0x%"PRIxBUSADDR, oa->oba_addr);
if (oa->oba_gpio_mask != OBIOCF_GPIO_MASK_DEFAULT)
aprint_normal(" gpio_mask 0x%02x", oa->oba_gpio_mask);
return UNCONF;
}