/* *********************************************************************
* BCM1280/BCM1400 Board Support Package
*
* SCD Constants and Macros File: bcm1480_scd.h
*
* This module contains constants and macros useful for
* manipulating the System Control and Debug module.
*
* BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003,2004,2005
* Broadcom Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and
* conditions. Subject to these conditions, you may download,
* copy, install, use, modify and distribute modified or unmodified
* copies of this software in source and/or binary form. No title
* or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions
* as they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or
* logo of Broadcom Corporation. The "Broadcom Corporation"
* name may not be used to endorse or promote products derived
* from this software without the prior written permission of
* Broadcom Corporation.
*
* 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
* WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT
* SHALL BROADCOM BE LIABLE FOR ANY DAMAGES WHATSOEVER, AND IN
* PARTICULAR, BROADCOM SHALL NOT BE LIABLE FOR DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE), EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
********************************************************************* */
#ifndef _BCM1480_SCD_H
#define _BCM1480_SCD_H
#include "sb1250_defs.h"
/* *********************************************************************
* Pull in the BCM1250's SCD since lots of stuff is the same.
********************************************************************* */
#include "sb1250_scd.h"
/* *********************************************************************
* Some general notes:
*
* This file is basically a "what's new" header file. Since the
* BCM1250 and the new BCM1480 (and derivatives) share many common
* features, this file contains only what's new or changed from
* the 1250. (above, you can see that we include the 1250 symbols
* to get the base functionality).
*
* In software, be sure to use the correct symbols, particularly
* for blocks that are different between the two chip families.
* All BCM1480-specific symbols have _BCM1480_ in their names,
* and all BCM1250-specific and "base" functions that are common in
* both chips have no special names (this is for compatibility with
* older include files). Therefore, if you're working with the
* SCD, which is very different on each chip, A_SCD_xxx implies
* the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
* version.
********************************************************************* */
/* *********************************************************************
* System control/debug registers
********************************************************************* */
/*
* System Identification and Revision Register (Table 12)
* Register: SCD_SYSTEM_REVISION
* This register is field compatible with the 1250.
*/
/*
* New part definitions
*/
#define K_SYS_PART_BCM1480 0x1406
#define K_SYS_PART_BCM1280 0x1206
#define K_SYS_PART_BCM1455 0x1407
#define K_SYS_PART_BCM1255 0x1257
#define K_SYS_PART_BCM1158 0x1156
/*
* Manufacturing Information Register (Table 14)
* Register: SCD_SYSTEM_MANUF
*/
/*
* System Configuration Register (Table 15)
* Register: SCD_SYSTEM_CFG
* Entire register is different from 1250, all new constants below
*/
#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0)
#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1)
#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2)
#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3)
#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4)
#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5)
#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6)
#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)
#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11)
#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)
#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17)
#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18)
#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
#define K_BCM1480_SYS_BOOT_MODE_ROM32 0
#define K_BCM1480_SYS_BOOT_MODE_ROM8 1
#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3
#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19)
#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20)
#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21)
#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23)
#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24)
#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25)
#define S_BCM1480_SYS_CONFIG 26
#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)
#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32,15)
#define S_BCM1480_SYS_NODEID 47
#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)
#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51)
#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52)
#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53)
#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54)
#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55)
#define S_BCM1480_SYS_DISABLECPU0 56
#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
#define S_BCM1480_SYS_DISABLECPU1 57
#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
#define S_BCM1480_SYS_DISABLECPU2 58
#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
#define S_BCM1480_SYS_DISABLECPU3 59
#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60)
#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61)
#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62)
#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63)
/*
* Scratch Register (Table 16)
* Register: SCD_SYSTEM_SCRATCH
* Same as BCM1250
*/
/*
* Mailbox Registers (Table 17)
* Registers: SCD_MBOX_{0,1}_CPU_x
* Same as BCM1250
*/
/*
* See bcm1480_int.h for interrupt mapper registers.
*/
/*
* Watchdog Timer Initial Count Registers (Table 23)
* Registers: SCD_WDOG_INIT_CNT_x
*
* The watchdogs are almost the same as the 1250, except
* the configuration register has more bits to control the
* other CPUs.
*/
/*
* Watchdog Timer Configuration Registers (Table 25)
* Registers: SCD_WDOG_CFG_x
*/
#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0)
#define S_BCM1480_SCD_WDOG_RESET_TYPE 2
#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)
#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
#define K_BCM1480_SCD_WDOG_RESET_SOFT 1
#define K_BCM1480_SCD_WDOG_RESET_CPU0 3
#define K_BCM1480_SCD_WDOG_RESET_CPU1 5
#define K_BCM1480_SCD_WDOG_RESET_CPU2 9
#define K_BCM1480_SCD_WDOG_RESET_CPU3 17
#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31
#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8)
/*
* General Timer Initial Count Registers (Table 26)
* Registers: SCD_TIMER_INIT_x
*
* The timer registers are the same as the BCM1250
*/
/*
* ZBbus Count Register (Table 29)
* Register: ZBBUS_CYCLE_COUNT
*
* Same as BCM1250
*/
/*
* ZBbus Compare Registers (Table 30)
* Registers: ZBBUS_CYCLE_CPx
*
* Same as BCM1250
*/
/*
* System Performance Counter Configuration Register (Table 31)
* Register: PERF_CNT_CFG_0
*
* SPC_CFG_SRC[0-3] is the same as the 1250.
* SPC_CFG_SRC[4-7] only exist on the 1480
* The clear/enable bits are in different locations on the 1250 and 1480.
*/
#define S_SPC_CFG_SRC4 32
#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_SPC_CFG_SRC4)
#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC4)
#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4)
#define S_SPC_CFG_SRC5 40
#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_SPC_CFG_SRC5)
#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC5)
#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5)
#define S_SPC_CFG_SRC6 48
#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_SPC_CFG_SRC6)
#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC6)
#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6)
#define S_SPC_CFG_SRC7 56
#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_SPC_CFG_SRC7)
#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC7)
#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7)
/*
* System Performance Counter Control Register (Table 32)
* Register: PERF_CNT_CFG_1
* BCM1480 specific
*/
#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
#if SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR
#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE
#endif
/*
* System Performance Counters (Table 33)
* Registers: PERF_CNT_x
*/
#define S_BCM1480_SPC_CNT_COUNT 0
#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)
#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40)
/*
* Bus Watcher Error Status Register (Tables 36, 37)
* Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
* Same as BCM1250.
*/
/*
* Bus Watcher Error Data Registers (Table 38)
* Registers: BUS_ERR_DATA_x
* Same as BCM1250.
*/
/*
* Bus Watcher L2 ECC Counter Register (Table 39)
* Register: BUS_L2_ERRORS
* Same as BCM1250.
*/
/*
* Bus Watcher Memory and I/O Error Counter Register (Table 40)
* Register: BUS_MEM_IO_ERRORS
* Same as BCM1250.
*/
/*
* Address Trap Registers
*
* Register layout same as BCM1250, almost. The bus agents
* are different, and the address trap configuration bits are
* slightly different.
*/
#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4,0)
#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
#define S_BCM1480_ATRAP_CFG_CNT 0
#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)
#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5)
#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
#define S_BCM1480_ATRAP_CFG_AGENTID 8
#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)
#define K_BCM1480_BUS_AGENT_CPU0 0
#define K_BCM1480_BUS_AGENT_CPU1 1
#define K_BCM1480_BUS_AGENT_NC 2
#define K_BCM1480_BUS_AGENT_IOB 3
#define K_BCM1480_BUS_AGENT_SCD 4
#define K_BCM1480_BUS_AGENT_L2C 6
#define K_BCM1480_BUS_AGENT_MC 7
#define K_BCM1480_BUS_AGENT_CPU2 8
#define K_BCM1480_BUS_AGENT_CPU3 9
#define K_BCM1480_BUS_AGENT_PM 10
#define S_BCM1480_ATRAP_CFG_CATTR 12
#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)
#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0
#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1
#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2
#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3
#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14)
/*
* Trace Event Registers (Table 47)
* Same as BCM1250.
*/
/*
* Trace Sequence Control Registers (Table 48)
* Registers: TRACE_SEQUENCE_x
*
* Same as BCM1250 except for two new fields.
*/
#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25)
#define S_BCM1480_SCD_TRSEQ_SWFUNC 26
#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)
/*
* Trace Control Register (Table 49)
* Register: TRACE_CFG
*
* BCM1480 changes to this register (other than location of the CUR_ADDR field)
* are defined below.
*/
#define S_BCM1480_SCD_TRACE_CFG_MODE 16
#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)
#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0
#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
#endif /* _BCM1480_SCD_H */