/* $NetBSD: scn.c,v 1.8 2015/04/04 14:12:40 macallan Exp $ */
/*
* Resurrected from the old pc532 port 1/18/2009.
*
* XXX- The locking in this is probably totally broken. I haven't attempted
* to get it right, but it seems to work okay anyhow.
*/
/*
* Copyright (c) 1991, 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* Portions of this software were developed by the Computer Systems
* Engineering group at Lawrence Berkeley Laboratory under DARPA
* contract BG 91-66 and contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
*/
/*
* Copyright (c) 1996, 1997 Philip L. Budne.
* Copyright (c) 1993 Philip A. Nelson.
*
* Portions of this software were developed by the Computer Systems
* Engineering group at Lawrence Berkeley Laboratory under DARPA
* contract BG 91-66 and contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: scn.c,v 1.8 2015/04/04 14:12:40 macallan Exp $");
#include "opt_ddb.h"
#include "opt_kgdb.h"
#include "scn.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/select.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/types.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <sys/intr.h>
#ifdef KGDB
#include <sys/kgdb.h>
#endif
#include <sys/kauth.h>
#include <dev/cons.h>
#include <machine/autoconf.h>
#include <machine/machtype.h>
#include <sgimips/dev/scnreg.h>
#include <sgimips/dev/scnvar.h>
int scn_match(device_t, struct cfdata *, void *);
void scn_attach(device_t, device_t, void *);
int scnparam(struct tty *, struct termios *);
void scnstart(struct tty *);
int scnhwiflow(struct tty *, int);
void scncnprobe(struct consdev *);
void scncninit(struct consdev *);
int scncngetc(dev_t);
void scncnputc(dev_t, int);
void scncnpollc(dev_t, int);
int scninit(dev_t, int);
void scncnreinit(void *);
CFATTACH_DECL_NEW(scn, sizeof(struct scn_softc),
scn_match, scn_attach, NULL, NULL);
extern struct cfdriver scn_cd;
dev_type_open(scnopen);
dev_type_close(scnclose);
dev_type_read(scnread);
dev_type_write(scnwrite);
dev_type_ioctl(scnioctl);
dev_type_stop(scnstop);
dev_type_tty(scntty);
dev_type_poll(scnpoll);
const struct cdevsw scn_cdevsw = {
.d_open = scnopen,
.d_close = scnclose,
.d_read = scnread,
.d_write = scnwrite,
.d_ioctl = scnioctl,
.d_stop = scnstop,
.d_tty = scntty,
.d_poll = scnpoll,
.d_mmap = nommap,
.d_kqfilter = ttykqfilter,
.d_discard = nodiscard,
.d_flag = D_TTY
};
struct consdev scn_cn = {
scncnprobe,
scncninit,
scncngetc,
scncnputc,
scncnpollc,
NULL,
NULL,
NULL,
NODEV,
CN_NORMAL
};
#ifndef CONSOLE_SPEED
#define CONSOLE_SPEED TTYDEF_SPEED
#endif
#ifndef SCNDEF_CFLAG
#define SCNDEF_CFLAG TTYDEF_CFLAG
#endif
#ifdef CPU30MHZ
#define RECOVER() __asm volatile("bispsrw 0x800" : : : "cc")
#else
#define RECOVER()
#endif
int scndefaultrate = TTYDEF_SPEED;
int scnconsrate = CONSOLE_SPEED;
static inline struct scn_softc *
SOFTC(int unit)
{
if (unit < 0 || unit >= scn_cd.cd_ndevs)
return (NULL);
return device_private(scn_cd.cd_devs[unit]);
}
static int scnintr(void *);
static void scnrxintr(void *);
static int scn_rxintr(struct scn_softc *);
static void scnsoft(void *);
static void scn_setchip(struct scn_softc *sc);
static int scniter(int *, int, int*, int*, struct chan *, int);
static int scn_config(int, int, int, int, u_char, u_char);
static void scn_rxenable(struct scn_softc *);
static void scn_rxdisable(struct scn_softc *);
static void dcd_int(struct scn_softc *, struct tty *, u_char);
static void scnoverrun(int, long *, const char *);
static u_char opbits(struct scn_softc *, int);
static void *scnsir = NULL; /* s/w intr cookie */
#define setsoftscn() softint_schedule(scnsir)
#ifdef SCN_TIMING
/*
* Keep timing info on latency of software interrupt used by
* the ringbuf code to empty ring buffer.
* "getinfo" program reads data from /dev/kmem.
*/
static struct timeval tstart;
#define NJITTER 100
int scn_njitter = NJITTER;
int scn_jitter[NJITTER];
#endif
#define SCN_CLOCK 3686400 /* input clock */
/* speed table groups ACR[7] */
#define GRP_A 0
#define GRP_B ACR_BRG
/* combo of MR0[2:0] and ACR[7] */
#define MODE0A MR0_MODE_0
#define MODE0B (MR0_MODE_0|ACR_BRG)
#define MODE1A MR0_MODE_1
#define MODE1B (MR0_MODE_1|ACR_BRG)
#define MODE2A MR0_MODE_2
#define MODE2B (MR0_MODE_2|ACR_BRG)
#define ANYMODE -1
#define DEFMODE(C92) MODE0A /* use MODE4A if 26c92? */
/* speed code for Counter/Timer (all modes, groups) */
#define USE_CT 0xd
/*
* Rate table, ordered by speed, then mode.
* NOTE: ordering of modes must be done carefully!
*/
struct tabent {
int32_t speed;
int16_t code;
int16_t mode;
} table[] = {
{ 50, 0x0, MODE0A },
{ 75, 0x0, MODE0B },
{ 110, 0x1, MODE0A },
{ 110, 0x1, MODE0B },
{ 110, 0x1, MODE1A },
{ 110, 0x1, MODE1B },
{ 134, 0x2, MODE0A }, /* 134.5 */
{ 134, 0x2, MODE0B }, /* 134.5 */
{ 134, 0x2, MODE1A }, /* 134.5 */
{ 134, 0x2, MODE1B }, /* 134.5 */
{ 150, 0x3, MODE0A },
{ 150, 0x3, MODE0A },
{ 200, 0x3, MODE0A },
{ 300, 0x4, MODE0A },
{ 300, 0x4, MODE0B },
{ 300, 0x0, MODE1A },
{ 450, 0x0, MODE1B },
{ 600, 0x5, MODE0A },
{ 600, 0x5, MODE0B },
{ 880, 0x1, MODE2A },
{ 880, 0x1, MODE2B },
{ 900, 0x3, MODE1B },
{ 1050, 0x7, MODE0A },
{ 1050, 0x7, MODE1A },
{ 1076, 0x2, MODE2A },
{ 1076, 0x2, MODE2B },
{ 1200, 0x6, MODE0A },
{ 1200, 0x6, MODE0B },
{ 1200, 0x3, MODE1A },
{ 1800, 0xa, MODE0B },
{ 1800, 0x4, MODE1A },
{ 1800, 0x4, MODE1B },
{ 2000, 0x7, MODE0B },
{ 2000, 0x7, MODE1B },
{ 2400, 0x8, MODE0A },
{ 2400, 0x8, MODE0B },
{ 3600, 0x5, MODE1A },
{ 3600, 0x5, MODE1B },
{ 4800, 0x9, MODE2A },
{ 4800, 0x9, MODE2B },
{ 4800, 0x9, MODE0A },
{ 4800, 0x9, MODE0B },
{ 7200, 0xa, MODE0A },
{ 7200, 0x0, MODE2B },
{ 7200, 0x6, MODE1A },
{ 7200, 0x6, MODE1B },
{ 9600, 0xb, MODE2A },
{ 9600, 0xb, MODE2B },
{ 9600, 0xb, MODE0A },
{ 9600, 0xb, MODE0B },
{ 9600, 0xd, MODE1A }, /* use C/T as entre' to mode1 */
{ 9600, 0xd, MODE1B }, /* use C/T as entre' to mode1 */
{ 14400, 0x3, MODE2B },
{ 14400, 0x8, MODE1A },
{ 14400, 0x8, MODE1B },
{ 19200, 0x3, MODE2A },
{ 19200, 0xc, MODE2B },
{ 19200, 0xc, MODE0B },
{ 19200, 0xd, MODE1A }, /* use C/T as entre' to mode1 */
{ 19200, 0xd, MODE1B }, /* use C/T as entre' to mode1 */
{ 28800, 0x4, MODE2A },
{ 28800, 0x4, MODE2B },
{ 28800, 0x9, MODE1A },
{ 28800, 0x9, MODE1B },
{ 38400, 0xc, MODE2A },
{ 38400, 0xc, MODE0A },
{ 57600, 0x5, MODE2A },
{ 57600, 0x5, MODE2B },
{ 57600, 0xb, MODE1A },
{ 57600, 0xb, MODE1B },
{ 115200, 0x6, MODE2A },
{ 115200, 0x6, MODE2B },
{ 115200, 0xc, MODE1B },
{ 230400, 0xc, MODE1A }
};
#define TABENTRIES (sizeof(table)/sizeof(table[0]))
/*
* boolean for speed codes which are identical in both A/B BRG groups
* in all modes
*/
static u_char bothgroups[16] = {
0, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 1, 0, 1, 1, 1
};
/*
* Manually constructed divisors table
* for minimum error (from some of Dave Rand's code)
*/
const struct {
uint16_t speed;
uint16_t div;
} divs[] = {
{ 50, 2303 }, /* 2304 is exact?? */
{ 110, 1047 }, /* Should be 1047.27 */
{ 134, 857 }, /* Should be 856.505576 */
{ 1050, 110 }, /* Should be 109.7142857 */
{ 2000, 57 } /* Should be 57.6 */
};
#define DIVS (sizeof(divs)/sizeof(divs[0]))
/*
* minor unit bit decode:
* CxxxUUU
*
* C - carrier
* 0 - delay open until carrier high
* 1 - allow open with carrier low
* UUU - unit 0-7
*/
#define DEV_UNIT(x) (minor(x) & 0x7)
#define DEV_DIALOUT(x) (minor(x) & 0x80)
extern struct tty *constty;
#define SCN_MAXDUART 4
static struct duart scn_duart[SCN_MAXDUART];
#ifdef KGDB
extern int kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
/* XXXXX - fix this */
#define splrtty() spltty()
/* RS-232 configuration routines */
/*
* set chip parameters, or mark for delayed change.
* called at spltty() or on TxEMPTY interrupt.
*
* Reads current values to avoid glitches from redundant sets.
* Perhaps should save last value set to avoid read/write? NOTE:
* Would still need to do read if write not needed to advance MR
* pointer.
*
* new 2/97 -plb
*/
static void
scn_setchip(struct scn_softc *sc)
{
struct duart *dp;
u_char acr, csr, mr1, mr2;
int chan;
if (sc->sc_tty && (sc->sc_tty->t_state & TS_BUSY)) {
sc->sc_heldchanges = 1;
return;
}
chan = sc->sc_channel;
dp = sc->sc_duart;
if (dp->type == SC26C92) {
u_char nmr0a, mr0a;
/* input rate high enough so 64 bit time watchdog not
* onerous? */
if (dp->chan[chan].ispeed >= 1200) {
/* set FIFO threshold at 6 for other
* thresholds we could have to set MR1_FFULL
*/
dp->chan[chan].mr0 |= MR0_RXWD | MR0_RXINT;
} else {
dp->chan[chan].mr0 &= ~(MR0_RXWD | MR0_RXINT);
}
/* select BRG mode (MR0A only) */
nmr0a = dp->chan[0].mr0 | (dp->mode & MR0_MODE);
dp->base[CH_CR] = CR_CMD_MR0;
RECOVER();
mr0a = dp->base[CH_MR];
if (mr0a != nmr0a) {
dp->base[CH_CR] = CR_CMD_MR0;
RECOVER();
dp->base[CH_MR] = nmr0a;
}
if (chan) { /* channel B? */
u_char mr0b;
sc->sc_chbase[CH_CR] = CR_CMD_MR0;
RECOVER();
mr0b = dp->base[CH_MR];
if (dp->chan[chan].mr0 != mr0b) {
sc->sc_chbase[CH_CR] = CR_CMD_MR0;
RECOVER();
sc->sc_chbase[CH_MR] = dp->chan[chan].mr0;
}
}
} else {
sc->sc_chbase[CH_CR] = CR_CMD_MR1;
RECOVER();
}
mr1 = sc->sc_chbase[CH_MR];
mr2 = sc->sc_chbase[CH_MR];
if (mr1 != dp->chan[chan].new_mr1 ||
mr2 != dp->chan[chan].new_mr2) {
sc->sc_chbase[CH_CR] = CR_CMD_MR1;
RECOVER();
sc->sc_chbase[CH_MR] = dp->chan[chan].new_mr1;
sc->sc_chbase[CH_MR] = dp->chan[chan].new_mr2;
}
acr = dp->acr | (dp->mode & ACR_BRG);
dp->base[DU_ACR] = acr; /* write-only reg! */
/* set speed codes */
csr = (dp->chan[chan].icode<<4) | dp->chan[chan].ocode;
if (sc->sc_chbase[CH_CSR] != csr) {
sc->sc_chbase[CH_CSR] = csr;
}
/* see if counter/timer in use */
if (dp->counter &&
(dp->chan[0].icode == USE_CT || dp->chan[0].ocode == USE_CT ||
dp->chan[1].icode == USE_CT || dp->chan[1].ocode == USE_CT)) {
/* program counter/timer only if necessary */
if (dp->counter != dp->ocounter) {
uint16_t div;
#ifdef DIVS
int i;
/* look for precalculated rate, for minimum error */
for (i = 0; i < DIVS && divs[i].speed <= dp->counter; i++) {
if (divs[i].speed == dp->counter) {
div = divs[i].div;
goto found;
}
}
#endif
/* not found in table; calculate a value (rounding up) */
div = ((long)SCN_CLOCK/16/2 + dp->counter/2) / dp->counter;
found:
/* halt before loading? may ALWAYS glitch?
* reload race may only sometimes glitch??
*/
dp->base[DU_CTUR] = div >> 8;
dp->base[DU_CTLR] = div & 255;
if (dp->ocounter == 0) {
/* not previously used? */
u_char temp;
/* start C/T running */
temp = dp->base[DU_CSTRT];
__USE(temp);
}
dp->ocounter = dp->counter;
}
} else {
/* counter not in use; mark as free */
dp->counter = 0;
}
sc->sc_heldchanges = 0;
/*
* delay a tiny bit to try and avoid tx glitching.
* I know we're at spltty(), but this is much better than the
* old version used DELAY((96000 / out_speed) * 10000)
* -plb
*/
DELAY(10);
}
/*
* iterator function for speeds.
* (could be called "findnextcode")
* Returns sequence of possible speed codes for a given rate.
* should set index to zero before first call.
*
* Could be implemented as a "checkspeed()" function called
* to evaluate table entries, BUT this allows more variety in
* use of C/T with fewer table entries.
*/
static int
scniter(int *index, int wanted, int *counter, int *mode, struct chan *other,
int c92)
{
while (*index < TABENTRIES) {
struct tabent *tp;
tp = table + (*index)++;
if (tp->speed != wanted)
continue;
/* if not a 26C92 only look at MODE0 entries */
if (!c92 && (tp->mode & MR0_MODE) != MR0_MODE_0)
continue;
/*
* check mode;
* OK if this table entry for current mode, or mode not
* yet set, or other channel's rates are available in both
* A and B groups.
*/
if (tp->mode == *mode || *mode == ANYMODE ||
(other != NULL && (tp->mode & MR0_MODE) == (*mode & MR0_MODE) &&
bothgroups[other->icode] && bothgroups[other->ocode])) {
/*
* for future table entries specifying
* use of counter/timer
*/
if (tp->code == USE_CT) {
if (*counter != wanted && *counter != 0)
continue; /* counter busy */
*counter = wanted;
}
*mode = tp->mode;
return tp->code;
}
}
/* here after returning all applicable table entries */
/* XXX return sequence of USE_CT with all possible modes?? */
if ((*index)++ == TABENTRIES) {
/* Max C/T rate (even on 26C92?) is 57600 */
if (wanted <= 57600 && (*counter == wanted || *counter == 0)) {
*counter = wanted;
return USE_CT;
}
}
return -1; /* FAIL */
}
/*
* calculate configuration
* rewritten 2/97 -plb
*/
static int
scn_config(int unit, int chan, int ispeed, int ospeed, u_char mr1, u_char mr2)
{
struct scn_softc *sc;
struct duart *dp;
int other; /* opposite of chan */
int mode;
int counter;
int i, o; /* input, output iterator indexes */
int ic, oc; /* input, output codes */
struct chan *ocp; /* other duart channel */
struct tty *otp; /* other channel tty struct */
int c92; /* true if duart is sc26c92 */
int s;
/* Set up softc pointer. */
if (unit >= scn_cd.cd_ndevs)
return ENXIO;
sc = SOFTC(unit);
chan = sc->sc_channel;
other = chan ^ 1;
dp = sc->sc_duart;
ocp = &dp->chan[other];
otp = ocp->tty;
c92 = (dp->type == SC26C92);
/*
* Right now the first combination that works is used.
* Perhaps it should search entire solution space for "best"
* combination. For example, use heuristic weighting of mode
* preferences, and use of counter timer?
*
* For example right now with 2681/2692 when default rate is
* 9600 and other channel is closed setting 19200 will pick
* mode 0a and use counter/timer. Better solution might be
* mode 0b, leaving counter/timer free!
*
* When other channel is open might want to prefer
* leaving counter timer free, or not flipping A/B group?
*/
if (otp && (otp->t_state & TS_ISOPEN)) {
/*
* Other channel open;
* Find speed codes compatible with current mode/counter.
*/
i = 0;
for (;;) {
mode = dp->mode;
counter = dp->counter;
/* NOTE: pass other chan pointer to allow group flipping */
ic = scniter(&i, ispeed, &counter, &mode, ocp, c92);
if (ic == -1)
break;
o = 0;
if ((oc = scniter(&o, ospeed, &counter,
&mode, NULL, c92)) != -1) {
/*
* take first match
*
* Perhaps calculate heuristic "score",
* save score,codes,mode,counter if score
* better than previous best?
*/
goto gotit;
}
}
/* XXX try looping for ospeed? */
} else {
/* other channel closed */
int oo, oi; /* other input, output iterators */
int oic, ooc; /* other input, output codes */
/*
* Here when other channel closed. Finds first
* combination that will allow other channel to be opened
* (with defaults) and fits our needs.
*/
oi = 0;
for (;;) {
mode = ANYMODE;
counter = 0;
oic = scniter(&oi, ocp->ispeed, &counter, &mode, NULL, c92);
if (oic == -1)
break;
oo = 0;
while ((ooc = scniter(&oo, ocp->ospeed, &counter,
&mode, NULL, c92)) != -1) {
i = 0;
while ((ic = scniter(&i, ispeed, &counter,
&mode, NULL, c92)) != -1) {
o = 0;
if ((oc = scniter(&o, ospeed, &counter,
&mode, NULL, c92)) != -1) {
/*
* take first match
*
* Perhaps calculate heuristic
* "score", save
* score,codes,mode,counter
* if score better than
* previous best?
*/
s = spltty();
dp->chan[other].icode = oic;
dp->chan[other].ocode = ooc;
goto gotit2;
}
}
}
}
}
return EINVAL;
gotit:
s = spltty();
gotit2:
dp->chan[chan].new_mr1 = mr1;
dp->chan[chan].new_mr2 = mr2;
dp->chan[chan].ispeed = ispeed;
dp->chan[chan].ospeed = ospeed;
dp->chan[chan].icode = ic;
dp->chan[chan].ocode = oc;
if (mode == ANYMODE) /* no mode selected?? */
mode = DEFMODE(c92);
dp->mode = mode;
dp->counter = counter;
scn_setchip(sc); /* set chip now, if possible */
splx(s);
return (0);
}
int
scn_match(device_t parent, struct cfdata *cf, void *aux)
{
struct mainbus_attach_args *ma = aux;
if ((mach_type == MACH_SGI_IP6 || mach_type == MACH_SGI_IP10) &&
ma->ma_addr == 0x1fb80004)
return (1);
return (0);
}
/*
* No need to make scn_rx{en,dis}able too efficient,
* they're only called on setup, open & close!
*/
static inline void
scn_rxenable(struct scn_softc *sc)
{
struct duart *dp;
int channel;
dp = sc->sc_duart;
channel = sc->sc_channel;
/* Outputs wire-ored and connected to ICU input for fast rx interrupt. */
if (channel == 0)
dp->opcr |= OPCR_OP4_RXRDYA;
else
dp->opcr |= OPCR_OP5_RXRDYB;
dp->base[DU_OPCR] = dp->opcr;
dp->imr |= sc->sc_rx_int;
dp->base[DU_IMR] = dp->imr;
}
static inline void
scn_rxdisable(struct scn_softc *sc)
{
struct duart *dp;
int channel;
dp = sc->sc_duart;
channel = sc->sc_channel;
/* Outputs wire-ored and connected to ICU input for fast rx interrupt. */
if (channel == 0)
dp->opcr &= ~OPCR_OP4_RXRDYA;
else
dp->opcr &= ~OPCR_OP5_RXRDYB;
dp->base[DU_OPCR] = dp->opcr;
dp->imr &= ~sc->sc_rx_int;
dp->base[DU_IMR] = dp->imr;
}
void
scn_attach(device_t parent, device_t self, void *aux)
{
struct mainbus_attach_args *ma = aux;
struct scn_softc *sc;
struct duart *duart;
volatile u_char *ch_base;
volatile u_char *duart_base;
int channel;
int speed;
int s;
int maj __diagused;
u_char unit;
u_char duartno;
u_char delim = ':';
u_char mr1, mr2;
enum scntype scntype = SCNUNK;
const char *duart_type = "Unknown";
bool console, first;
devmajor_t major;
(void)major;
sc = device_private(self);
unit = device_unit(self);
/* XXX - hard-coded */
if (ma->ma_addr == 0x1fb80004)
duartno = 1;
else
duartno = 0;
channel = 0;
console = 1;
duart = sc->sc_duart = &scn_duart[duartno];
duart->chan[channel].sc = sc;
first = (duart->base == NULL);
if (console) {
sc->sc_isconsole = 1;
sc->sc_swflags |= SCN_SW_SOFTCAR; /* ignore carrier */
}
duart_base = (volatile u_char *)MIPS_PHYS_TO_KSEG1(ma->ma_addr);
ch_base = duart_base; /* XXX */
if (first) {
/* Probe DUART type */
s = spltty();
if (console) {
ch_base[CH_CR] = CR_DIS_TX;
delay(5 * 10000);
}
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
mr1 = ch_base[CH_MR];
mr2 = ch_base[CH_MR];
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
ch_base[CH_MR] = 1;
ch_base[CH_MR] = 0;
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
if (ch_base[CH_MR] == 1) {
/* MR 2 selected */
ch_base[CH_CR] = CR_CMD_MR0;
RECOVER();
/* if 2681, MR2 still selected */
ch_base[CH_MR] = 1;
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
ch_base[CH_MR] = 0; /* MR1 */
ch_base[CH_MR] = 0; /* MR2 */
ch_base[CH_CR] = CR_CMD_MR0;
RECOVER();
/* if 2681, MR2 still selected */
if((ch_base[CH_MR] & 1) == 1) {
duart_type = "sc26c92";
scntype = SC26C92;
} else {
/* 2681 treats as MR1 Select */
ch_base[CH_CR] = CR_CMD_RTS_OFF;
RECOVER();
ch_base[CH_MR] = 1;
ch_base[CH_MR] = 0;
ch_base[CH_CR] = CR_CMD_RTS_OFF;
RECOVER();
if (ch_base[CH_MR] == 1) {
duart_type = "scn2681";
scntype = SCN2681;
} else {
duart_type = "scn2692";
scntype = SCN2692;
}
}
}
/* If a 2681, the CR_CMD_MR0 is interpreted as a TX_RESET */
if (console) {
ch_base[CH_CR] = CR_ENA_TX;
RECOVER();
}
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
ch_base[CH_MR] = mr1;
ch_base[CH_MR] = mr2;
splx(s);
/*
* On IP6 the console chip is duart1. The keyboard/mouse
* is duart0. Each chip has two channels and the channels
* share an interrupt. Duart0 is interrupt 0, duart1 is
* interrupt 1.
*/
if (duartno != 0 && duartno != 1)
panic("scn_attach: bad duartno: %d", duartno);
cpu_intr_establish(duartno, IPL_TTY, scnintr, duart);
printf("%c %s", delim, duart_type);
delim = ',';
duart->base = duart_base;
duart->type = scntype;
}
/* Record channel, uart */
sc->sc_channel = channel;
sc->sc_chbase = ch_base;
/* Initialize modem/interrupt bit masks */
if (channel == 0) {
sc->sc_op_rts = OP_RTSA;
sc->sc_op_dtr = OP_DTRA;
sc->sc_ip_cts = IP_CTSA;
sc->sc_ip_dcd = IP_DCDA;
sc->sc_tx_int = INT_TXA;
sc->sc_rx_int = INT_RXA;
} else {
sc->sc_op_rts = OP_RTSB;
sc->sc_op_dtr = OP_DTRB;
sc->sc_ip_cts = IP_CTSB;
sc->sc_ip_dcd = IP_DCDB;
sc->sc_tx_int = INT_TXB;
sc->sc_rx_int = INT_RXB;
}
/* Initialize counters */
sc->sc_framing_errors = 0;
sc->sc_fifo_overruns = 0;
sc->sc_parity_errors = 0;
sc->sc_breaks = 0;
if (console) {
DELAY(5 * 10000); /* Let the output go out.... */
}
/*
* Set up the hardware to a base state, in particular:
* o reset transmitter and receiver
* o set speeds and configurations
* o receiver interrupts only (RxRDY and BREAK)
*/
s = spltty();
/* RTS off... */
SCN_OP_BIC(sc, sc->sc_op_rts); /* "istop" */
ch_base[CH_CR] = CR_DIS_RX | CR_DIS_TX;
RECOVER();
ch_base[CH_CR] = CR_CMD_RESET_RX;
RECOVER();
ch_base[CH_CR] = CR_CMD_RESET_TX;
RECOVER();
ch_base[CH_CR] = CR_CMD_RESET_ERR;
RECOVER();
ch_base[CH_CR] = CR_CMD_RESET_BRK;
RECOVER();
ch_base[CH_CR] = CR_CMD_MR1;
RECOVER();
/* No receiver control of RTS. */
ch_base[CH_MR] = 0;
ch_base[CH_MR] = 0;
/* Initialize the uart structure if this is channel A. */
if (first) {
/* Disable all interrupts. */
duart_base[DU_IMR] = duart->imr = 0;
/* Output port config */
duart_base[DU_OPCR] = duart->opcr = 0;
/* Speeds... */
duart->mode = 0;
/*
* Set initial speed to an illegal code that can be changed to
* any other baud.
*/
duart->chan[0].icode = duart->chan[0].ocode = 0x2f;
duart->chan[1].icode = duart->chan[1].ocode = 0x2f;
duart->chan[0].ispeed = duart->chan[0].ospeed = 0;
duart->chan[1].ispeed = duart->chan[1].ospeed = 0;
duart->acr = 0;
duart->acr |= ACR_CT_TCLK1; /* timer mode 1x clk */
}
if (channel == 0) {
duart->acr |= ACR_DELTA_DCDA; /* Set CD int */
} else {
duart->acr |= ACR_DELTA_DCDB; /* Set CD int */
}
if (scnsir == NULL) {
/* software intr: calls tty code, hence IPL_TTY */
scnsir = softint_establish(SOFTINT_SERIAL, scnsoft, NULL);
}
duart_base[DU_ACR] = (duart->mode & ACR_BRG) | duart->acr;
if (console)
speed = scnconsrate;
else
speed = scndefaultrate;
scn_config(unit, channel, speed, speed, MR1_PNONE | MR1_CS8, MR2_STOP1);
if (console) {
maj = cdevsw_lookup_major(&scn_cdevsw);
KASSERT(maj != NODEVMAJOR);
shutdownhook_establish(scncnreinit, NULL);
/* Make sure console can do scncngetc */
duart_base[DU_OPSET] = channel ? (OP_RTSB | OP_DTRB) :
(OP_RTSA | OP_DTRA);
}
/* Turn on the receiver and transmitters */
ch_base[CH_CR] = CR_ENA_RX | CR_ENA_TX;
/* Set up the interrupts. */
duart->imr |= INT_IP;
scn_rxdisable(sc);
splx(s);
if (sc->sc_swflags) {
printf("%c flags %d", delim, sc->sc_swflags);
delim = ',';
}
#ifdef KGDB
major = cdevsw_lookup_major(&scn_cdevsw);
KASSERT(major != NODEVMAJOR);
if (kgdb_dev == makedev(major, unit)) {
if (console)
kgdb_dev = NODEV; /* can't debug over console port */
else {
scninit(kgdb_dev, kgdb_rate);
scn_rxenable(sc);
scn->sc_iskgdb = 1;
kgdb_attach(scncngetc, scncnputc, kgdb_dev);
if (kgdb_debug_init) {
printf("%c ", delim);
kgdb_connect(1);
} else
printf("%c kgdb enabled", delim);
delim = ',';
}
}
#endif
printf("\n");
}
/* ARGSUSED */
int
scnopen(dev_t dev, int flags, int mode, struct lwp *l)
{
struct tty *tp;
int unit = DEV_UNIT(dev);
struct scn_softc *sc;
int error = 0;
if (unit >= scn_cd.cd_ndevs)
return ENXIO;
sc = SOFTC(unit);
if (!sc)
return ENXIO;
tp = sc->sc_tty;
if (!tp) {
tp = tty_alloc();
sc->sc_tty = sc->sc_duart->chan[sc->sc_channel].tty = tp;
tty_attach(tp);
}
tp->t_oproc = scnstart;
tp->t_param = scnparam;
tp->t_hwiflow = scnhwiflow;
tp->t_dev = dev;
if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
return (EBUSY);
mutex_spin_enter(&tty_lock);
if ((tp->t_state & TS_ISOPEN) == 0 && tp->t_wopen == 0) {
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = SCNDEF_CFLAG;
sc->sc_rx_blocked = 0;
if (sc->sc_swflags & SCN_SW_CLOCAL)
tp->t_cflag |= CLOCAL;
if (sc->sc_swflags & SCN_SW_CRTSCTS)
tp->t_cflag |= CCTS_OFLOW | CRTS_IFLOW;
tp->t_lflag = TTYDEF_LFLAG;
if (sc->sc_isconsole)
tp->t_ispeed = tp->t_ospeed = scnconsrate;
else
tp->t_ispeed = tp->t_ospeed = scndefaultrate;
scnparam(tp, &tp->t_termios);
ttsetwater(tp);
/* Turn on DTR and RTS. */
SCN_OP_BIS(sc, sc->sc_op_rts | sc->sc_op_dtr);
/* enable receiver interrupts */
scn_rxenable(sc);
/* set carrier state; */
if ((sc->sc_swflags & SCN_SW_SOFTCAR) || /* check ttyflags */
SCN_DCD(sc) || /* check h/w */
DEV_DIALOUT(dev))
tp->t_state |= TS_CARR_ON;
else
tp->t_state &= ~TS_CARR_ON;
}
mutex_spin_exit(&tty_lock);
error = ttyopen(tp, SCN_DIALOUT(sc), flags & O_NONBLOCK);
if (error) printf("ttyopen failed line %d, error %d\n", __LINE__, error);
if (error)
goto bad;
error = (*tp->t_linesw->l_open) (dev, tp);
if (error) printf("l_open failed line %d, error %d\n", __LINE__, error);
if (error)
goto bad;
return (0);
bad:
if ((tp->t_state & TS_ISOPEN) == 0 && tp->t_wopen == 0) {
scn_rxdisable(sc);
SCN_OP_BIC(sc, sc->sc_op_rts | sc->sc_op_dtr);
}
return (error);
}
/*ARGSUSED*/
int
scnclose(dev_t dev, int flags, int mode, struct lwp *l)
{
int unit = DEV_UNIT(dev);
struct scn_softc *sc = SOFTC(unit);
struct tty *tp = sc->sc_tty;
devmajor_t major;
(void)major;
if ((tp->t_state & TS_ISOPEN) == 0)
return 0;
(*tp->t_linesw->l_close) (tp, flags);
#ifdef KGDB
/* do not disable interrupts if debugging */
major = cdevsw_lookup_major(&scn_devsw);
KASSERT(major != cdevsw_lookup_major);
if (kgdb_dev != makedev(major, unit))
#endif
if ((tp->t_state & TS_ISOPEN) == 0) {
scn_rxdisable(sc);
}
if ((tp->t_cflag & HUPCL) && (sc->sc_swflags & SCN_SW_SOFTCAR) == 0) {
SCN_OP_BIC(sc, sc->sc_op_dtr);
/* hold low for 1 second */
tsleep(sc, TTIPRI, ttclos, hz);
}
SCN_CLRDIALOUT(sc);
ttyclose(tp);
#if 0
if ((tp->t_state & TS_ISOPEN) == 0) {
tty_free(tp);
sc->sc_tty = (struct tty *) NULL;
}
#endif
return (0);
}
int
scnread(dev_t dev, struct uio *uio, int flags)
{
struct scn_softc *sc = SOFTC(DEV_UNIT(dev));
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_read) (tp, uio, flags));
}
int
scnwrite(dev_t dev, struct uio *uio, int flags)
{
struct scn_softc *sc = SOFTC(DEV_UNIT(dev));
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_write) (tp, uio, flags));
}
int
scnpoll(dev_t dev, int events, struct lwp *l)
{
struct scn_softc *sc = SOFTC(DEV_UNIT(dev));
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_poll)(tp, events, l));
}
struct tty *
scntty(dev_t dev)
{
struct scn_softc *sc = SOFTC(DEV_UNIT(dev));
return sc->sc_tty;
}
/* Worker routines for interrupt processing */
static inline void
dcd_int(struct scn_softc *sc, struct tty *tp, u_char new)
{
if (sc->sc_swflags & SCN_SW_SOFTCAR)
return;
#if 0
printf("scn%d: dcd_int ip %x SCN_DCD %x new %x ipcr %x\n",
sc->unit,
sc->sc_duart->base[DU_IP],
SCN_DCD(sc),
new,
sc->sc_duart->base[DU_IPCR]
);
#endif
/* XXX set some flag to have some lower (soft) int call line discipline? */
if (!(*tp->t_linesw->l_modem) (tp, new == 0? 1: 0)) {
SCN_OP_BIC(sc, sc->sc_op_rts | sc->sc_op_dtr);
}
}
/*
* Print out a ring or fifo overrun error message.
*/
static void
scnoverrun(int unit, long *ptime, const char *what)
{
if (*ptime != time_second) {
*ptime = time_second;
log(LOG_WARNING, "scn%d: %s overrun\n", unit, what);
}
}
/*
* Try to block or unblock input using hardware flow-control.
* This is called by kern/tty.c if MDMBUF|CRTSCTS is set, and
* if this function returns non-zero, the TS_TBLOCK flag will
* be set or cleared according to the "stop" arg passed.
*/
int
scnhwiflow(struct tty *tp, int stop)
{
int unit = DEV_UNIT(tp->t_dev);
struct scn_softc *sc = SOFTC(unit);
int s;
s = splrtty();
if (!stop) {
if (sc->sc_rbput - sc->sc_rbget - 1) {
setsoftscn();
}
}
splx(s);
return 1;
}
static int
scnintr(void *arg)
{
struct duart *duart = arg;
struct scn_softc *sc0 = duart->chan[0].sc;
struct scn_softc *sc1 = duart->chan[1].sc;
struct tty *tp0 = (sc0 != NULL) ? sc0->sc_tty : NULL;
struct tty *tp1 = (sc1 != NULL) ? sc1->sc_tty : NULL;
char rs_work;
u_char rs_stat;
u_char rs_ipcr;
/* Check for RX interrupts first, since we cannot distinguish by irq. */
scnrxintr(duart);
do {
/* Loop to pick up ALL pending interrupts for device. */
rs_work = false;
rs_stat = duart->base[DU_ISR];
/* channel a */
if (tp0 != NULL) {
if ((rs_stat & INT_TXA) && (tp0->t_state & TS_BUSY)) {
/* output char done. */
tp0->t_state &= ~(TS_BUSY | TS_FLUSH);
/* disable tx ints */
duart->imr &= ~sc0->sc_tx_int;
duart->base[DU_IMR] = duart->imr;
if (sc0->sc_heldchanges) {
scn_setchip(sc0);
}
(*tp0->t_linesw->l_start) (tp0);
rs_work = true;
}
}
/* channel b */
if (tp1 != NULL) {
if ((rs_stat & INT_TXB) && (tp1->t_state & TS_BUSY)) {
/* output char done. */
tp1->t_state &= ~(TS_BUSY | TS_FLUSH);
/* disable tx ints */
duart->imr &= ~sc1->sc_tx_int;
duart->base[DU_IMR] = duart->imr;
if (sc1->sc_heldchanges) {
scn_setchip(sc1);
}
(*tp1->t_linesw->l_start) (tp1);
rs_work = true;
}
}
if (rs_stat & INT_IP) {
rs_work = true;
rs_ipcr = duart->base[DU_IPCR];
if (rs_ipcr & IPCR_DELTA_DCDA && tp0 != NULL) {
dcd_int(sc0, tp0, rs_ipcr & IPCR_DCDA);
}
if (rs_ipcr & IPCR_DELTA_DCDB && tp1 != NULL) {
dcd_int(sc1, tp1, rs_ipcr & IPCR_DCDB);
}
}
} while (rs_work);
return (1); /* ? */
}
/*
* Handle rxrdy/ffull interrupt: QUICKLY poll both channels (checking
* status first) and stash data in a ring buffer. Ring buffer scheme
* borowed from sparc/zs.c requires NO interlock on data!
*
* This interrupt should NOT be included in spltty() mask since it
* invokes NO tty code! The whole point is to allow tty input as much
* of the time as possible, while deferring "heavy" character
* processing until later.
*
* see scn.hw.README and scnsoft() for more info.
*
* THIS ROUTINE SHOULD BE KEPT AS CLEAN AS POSSIBLE!!
* IT'S A CANDIDATE FOR RECODING IN ASSEMBLER!!
*/
static inline int
scn_rxintr(struct scn_softc *sc)
{
char sr;
int i, n;
int work;
work = 0;
i = sc->sc_rbput;
while (work <= 10) {
#define SCN_GETCH(SC) \
sr = (SC)->sc_chbase[CH_SR]; \
if ((sr & SR_RX_RDY) == 0) \
break; \
if (sr & (SR_PARITY | SR_FRAME | SR_BREAK | SR_OVERRUN)) \
goto exception; \
work++; \
(SC)->sc_rbuf[i++ & SCN_RING_MASK] = (SC)->sc_chbase[CH_DAT]
SCN_GETCH(sc); SCN_GETCH(sc); SCN_GETCH(sc);
/* XXX more here if 26C92? -plb */
continue;
exception:
#if defined(DDB)
if (sc->sc_isconsole && (sr & SR_BREAK)) {
Debugger();
sr = sc->sc_chbase[CH_SR];
}
#endif
#if defined(KGDB)
if (sc->sc_iskgdb && (sr & SR_RX_RDY)) {
kgdb_connect(1);
sr = sc->sc_chbase[CH_SR];
}
#endif
work++;
sc->sc_rbuf[i++ & SCN_RING_MASK] = (sr << 8) | sc->sc_chbase[CH_DAT];
sc->sc_chbase[CH_CR] = CR_CMD_RESET_ERR; /* resets break? */
RECOVER();
}
/*
* If ring is getting too full, try to block input.
*/
n = i - sc->sc_rbget;
if (sc->sc_rbhiwat && (n > sc->sc_rbhiwat)) {
/* If not CRTSCTS sc_rbhiwat is such that this
* never happens.
* Clear RTS
*/
SCN_OP_BIC(sc, sc->sc_op_rts);
sc->sc_rx_blocked = 1;
}
sc->sc_rbput = i;
return work;
}
static void
scnrxintr(void *arg)
{
struct duart *duart = arg;
int work = 0;
if (duart->chan[0].sc != NULL)
work += scn_rxintr(duart->chan[0].sc);
if (duart->chan[1].sc != NULL)
work += scn_rxintr(duart->chan[1].sc);
if (work > 0) {
setsoftscn(); /* trigger s/w intr */
#ifdef SCN_TIMING
microtime(&tstart);
#endif
}
}
/*
* Here on soft interrupt (at spltty) to empty ring buffers.
*
* Dave's original scheme was to use the DUART receiver timeout
* interrupt. This requires 2692's (which my board doesn't have), and
* I also liked the idea of using the C/T to generate alternate and/or
* arbitrary bauds. -plb
*
* The ringbuffer code comes from Chris Torek's SPARC 44bsd zs driver
* (hence the LBL notice on top of this file), DOES NOT require
* interlocking with interrupt levels!
*
* The 44bsd sparc/zs driver reads the ring buffer from a separate
* zssoftint, while the SunOS 4.x zs driver appears to use
* timeout()'s. timeouts seem to be too slow to deal with high data
* rates. I know, I tried them.
* -plb.
*/
static void
scnsoft(void *arg)
{
int s, unit;
#ifdef SCN_TIMING
struct timeval tend;
u_long t;
microtime(&tend);
t = (tend.tv_sec - tstart.tv_sec) * 1000000 + (tend.tv_usec - tstart.tv_usec);
t = (t + tick / 20) / (tick / 10);
if (t >= NJITTER - 1) {
t = NJITTER - 1;
}
scn_jitter[t]++;
#endif
for (unit = 0; unit < scn_cd.cd_ndevs; unit++) {
struct scn_softc *sc;
struct tty *tp;
int n, get;
sc = SOFTC(unit);
if (sc == NULL) {
continue;
}
tp = sc->sc_tty;
#ifdef KGDB
if (tp == NULL) {
sc->sc_rbget = sc->sc_rbput;
continue;
}
#endif
if (tp == NULL || tp->t_state & TS_TBLOCK) {
continue;
}
get = sc->sc_rbget;
/* NOTE: fetch from rbput is atomic */
while (get != (n = sc->sc_rbput)) {
/*
* Compute the number of interrupts in the receive ring.
* If the count is overlarge, we lost some events, and
* must advance to the first valid one. It may get
* overwritten if more data are arriving, but this is
* too expensive to check and gains nothing (we already
* lost out; all we can do at this point is trade one
* kind of loss for another).
*/
n -= get;
if (n > SCN_RING_SIZE) {
scnoverrun(unit, &sc->sc_rotime, "ring");
get += n - SCN_RING_SIZE;
n = SCN_RING_SIZE;
sc->sc_ring_overruns++;
}
while (--n >= 0) {
int c, sr;
if (tp->t_state & TS_TBLOCK) {
sc->sc_rbget = get;
goto done;
}
/* Race to keep ahead of incoming interrupts. */
c = sc->sc_rbuf[get++ & SCN_RING_MASK];
sr = c >> 8; /* extract status */
c &= 0xff; /* leave just character */
if (sr & SR_OVERRUN) {
scnoverrun(unit, &sc->sc_fotime, "fifo");
sc->sc_fifo_overruns++;
}
if (sr & SR_PARITY) {
c |= TTY_PE;
sc->sc_parity_errors++;
}
if (sr & SR_FRAME) {
c |= TTY_FE;
sc->sc_framing_errors++;
}
if (sr & SR_BREAK) {
#if 0
/*
* See DDB_CHECK() comments in
* scnrxintr()
*/
if (sc->sc_isconsole)
Debugger();
#endif
c = TTY_FE | 0;
sc->sc_breaks++;
}
(*tp->t_linesw->l_rint) (c, tp);
if (sc->sc_rx_blocked && n < SCN_RING_THRESH) {
s = splrtty();
sc->sc_rx_blocked = 0;
SCN_OP_BIS(sc, sc->sc_op_rts);
splx(s);
}
}
sc->sc_rbget = get;
}
done: ;
}
}
/* Convert TIOCM_xxx bits to output port bits. */
static unsigned char
opbits(struct scn_softc *sc, int tioc_bits)
{
return ((((tioc_bits) & TIOCM_DTR) ? sc->sc_op_dtr : 0) |
(((tioc_bits) & TIOCM_RTS) ? sc->sc_op_rts : 0));
}
int
scnioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l)
{
int unit = DEV_UNIT(dev);
struct scn_softc *sc = SOFTC(unit);
struct tty *tp = sc->sc_tty;
int error;
error = (*tp->t_linesw->l_ioctl) (tp, cmd, data, flags, l);
if (error != EPASSTHROUGH)
return (error);
error = ttioctl(tp, cmd, data, flags, l);
if (error != EPASSTHROUGH)
return (error);
switch (cmd) {
case TIOCSBRK:
sc->sc_chbase[CH_CR] = CR_CMD_START_BRK;
break;
case TIOCCBRK:
sc->sc_chbase[CH_CR] = CR_CMD_STOP_BRK;
break;
case TIOCSDTR:
SCN_OP_BIS(sc, sc->sc_op_dtr | sc->sc_op_rts);
break;
case TIOCCDTR:
SCN_OP_BIC(sc, sc->sc_op_dtr | sc->sc_op_rts);
break;
case TIOCMSET: {
int s;
unsigned char sbits, cbits;
/* set bits */
sbits = opbits(sc, *(int *) data);
/* get bits to clear */
cbits = ~sbits & (sc->sc_op_dtr | sc->sc_op_rts);
s = spltty();
if (sbits) {
SCN_OP_BIS(sc, sbits);
}
if (cbits) {
SCN_OP_BIC(sc, cbits);
}
splx(s);
break;
}
case TIOCMBIS:
SCN_OP_BIS(sc, opbits(sc, *(int *) data));
break;
case TIOCMBIC:
SCN_OP_BIC(sc, opbits(sc, *(int *) data));
break;
case TIOCMGET: {
int bits;
unsigned char ip;
/* s = spltty(); */
ip = sc->sc_duart->base[DU_IP];
/* splx(s); */
bits = 0;
if (ip & sc->sc_ip_dcd)
bits |= TIOCM_CD;
if (ip & sc->sc_ip_cts)
bits |= TIOCM_CTS;
#if 0
/*
* XXX sigh; cannot get op current state!! even if
* maintained in private, RTS is done in h/w!!
*/
unsigned char op = 0;
if (op & sc->sc_op_dtr)
bits |= TIOCM_DTR;
if (op & sc->sc_op_rts)
bits |= TIOCM_RTS;
#endif
*(int *) data = bits;
break;
}
case TIOCGFLAGS:{
int bits = 0;
if (sc->sc_swflags & SCN_SW_SOFTCAR)
bits |= TIOCFLAG_SOFTCAR;
if (sc->sc_swflags & SCN_SW_CLOCAL)
bits |= TIOCFLAG_CLOCAL;
if (sc->sc_swflags & SCN_SW_CRTSCTS)
bits |= TIOCFLAG_CRTSCTS;
if (sc->sc_swflags & SCN_SW_MDMBUF)
bits |= TIOCFLAG_MDMBUF;
*(int *) data = bits;
break;
}
case TIOCSFLAGS:{
int userbits, driverbits = 0;
error = kauth_authorize_device_tty(l->l_cred,
KAUTH_DEVICE_TTY_PRIVSET, tp);
if (error != 0)
return (EPERM);
userbits = *(int *) data;
if (userbits & TIOCFLAG_SOFTCAR)
driverbits |= SCN_SW_SOFTCAR;
if (userbits & TIOCFLAG_CLOCAL)
driverbits |= SCN_SW_CLOCAL;
if (userbits & TIOCFLAG_CRTSCTS)
driverbits |= SCN_SW_CRTSCTS;
if (userbits & TIOCFLAG_MDMBUF)
driverbits |= SCN_SW_MDMBUF;
sc->sc_swflags = driverbits;
break;
}
default:
return (EPASSTHROUGH);
}
return (0);
}
int
scnparam(struct tty *tp, struct termios *t)
{
int cflag = t->c_cflag;
int unit = DEV_UNIT(tp->t_dev);
char mr1, mr2;
int error;
struct scn_softc *sc = SOFTC(unit);
/* Is this a hang up? */
if (t->c_ospeed == B0) {
SCN_OP_BIC(sc, sc->sc_op_dtr);
/* leave DTR down. see comment in scnclose() -plb */
return (0);
}
mr1 = mr2 = 0;
/* Parity? */
if (cflag & PARENB) {
if ((cflag & PARODD) == 0)
mr1 |= MR1_PEVEN;
else
mr1 |= MR1_PODD;
} else
mr1 |= MR1_PNONE;
/* Stop bits. */
if (cflag & CSTOPB)
mr2 |= MR2_STOP2;
else
mr2 |= MR2_STOP1;
/* Data bits. */
switch (cflag & CSIZE) {
case CS5:
mr1 |= MR1_CS5;
break;
case CS6:
mr1 |= MR1_CS6;
break;
case CS7:
mr1 |= MR1_CS7;
break;
case CS8:
default:
mr1 |= MR1_CS8;
break;
}
if (cflag & CCTS_OFLOW)
mr2 |= MR2_TXCTS;
if (cflag & CRTS_IFLOW) {
mr1 |= MR1_RXRTS;
sc->sc_rbhiwat = SCN_RING_HIWAT;
} else {
sc->sc_rbhiwat = 0;
}
error = scn_config(unit, sc->sc_channel, t->c_ispeed,
t->c_ospeed, mr1, mr2);
/* If successful, copy to tty */
if (!error) {
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = cflag;
}
return (error);
}
/*
* Start or restart a transmission.
*/
void
scnstart(struct tty *tp)
{
int s, c;
int unit = DEV_UNIT(tp->t_dev);
struct scn_softc *sc = SOFTC(unit);
s = spltty();
if (tp->t_state & (TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
goto out;
if (!ttypull(tp))
goto out;
tp->t_state |= TS_BUSY;
while (sc->sc_chbase[CH_SR] & SR_TX_RDY) {
if ((c = getc(&tp->t_outq)) == -1)
break;
sc->sc_chbase[CH_DAT] = c;
}
sc->sc_duart->imr |= (sc->sc_tx_int | sc->sc_rx_int);
sc->sc_duart->base[DU_IMR] = sc->sc_duart->imr;
out:
splx(s);
}
/*
* Stop output on a line.
*/
/*ARGSUSED*/
void
scnstop(struct tty *tp, int flags)
{
int s;
s = spltty();
if (tp->t_state & TS_BUSY) {
if ((tp->t_state & TS_TTSTOP) == 0)
tp->t_state |= TS_FLUSH;
}
splx(s);
}
/*
* Following are all routines needed for SCN to act as console.
*/
void
scncnprobe(struct consdev *cn)
{
}
void
scncnreinit(void *v)
{
volatile u_char *du_base =
(volatile u_char *)MIPS_PHYS_TO_KSEG1(0x1fb80004);
du_base[DU_OPSET] =
SCN_CONSCHAN ? (OP_RTSB | OP_DTRB) : (OP_RTSA | OP_DTRA);
}
void
scncninit(struct consdev *cn)
{
devmajor_t major;
/* initialize required fields */
major = cdevsw_lookup_major(&scn_cdevsw);
KASSERT(major != NODEV);
cn->cn_dev = makedev(major, SCN_CONSOLE);
cn->cn_pri = CN_REMOTE;
scninit(cn->cn_dev, scnconsrate);
}
/* Used by scncninit and kgdb startup. */
int
scninit(dev_t dev, int rate)
{
/* XXX - maintain PROM's settings */
#if 0
volatile u_char *du_base =
(volatile u_char *)MIPS_PHYS_TO_KSEG1(0x1fb80004);
int unit = DEV_UNIT(dev);
du_base[DU_OPSET] =
SCN_CONSCHAN ? (OP_RTSB | OP_DTRB) : (OP_RTSA | OP_DTRA);
scn_config(unit, SCN_CONSCHAN, rate, rate,
MR1_PNONE | MR1_CS8, MR2_STOP1);
#endif
return (0);
}
/*
* Console kernel input character routine.
*/
int
scncngetc(dev_t dev)
{
volatile u_char *ch_base =
(volatile u_char *)MIPS_PHYS_TO_KSEG1(0x1fb80004);
char c;
int s;
s = spltty();
while ((ch_base[CH_SR] & SR_RX_RDY) == 0)
;
c = ch_base[CH_DAT];
splx(s);
return c;
}
void
scncnpollc(dev_t dev, int on)
{
}
/*
* Console kernel output character routine.
*/
void
scncnputc(dev_t dev, int c)
{
volatile u_char *ch_base =
(volatile u_char *)MIPS_PHYS_TO_KSEG1(0x1fb80004);
volatile u_char *du_base =
(volatile u_char *)MIPS_PHYS_TO_KSEG1(0x1fb80004);
int s;
s = spltty();
if (c == '\n')
scncnputc(dev, '\r');
while ((ch_base[CH_SR] & SR_TX_RDY) == 0)
;
ch_base[CH_DAT] = c;
while ((ch_base[CH_SR] & SR_TX_RDY) == 0)
;
du_base[DU_ISR];
splx(s);
}