/* $NetBSD: start.S,v 1.6 2017/05/22 17:00:55 ragge Exp $ */
/*
* Copyright (c) 1995 Ludd, University of Lule}, Sweden.
* All rights reserved.
*
* This code is derived from software contributed to Ludd by
* Bertram Barth.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* All bugs are subject to removal without further notice */
#define _LOCORE
#define __HAVE_OLD_DISKLABEL /* not automatically added due to _LOCORE */
#define OMIT_DKTYPENUMS
#define OMIT_FSTYPENUMS
#include "sys/disklabel.h"
#include "../include/mtpr.h"
#include "../include/asm.h"
_C_LABEL(_start):
_C_LABEL(start):
.globl _C_LABEL(start) # this is the symbolic name for the start
.globl _C_LABEL(_start) # of code to be relocated. We can use this
# to get the actual/real address (pc-rel)
# or to get the relocated address (abs).
.org 0x00 # uVAX booted from TK50 starts here
brb from_0x00 # continue behind dispatch-block
# At offset 0x02 we have a dual used area: VMB.EXE starts execution here,
# and uVAX-ROM looks for a pointer to a parameter block. We arrange for
# the parameter block offset to disassmble as a CASEL instructions which
# falls through to 0x08.
.org 0x02 # information used by uVAX-ROM
.byte 0xcf # offset in words to identification area
.byte 1 # this byte must be 1
.word 0 # logical block number (word swapped)
.word 0 # of the secondary image
.org 0x08 #
brb from_0x08 # skip ...
.org 0x0C # 11/750 & 8200 starts here
movzbl $1,_C_LABEL(from)# We booted from "old" rom.
brw cont_750
from_0x00: # uVAX from TK50
brw start_uvax # all uVAXen continue there
from_0x08: # Any machine from VMB
movzbl $4,_C_LABEL(from) # Booted from full VMB
/*
* Read in block 1-15.
*/
movl 52(%r11), %r7 # load iovec/bqo into %r7
addl3 (%r7), %r7, %r6 # load qio into %r6
pushl %r11 # base of rpb
pushl $0 # virtual-flag
pushl $33 # read-logical-block
pushl $1 # lbn to start reading
pushl $7680 # number of bytes to read
pushab start_uvax # buffer-address
calls $6, (%r6) # call the qio-routine
brw start_uvax
# the complete area reserved for label
# must be empty (i.e. filled with zeroes).
# disklabel(8) checks that before installing
# the bootblocks over existing label.
.org LABELOFFSET
.globl _C_LABEL(romlabel)
_C_LABEL(romlabel):
.long 0
.org LABELOFFSET + d_end_
# Make sure the parameter block is past the disklabel.
# If not, the next .org would try to move backwards.
/*
* Parameter block for uVAX boot.
*/
#define VOLINFO 0 /* 1=single-sided 81=double-sided volumes */
#define SISIZE 16 /* size in blocks of secondary image */
#define SILOAD 0 /* load offset (usually 0) from the default */
#define SIOFF 0x200 /* byte offset into secondary image */
.org 0x19e # do not move, see comment earlier about CASEL
.byte 0x18 # must be 0x18
.byte 0x00 # must be 0x00 (MBZ)
.byte 0x00 # any value
.byte 0xFF - (0x18 + 0x00 + 0x00)
/* 4th byte holds 1s' complement of sum of previous 3 bytes */
.byte 0x00 # must be 0x00 (MBZ)
.byte VOLINFO
.byte 0x00 # any value
.byte 0x00 # any value
.long SISIZE # size in blocks of secondary image
.long SILOAD # load offset (usually 0)
.long SIOFF # byte offset into secondary image
.long (SISIZE + SILOAD + SIOFF) # sum of previous 3
.align 2
.globl _C_LABEL(from)
_C_LABEL(from):
.long 0
/*
* After bootblock (LBN0) has been loaded into the first page
* of good memory by 11/750's ROM-code (transfer address
* of bootblock-code is: base of good memory + 0x0C) registers
* are initialized as:
* R0: type of boot-device
* 0: Massbus device
* 1: RK06/RK07
* 2: RL02
* 17: UDA50
* 35: TK50
* 64: TU58
* R1: (UBA) address of UNIBUS I/O-page
* (MBA) address of boot device's adapter
* R2: (UBA) address of the boot device's CSR
* (MBA) controller number of boot device
* R6: address of driver subroutine in ROM
*
* cont_750 reads in LBN1-15 for further execution.
*/
cont_750:
movl $_C_LABEL(start), %sp # move stack to avoid clobbering the code
pushr $0x131 # save clobbered registers
clrl %r4 # %r4 == # of blocks transferred
movab _C_LABEL(start),%r5 # %r5 have base address for next transfer
pushl %r5 # ...on stack also (Why?)
1: incl %r4 # increment block count
movl %r4,%r8 # LBN is in %r8 for rom routine
addl2 $0x200,%r5 # Increase address for next read
cmpl $16,%r4 # read 15 blocks?
beql 2f # Yep
movl %r5,(%sp) # move address to stack also
jsb (%r6) # read 512 bytes
blbs %r0,1b # jump if read succeeded
halt # otherwise die...
2: tstl (%sp)+ # remove boring arg from stack
popr $0x131 # restore clobbered registers
brw start_all # Ok, continue...
/* uVAX main entry is at the start of the second disk block. This is
* needed for multi-arch CD booting where multiple architecture need
* to shove stuff in boot block 0.
*/
.org 0x200 # uVAX booted from disk starts here
start_uvax:
movzbl $2,_C_LABEL(from) # Booted from subset-VMB
brb start_all
/*
* start_all: stack already at RELOC, we save registers, move ourself
* to RELOC and loads boot.
*/
start_all:
movl $_C_LABEL(start), %sp # move stack to a better
pushr $0x1fff # save all regs, used later.
subl3 $_C_LABEL(start), $_C_LABEL(edata), %r0
# get size of text+data (w/o bss)
moval _C_LABEL(start), %r1 # get actual base-address of code
subl3 $_C_LABEL(start), $_C_LABEL(end), %r2
# get complete size (incl. bss)
movl $_C_LABEL(start), %r3 # get relocated base-address of code
movc5 %r0, (%r1), $0, %r2, (%r3) # copy code to new location
movpsl -(%sp)
movl $relocated, -(%sp) # return-address on top of stack
rei # can be replaced with new address
relocated: # now relocation is done !!!
movl %sp, _C_LABEL(bootregs)
calls $0, _C_LABEL(Xmain) # call Xmain (gcc workaround)which is
halt # not intended to return ...
/*
* hoppabort() is called when jumping to the newly loaded program.
*/
ENTRY(hoppabort, 0)
movl 4(%ap),%r6
movl _C_LABEL(rpb),%r11
mnegl $1,%ap # Hack to figure out boot device.
movpsl -(%sp)
pushab 2(%r6)
mnegl $1,_C_LABEL(vax_load_failure)
rei
# calls $0,(%r6)
halt
ENTRY(unit_init, R6|R7|R8|R9|R10|R11)
mfpr $17,%r7 # Wanted bu KDB
movl 4(%ap),%r0 # init routine address
movl 8(%ap),%r9 # RPB in %r9
movl 12(%ap),%r1 # VMB argument list
callg (%r1),(%r0)
ret
# A bunch of functions unwanted in boot blocks.
ENTRY(getchar, 0)
halt
#ifndef USE_PRINTF
ENTRY(putchar, 0)
ret
ENTRY(printf, 0)
ret
#endif
ENTRY(panic, 0)
halt