Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/*
 * Copyright (c) 2009 Rui Paulo <rpaulo@FreeBSD.org>
 * Copyright (c) 2008 Sam Leffler, Errno Consulting
 * Copyright (c) 2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $FreeBSD: src/sys/dev/ath/ath_hal/ah_eeprom_v4k.h,v 1.2.2.3.2.1 2010/06/14 02:09:06 kensmith Exp $
 */
#ifndef _AH_EEPROM_V4K_H_
#define _AH_EEPROM_V4K_H_

#include "ah_eeprom.h"
#include "ah_eeprom_v14.h"

#define	AR9285_RDEXT_DEFAULT	0x1F

#undef owl_eep_start_loc
#ifdef __LINUX_ARM_ARCH__ /* AP71 */
#define owl_eep_start_loc		0
#else
#define owl_eep_start_loc		64
#endif

// 16-bit offset location start of calibration struct
#define AR5416_4K_EEP_START_LOC         64
#define AR5416_4K_NUM_2G_CAL_PIERS     	3
#define AR5416_4K_NUM_2G_CCK_TARGET_POWERS 3
#define AR5416_4K_NUM_2G_20_TARGET_POWERS  3
#define AR5416_4K_NUM_2G_40_TARGET_POWERS  3
#define AR5416_4K_NUM_CTLS              12
#define AR5416_4K_NUM_BAND_EDGES       	4
#define AR5416_4K_NUM_PD_GAINS         	2
#define AR5416_4K_MAX_CHAINS           	1

/*
 * NB: The format in EEPROM has words 0 and 2 swapped (i.e. version
 * and length are swapped).  We reverse their position after reading
 * the data into host memory so the version field is at the same
 * offset as in previous EEPROM layouts.  This makes utilities that
 * inspect the EEPROM contents work without looking at the PCI device
 * id which may or may not be reliable.
 */
typedef struct BaseEepHeader4k {
	uint16_t	version;	/* NB: length in EEPROM */
	uint16_t	checksum;
	uint16_t	length;		/* NB: version in EEPROM */
	uint8_t		opCapFlags;
	uint8_t		eepMisc;
	uint16_t	regDmn[2];
	uint8_t		macAddr[6];
	uint8_t		rxMask;
	uint8_t		txMask;
	uint16_t	rfSilent;
	uint16_t	blueToothOptions;
	uint16_t	deviceCap;
	uint32_t	binBuildNumber;
	uint8_t		deviceType;
	uint8_t		txGainType;	/* high power tx gain table support */
} __packed BASE_EEP4K_HEADER; // 32 B

typedef struct ModalEepHeader4k {
	uint32_t	antCtrlChain[AR5416_4K_MAX_CHAINS];	// 12
	uint32_t	antCtrlCommon;				// 4
	int8_t		antennaGainCh[AR5416_4K_MAX_CHAINS];	// 1
	uint8_t		switchSettling;				// 1
	uint8_t		txRxAttenCh[AR5416_4K_MAX_CHAINS];		// 1
	uint8_t		rxTxMarginCh[AR5416_4K_MAX_CHAINS];	// 1
	uint8_t		adcDesiredSize;				// 1
	int8_t		pgaDesiredSize;				// 1
	uint8_t		xlnaGainCh[AR5416_4K_MAX_CHAINS];		// 1
	uint8_t		txEndToXpaOff;				// 1
	uint8_t		txEndToRxOn;				// 1
	uint8_t		txFrameToXpaOn;				// 1
	uint8_t		thresh62;				// 1
	uint8_t		noiseFloorThreshCh[AR5416_4K_MAX_CHAINS];	// 1
	uint8_t		xpdGain;				// 1
	uint8_t		xpd;					// 1
	int8_t		iqCalICh[AR5416_4K_MAX_CHAINS];		// 1
	int8_t		iqCalQCh[AR5416_4K_MAX_CHAINS];		// 1
	uint8_t		pdGainOverlap;				// 1
	uint8_t		ob;					// 1
	uint8_t		db;					// 1
	uint8_t		xpaBiasLvl;				// 1
#if 0
	uint8_t		pwrDecreaseFor2Chain;			// 1
	uint8_t		pwrDecreaseFor3Chain;			// 1 -> 48 B
#endif
	uint8_t		txFrameToDataStart;			// 1
	uint8_t		txFrameToPaOn;				// 1
	uint8_t		ht40PowerIncForPdadc;			// 1
	uint8_t		bswAtten[AR5416_4K_MAX_CHAINS];		// 1
	uint8_t		bswMargin[AR5416_4K_MAX_CHAINS];	// 1
	uint8_t		swSettleHt40;				// 1	
	uint8_t		xatten2Db[AR5416_4K_MAX_CHAINS];    	// 1
	uint8_t		xatten2Margin[AR5416_4K_MAX_CHAINS];	// 1
	uint8_t		ob_ch1;				// 1 -> ob and db become chain specific from AR9280
	uint8_t		db_ch1;				// 1
	uint8_t		flagBits;			// 1
#define	AR5416_EEP_FLAG_USEANT1		0x01	/* +1 configured antenna */
#define	AR5416_EEP_FLAG_FORCEXPAON	0x02	/* force XPA bit for 5G */
#define	AR5416_EEP_FLAG_LOCALBIAS	0x04	/* enable local bias */
#define	AR5416_EEP_FLAG_FEMBANDSELECT	0x08	/* FEM band select used */
#define	AR5416_EEP_FLAG_XLNABUFIN	0x10
#define	AR5416_EEP_FLAG_XLNAISEL	0x60
#define	AR5416_EEP_FLAG_XLNAISEL_S	5
#define	AR5416_EEP_FLAG_XLNABUFMODE	0x80
	uint8_t		miscBits;			// [0..1]: bb_tx_dac_scale_cck
	uint16_t	xpaBiasLvlFreq[3];		// 6
	uint8_t		futureModal[2];			// 2

	SPUR_CHAN spurChans[AR5416_EEPROM_MODAL_SPURS];	// 20 B
} __packed MODAL_EEP4K_HEADER;				// == 68 B    

typedef struct CalCtlData4k {
	CAL_CTL_EDGES		ctlEdges[AR5416_4K_MAX_CHAINS][AR5416_4K_NUM_BAND_EDGES];
} __packed CAL_CTL_DATA_4K;

typedef struct calDataPerFreq4k {
	uint8_t		pwrPdg[AR5416_4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
	uint8_t		vpdPdg[AR5416_4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
} __packed CAL_DATA_PER_FREQ_4K;

struct ar5416eeprom_4k {
	BASE_EEP4K_HEADER	baseEepHeader;         // 32 B
	uint8_t			custData[20];          // 20 B
	MODAL_EEP4K_HEADER	modalHeader;           // 68 B
	uint8_t			calFreqPier2G[AR5416_4K_NUM_2G_CAL_PIERS];
	CAL_DATA_PER_FREQ_4K	calPierData2G[AR5416_4K_MAX_CHAINS][AR5416_4K_NUM_2G_CAL_PIERS];
	CAL_TARGET_POWER_LEG	calTargetPowerCck[AR5416_4K_NUM_2G_CCK_TARGET_POWERS];
	CAL_TARGET_POWER_LEG	calTargetPower2G[AR5416_4K_NUM_2G_20_TARGET_POWERS];
	CAL_TARGET_POWER_HT	calTargetPower2GHT20[AR5416_4K_NUM_2G_20_TARGET_POWERS];
	CAL_TARGET_POWER_HT	calTargetPower2GHT40[AR5416_4K_NUM_2G_40_TARGET_POWERS];
	uint8_t			ctlIndex[AR5416_4K_NUM_CTLS];
	CAL_CTL_DATA_4K		ctlData[AR5416_4K_NUM_CTLS];
	uint8_t			padding;			
} __packed;

typedef struct {
	struct ar5416eeprom_4k ee_base;
#define NUM_EDGES	 8
	uint16_t	ee_numCtls;
	RD_EDGES_POWER	ee_rdEdgesPower[NUM_EDGES*AR5416_4K_NUM_CTLS];
	/* XXX these are dynamically calculated for use by shared code */
	int8_t		ee_antennaGainMax;
} HAL_EEPROM_v4k;
#endif /* _AH_EEPROM_V4K_H_ */