/* $NetBSD: p5pbreg.h,v 1.7 2012/07/11 17:13:31 rkujawa Exp $ */ /*- * Copyright (c) 2011, 2012 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Radoslaw Kujawa. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Reverse engineered Phase5 PCI bridge memory map (firmware 44.71): * * 0xFFFA0000 - PCI register space, 64KB * 0xFFFC0000 - PCI configuration mechanism #1 data, 128KB * 0xFFFE0000 - (unknown, probably PCI bridge configuration registers, 4KB) * * 0xE0000000 - Permedia RAM on CVPPC/BVPPC (1st aperture), 8MB * 0xE0800000 - Permedia RAM on CVPPC/BVPPC (2nd aperture), 8MB * 0xE1000000 - Permedia registers on CVPPC/BVPPC, 128KB * * 0x80000000 - PCI cards memory space on G-REX, variable size * * Note: this map may not look the same for every firmware revision. * * The bridge is certainly capable of DMA, but this needs further reverse * engineering. */ #ifndef _AMIGA_P5PBREG_H_ #define P5BUS_PCI_CONF_BASE 0xFFFC0000 #define P5BUS_PCI_CONF_SIZE 0x00020000 /* up to 128kB */ #define OFF_PCI_CONF_DATA 0x00000000 /* also 0 on CVPPC */ #define OFF_PCI_DEVICE 0x00001000 #define OFF_PCI_FUNCTION 0x00000100 #define P5BUS_PCI_IO_BASE 0xFFFA0000 #define P5BUS_PCI_IO_SIZE 0x00010000 /* 64kB */ /* Bridge configuration */ #define P5BUS_BRIDGE_BASE 0xFFFE0000 #define P5BUS_BRIDGE_SIZE 0x00001000 /* 64kB, 4kB on some fw revs */ #define OFF_BRIDGE_ENDIAN 0x0000 /* PCI_BRIDGE_BASE + offset */ #define P5BUS_BRIDGE_ENDIAN_BIG 0x02 /* to switch into BE mode */ #define OFF_BRIDGE_INTR 0x0010 /* ? XXX interrupt enable? */ #define P5BUS_BRIDGE_INTR_INT2 0x01 /* ? XXX INT2? */ /* CVPPC/BVPPC defaults. */ #define P5BUS_PCI_MEM_BASE 0xE0000000 /* #define P5BUS_PCI_MEM_BASE 0x80000000 */ /* default on G-REX */ #define P5BUS_PCI_MEM_SIZE 0x01020000 /* typical configuration of Permedia 2 on CVPPC/BVPPC */ #define OFF_P2_APERTURE_1 0x0 #define OFF_P2_APERTURE_2 0x00800000 #define OFF_P2_REGS 0x01000000 /* #define OFF_P2_REGS 0x0F000000 */ /* ? alt. Permedia regs */ /* Permedia 2 vendor and product IDs, for CVPPC/BVPPC probe. */ #define P5PB_PM2_VENDOR_ID 0x104C #define P5PB_PM2_PRODUCT_ID 0x3D07 #endif /* _AMIGA_P5PBREG_H_ */ |