/* $NetBSD: puc.c,v 1.40 2018/11/30 16:26:59 jmcneill Exp $ */
/*
* Copyright (c) 1996, 1998, 1999
* Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI "universal" communication card device driver, glues com, lpt,
* and similar ports to PCI via bridge chip often much larger than
* the devices being glued.
*
* Author: Christopher G. Demetriou, May 14, 1998 (derived from NetBSD
* sys/dev/pci/pciide.c, revision 1.6).
*
* These devices could be (and some times are) described as
* communications/{serial,parallel}, etc. devices with known
* programming interfaces, but those programming interfaces (in
* particular the BAR assignments for devices, etc.) in fact are not
* particularly well defined.
*
* After I/we have seen more of these devices, it may be possible
* to generalize some of these bits. In particular, devices which
* describe themselves as communications/serial/16[45]50, and
* communications/parallel/??? might be attached via direct
* 'com' and 'lpt' attachments to pci.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: puc.c,v 1.40 2018/11/30 16:26:59 jmcneill Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pucvar.h>
#include <dev/pci/pcidevs.h>
#include <sys/termios.h>
#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>
#include "locators.h"
#include "com.h"
struct puc_softc {
/* static configuration data */
const struct puc_device_description *sc_desc;
/* card-global dynamic data */
void *sc_ih;
struct {
int mapped;
bus_addr_t a;
bus_size_t s;
bus_space_tag_t t;
bus_space_handle_t h;
} sc_bar_mappings[6]; /* XXX constant */
/* per-port dynamic data */
struct {
device_t dev;
/* filled in by port attachments */
int (*ihand)(void *);
void *ihandarg;
} sc_ports[PUC_MAX_PORTS];
};
static int puc_print(void *, const char *);
static const char *puc_port_type_name(int);
static int
puc_match(device_t parent, cfdata_t match, void *aux)
{
struct pci_attach_args *pa = aux;
const struct puc_device_description *desc;
pcireg_t bhlc, subsys;
bhlc = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
if (PCI_HDRTYPE_TYPE(bhlc) != 0)
return (0);
subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
desc = puc_find_description(PCI_VENDOR(pa->pa_id),
PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys));
if (desc != NULL)
return (10);
#if 0
/*
* XXX this is obviously bogus. eventually, we might want
* XXX to match communications/modem, etc., but that needs some
* XXX special work in the match fn.
*/
/*
* Match class/subclass, so we can tell people to compile kernel
* with options that cause this driver to spew.
*/
if (PCI_CLASS(pa->pa_class) == PCI_CLASS_COMMUNICATIONS) {
switch (PCI_SUBCLASS(pa->pa_class)) {
case PCI_SUBCLASS_COMMUNICATIONS_SERIAL:
case PCI_SUBCLASS_COMMUNICATIONS_MODEM:
return (1);
}
}
#endif
return (0);
}
static void
puc_attach(device_t parent, device_t self, void *aux)
{
struct puc_softc *sc = device_private(self);
struct pci_attach_args *pa = aux;
struct puc_attach_args paa;
pci_intr_handle_t intrhandle;
pcireg_t subsys;
int i, barindex;
int locs[PUCCF_NLOCS];
bool poll = false;
subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
sc->sc_desc = puc_find_description(PCI_VENDOR(pa->pa_id),
PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys));
if (sc->sc_desc == NULL) {
/*
* This was a class/subclass match, so tell people to compile
* kernel with options that cause this driver to spew.
*/
#ifdef PUC_PRINT_REGS
printf(":\n");
pci_conf_print(pa->pa_pc, pa->pa_tag, NULL);
#else
printf(": unknown PCI communications device\n");
printf("%s: compile kernel with PUC_PRINT_REGS and larger\n",
device_xname(self));
printf("%s: message buffer (via 'options MSGBUFSIZE=...'),\n",
device_xname(self));
printf("%s: and report the result with send-pr\n",
device_xname(self));
#endif
return;
}
aprint_naive("\n");
aprint_normal(": %s (", sc->sc_desc->name);
for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++)
aprint_normal("%s%s", i ? ", " : "",
puc_port_type_name(sc->sc_desc->ports[i].type));
aprint_normal(")\n");
for (i = 0; i < 6; i++) {
pcireg_t bar, type;
sc->sc_bar_mappings[i].mapped = 0;
bar = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BAR(i));
if (bar == 0) /* BAR not implemented(?) */
continue;
type = (PCI_MAPREG_TYPE(bar) == PCI_MAPREG_TYPE_IO ?
PCI_MAPREG_TYPE_IO : PCI_MAPREG_MEM_TYPE(bar));
if (type == PCI_MAPREG_TYPE_IO) {
sc->sc_bar_mappings[i].t = pa->pa_iot;
sc->sc_bar_mappings[i].a = PCI_MAPREG_IO_ADDR(bar);
sc->sc_bar_mappings[i].s = PCI_MAPREG_IO_SIZE(bar);
} else {
sc->sc_bar_mappings[i].t = pa->pa_memt;
sc->sc_bar_mappings[i].a = PCI_MAPREG_MEM_ADDR(bar);
sc->sc_bar_mappings[i].s = PCI_MAPREG_MEM_SIZE(bar);
}
sc->sc_bar_mappings[i].mapped = (pci_mapreg_map(pa,
PCI_BAR(i), type, 0,
&sc->sc_bar_mappings[i].t, &sc->sc_bar_mappings[i].h,
&sc->sc_bar_mappings[i].a, &sc->sc_bar_mappings[i].s)
== 0);
if (sc->sc_bar_mappings[i].mapped)
continue;
aprint_debug_dev(self, "couldn't map BAR at offset 0x%lx\n",
(long)(PCI_MAPREG_START + 4 * i));
}
/* Map interrupt. */
if (pci_intr_map(pa, &intrhandle)) {
poll = true;
}
/*
* XXX the sub-devices establish the interrupts, for the
* XXX following reasons:
* XXX
* XXX * we can't really know what IPLs they'd want
* XXX
* XXX * the MD dispatching code can ("should") dispatch
* XXX chained interrupts better than we can.
* XXX
* XXX It would be nice if we could indicate to the MD interrupt
* XXX handling code that the interrupt line used by the device
* XXX was a PCI (level triggered) interrupt.
* XXX
* XXX It's not pretty, but hey, what is?
*/
/* SB16C10xx board specific initialization */
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SYSTEMBASE &&
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SYSTEMBASE_SB16C1050 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SYSTEMBASE_SB16C1054 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SYSTEMBASE_SB16C1058)) {
if (!sc->sc_bar_mappings[1].mapped) {
aprint_error_dev(self,
"optional register is not mapped\n");
return;
}
#define SB16C105X_OPT_IMRREG0 0x0000000c
/* enable port 0-7 interrupt */
bus_space_write_1(sc->sc_bar_mappings[1].t,
sc->sc_bar_mappings[1].h, SB16C105X_OPT_IMRREG0, 0xff);
} else {
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self,
"couldn't establish power handler\n");
}
/* Configure each port. */
for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) {
barindex = PUC_PORT_BAR_INDEX(sc->sc_desc->ports[i].bar);
bus_space_handle_t subregion_handle;
int is_console = 0;
/* make sure the base address register is mapped */
#if NCOM > 0
is_console = com_is_console(sc->sc_bar_mappings[barindex].t,
sc->sc_bar_mappings[barindex].a +
sc->sc_desc->ports[i].offset, &subregion_handle);
if (is_console) {
sc->sc_bar_mappings[barindex].mapped = 1;
#if defined(amd64) || defined(i386)
sc->sc_bar_mappings[barindex].h = subregion_handle -
sc->sc_desc->ports[i].offset; /* XXX hack */
#endif
}
#endif
if (!sc->sc_bar_mappings[barindex].mapped) {
aprint_error_dev(self,
"%s port uses unmapped BAR (0x%x)\n",
puc_port_type_name(sc->sc_desc->ports[i].type),
sc->sc_desc->ports[i].bar);
continue;
}
/* set up to configure the child device */
paa.port = i;
paa.type = sc->sc_desc->ports[i].type;
paa.flags = sc->sc_desc->ports[i].flags;
paa.pc = pa->pa_pc;
paa.tag = pa->pa_tag;
paa.intrhandle = intrhandle;
paa.poll = poll;
paa.a = sc->sc_bar_mappings[barindex].a +
sc->sc_desc->ports[i].offset;
paa.t = sc->sc_bar_mappings[barindex].t;
paa.dmat = pa->pa_dmat;
paa.dmat64 = pa->pa_dmat64;
if (!is_console &&
bus_space_subregion(sc->sc_bar_mappings[barindex].t,
sc->sc_bar_mappings[barindex].h,
sc->sc_desc->ports[i].offset,
sc->sc_bar_mappings[barindex].s -
sc->sc_desc->ports[i].offset,
&subregion_handle) != 0) {
aprint_error_dev(self,
"couldn't get subregion for port %d\n", i);
continue;
}
paa.h = subregion_handle;
#if 0
printf("%s: port %d: %s @ (index %d) 0x%x (0x%lx, 0x%lx)\n",
device_xname(self), paa.port, puc_port_type_name(paa.type),
barindex, (int)paa.a, (long)paa.t, (long)paa.h);
#endif
locs[PUCCF_PORT] = i;
/* and configure it */
sc->sc_ports[i].dev = config_found_sm_loc(self, "puc", locs,
&paa, puc_print, config_stdsubmatch);
}
}
CFATTACH_DECL_NEW(puc, sizeof(struct puc_softc),
puc_match, puc_attach, NULL, NULL);
static int
puc_print(void *aux, const char *pnp)
{
struct puc_attach_args *paa = aux;
if (pnp)
aprint_normal("%s at %s", puc_port_type_name(paa->type), pnp);
aprint_normal(" port %d", paa->port);
return (UNCONF);
}
const struct puc_device_description *
puc_find_description(pcireg_t vend, pcireg_t prod, pcireg_t svend,
pcireg_t sprod)
{
int i;
#define checkreg(val, index) \
(((val) & puc_devices[i].rmask[(index)]) == puc_devices[i].rval[(index)])
for (i = 0; puc_devices[i].name != NULL; i++) {
if (checkreg(vend, PUC_REG_VEND) &&
checkreg(prod, PUC_REG_PROD) &&
checkreg(svend, PUC_REG_SVEND) &&
checkreg(sprod, PUC_REG_SPROD))
return (&puc_devices[i]);
}
#undef checkreg
return (NULL);
}
static const char *
puc_port_type_name(int type)
{
switch (type) {
case PUC_PORT_TYPE_COM:
return "com";
case PUC_PORT_TYPE_LPT:
return "lpt";
default:
panic("puc_port_type_name %d", type);
}
}