/******************************************************************************
*
* Module Name: asloffset - Generate a C "offset table" for BIOS use.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2019, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include "aslcompiler.h"
#include "aslcompiler.y.h"
#include "amlcode.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_COMPILER
ACPI_MODULE_NAME ("asloffset")
/* Local prototypes */
static void
LsEmitOffsetTableEntry (
UINT32 FileId,
ACPI_NAMESPACE_NODE *Node,
UINT32 NamepathOffset,
UINT32 Offset,
char *OpName,
UINT64 Value,
UINT8 AmlOpcode,
UINT16 ParentOpcode);
/*******************************************************************************
*
* FUNCTION: LsAmlOffsetWalk
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Process one node during a offset table file generation.
*
* Three types of objects are currently emitted to the offset table:
* 1) Tagged (named) resource descriptors
* 2) Named integer objects with constant integer values
* 3) Named package objects
* 4) Operation Regions that have constant Offset (address) parameters
* 5) Control methods
*
* The offset table allows the BIOS to dynamically update the values of these
* objects at boot time.
*
******************************************************************************/
ACPI_STATUS
LsAmlOffsetWalk (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
UINT32 FileId = (UINT32) ACPI_TO_INTEGER (Context);
ACPI_NAMESPACE_NODE *Node;
UINT32 Length;
UINT32 NamepathOffset;
UINT32 DataOffset;
ACPI_PARSE_OBJECT *NextOp;
/* Ignore actual data blocks for resource descriptors */
if (Op->Asl.CompileFlags & OP_IS_RESOURCE_DATA)
{
return (AE_OK); /* Do NOT update the global AML offset */
}
/* We are only interested in named objects (have a namespace node) */
Node = Op->Asl.Node;
if (!Node)
{
AslGbl_CurrentAmlOffset += Op->Asl.FinalAmlLength;
return (AE_OK);
}
/* Named resource descriptor (has a descriptor tag) */
if ((Node->Type == ACPI_TYPE_LOCAL_RESOURCE) &&
(Op->Asl.CompileFlags & OP_IS_RESOURCE_DESC))
{
LsEmitOffsetTableEntry (FileId, Node, 0, AslGbl_CurrentAmlOffset,
Op->Asl.ParseOpName, 0, Op->Asl.Extra, AML_BUFFER_OP);
AslGbl_CurrentAmlOffset += Op->Asl.FinalAmlLength;
return (AE_OK);
}
switch (Op->Asl.AmlOpcode)
{
case AML_NAME_OP:
/* Named object -- Name (NameString, DataRefObject) */
if (!Op->Asl.Child)
{
FlPrintFile (FileId, "%s NO CHILD!\n", AslGbl_MsgBuffer);
return (AE_OK);
}
Length = Op->Asl.FinalAmlLength;
/* Get to the NameSeg/NamePath Op (and length of the name) */
Op = Op->Asl.Child;
/* Get offset of last nameseg and the actual data */
NamepathOffset = AslGbl_CurrentAmlOffset + Length +
(Op->Asl.FinalAmlLength - ACPI_NAMESEG_SIZE);
DataOffset = AslGbl_CurrentAmlOffset + Length +
Op->Asl.FinalAmlLength;
/* Get actual value associated with the name */
Op = Op->Asl.Next;
switch (Op->Asl.AmlOpcode)
{
case AML_BYTE_OP:
case AML_WORD_OP:
case AML_DWORD_OP:
case AML_QWORD_OP:
/* The +1 is to handle the integer size prefix (opcode) */
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, (DataOffset + 1),
Op->Asl.ParseOpName, Op->Asl.Value.Integer,
(UINT8) Op->Asl.AmlOpcode, AML_NAME_OP);
break;
case AML_ONE_OP:
case AML_ONES_OP:
case AML_ZERO_OP:
/* For these, offset will point to the opcode */
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, DataOffset,
Op->Asl.ParseOpName, Op->Asl.Value.Integer,
(UINT8) Op->Asl.AmlOpcode, AML_NAME_OP);
break;
case AML_PACKAGE_OP:
case AML_VARIABLE_PACKAGE_OP:
/* Get the package element count */
NextOp = Op->Asl.Child;
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, DataOffset,
Op->Asl.ParseOpName, NextOp->Asl.Value.Integer,
(UINT8) Op->Asl.AmlOpcode, AML_NAME_OP);
break;
default:
break;
}
AslGbl_CurrentAmlOffset += Length;
return (AE_OK);
case AML_REGION_OP:
/* OperationRegion (NameString, RegionSpace, RegionOffset, RegionLength) */
Length = Op->Asl.FinalAmlLength;
/* Get the name/namepath node */
NextOp = Op->Asl.Child;
/* Get offset of last nameseg and the actual data */
NamepathOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength - ACPI_NAMESEG_SIZE);
DataOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength + 1);
/* Get the SpaceId node, then the Offset (address) node */
NextOp = NextOp->Asl.Next;
NextOp = NextOp->Asl.Next;
switch (NextOp->Asl.AmlOpcode)
{
/*
* We are only interested in integer constants that can be changed
* at boot time. Note, the One/Ones/Zero opcodes are considered
* non-changeable, so we ignore them here.
*/
case AML_BYTE_OP:
case AML_WORD_OP:
case AML_DWORD_OP:
case AML_QWORD_OP:
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, (DataOffset + 1),
Op->Asl.ParseOpName, NextOp->Asl.Value.Integer,
(UINT8) NextOp->Asl.AmlOpcode, AML_REGION_OP);
AslGbl_CurrentAmlOffset += Length;
return (AE_OK);
default:
break;
}
break;
case AML_METHOD_OP:
/* Method (Namepath, ...) */
Length = Op->Asl.FinalAmlLength;
/* Get the NameSeg/NamePath Op */
NextOp = Op->Asl.Child;
/* Get offset of last nameseg and the actual data (flags byte) */
NamepathOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength - ACPI_NAMESEG_SIZE);
DataOffset = AslGbl_CurrentAmlOffset + Length +
NextOp->Asl.FinalAmlLength;
/* Get the flags byte Op */
NextOp = NextOp->Asl.Next;
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, DataOffset,
Op->Asl.ParseOpName, NextOp->Asl.Value.Integer,
(UINT8) Op->Asl.AmlOpcode, AML_METHOD_OP);
break;
case AML_PROCESSOR_OP:
/* Processor (Namepath, ProcessorId, Address, Length) */
Length = Op->Asl.FinalAmlLength;
NextOp = Op->Asl.Child; /* Get Namepath */
/* Get offset of last nameseg and the actual data (PBlock address) */
NamepathOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength - ACPI_NAMESEG_SIZE);
DataOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength + 1);
NextOp = NextOp->Asl.Next; /* Get ProcessorID (BYTE) */
NextOp = NextOp->Asl.Next; /* Get Address (DWORD) */
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, DataOffset,
Op->Asl.ParseOpName, NextOp->Asl.Value.Integer,
(UINT8) AML_DWORD_OP, AML_PROCESSOR_OP);
break;
case AML_DEVICE_OP:
case AML_SCOPE_OP:
case AML_THERMAL_ZONE_OP:
/* Device/Scope/ThermalZone (Namepath) */
Length = Op->Asl.FinalAmlLength;
NextOp = Op->Asl.Child; /* Get Namepath */
/* Get offset of last nameseg */
NamepathOffset = AslGbl_CurrentAmlOffset + Length +
(NextOp->Asl.FinalAmlLength - ACPI_NAMESEG_SIZE);
LsEmitOffsetTableEntry (FileId, Node, NamepathOffset, 0,
Op->Asl.ParseOpName, 0, (UINT8) 0, Op->Asl.AmlOpcode);
break;
default:
break;
}
AslGbl_CurrentAmlOffset += Op->Asl.FinalAmlLength;
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: LsEmitOffsetTableEntry
*
* PARAMETERS: FileId - ID of current listing file
* Node - Namespace node associated with the name
* Offset - Offset of the value within the AML table
* OpName - Name of the AML opcode
* Value - Current value of the AML field
* AmlOpcode - Opcode associated with the field
* ObjectType - ACPI object type
*
* RETURN: None
*
* DESCRIPTION: Emit a line of the offset table (-so option)
*
******************************************************************************/
static void
LsEmitOffsetTableEntry (
UINT32 FileId,
ACPI_NAMESPACE_NODE *Node,
UINT32 NamepathOffset,
UINT32 Offset,
char *OpName,
UINT64 Value,
UINT8 AmlOpcode,
UINT16 ParentOpcode)
{
ACPI_BUFFER TargetPath;
ACPI_STATUS Status;
/* Get the full pathname to the namespace node */
TargetPath.Length = ACPI_ALLOCATE_LOCAL_BUFFER;
Status = AcpiNsHandleToPathname (Node, &TargetPath, FALSE);
if (ACPI_FAILURE (Status))
{
return;
}
/* [1] - Skip the opening backslash for the path */
strcpy (AslGbl_MsgBuffer, "\"");
strcat (AslGbl_MsgBuffer, &((char *) TargetPath.Pointer)[1]);
strcat (AslGbl_MsgBuffer, "\",");
ACPI_FREE (TargetPath.Pointer);
/*
* Max offset is 4G, constrained by 32-bit ACPI table length.
* Max Length for Integers is 8 bytes.
*/
FlPrintFile (FileId,
" {%-29s 0x%4.4X, 0x%8.8X, 0x%2.2X, 0x%8.8X, 0x%8.8X%8.8X}, /* %s */\n",
AslGbl_MsgBuffer, ParentOpcode, NamepathOffset, AmlOpcode,
Offset, ACPI_FORMAT_UINT64 (Value), OpName);
}
/*******************************************************************************
*
* FUNCTION: LsDoOffsetTableHeader, LsDoOffsetTableFooter
*
* PARAMETERS: FileId - ID of current listing file
*
* RETURN: None
*
* DESCRIPTION: Header and footer for the offset table file.
*
******************************************************************************/
void
LsDoOffsetTableHeader (
UINT32 FileId)
{
FlPrintFile (FileId,
"#ifndef __AML_OFFSET_TABLE_H\n"
"#define __AML_OFFSET_TABLE_H\n\n");
FlPrintFile (FileId, "typedef struct {\n"
" char *Pathname; /* Full pathname (from root) to the object */\n"
" unsigned short ParentOpcode; /* AML opcode for the parent object */\n"
" unsigned long NamesegOffset; /* Offset of last nameseg in the parent namepath */\n"
" unsigned char Opcode; /* AML opcode for the data */\n"
" unsigned long Offset; /* Offset for the data */\n"
" unsigned long long Value; /* Original value of the data (as applicable) */\n"
"} AML_OFFSET_TABLE_ENTRY;\n\n");
FlPrintFile (FileId,
"#endif /* __AML_OFFSET_TABLE_H */\n\n");
FlPrintFile (FileId,
"/*\n"
" * Information specific to the supported object types:\n"
" *\n"
" * Integers:\n"
" * Opcode is the integer prefix, indicates length of the data\n"
" * (One of: BYTE, WORD, DWORD, QWORD, ZERO, ONE, ONES)\n"
" * Offset points to the actual integer data\n"
" * Value is the existing value in the AML\n"
" *\n"
" * Packages:\n"
" * Opcode is the package or var_package opcode\n"
" * Offset points to the package opcode\n"
" * Value is the package element count\n"
" *\n"
" * Operation Regions:\n"
" * Opcode is the address integer prefix, indicates length of the data\n"
" * Offset points to the region address\n"
" * Value is the existing address value in the AML\n"
" *\n"
" * Control Methods:\n"
" * Offset points to the method flags byte\n"
" * Value is the existing flags value in the AML\n"
" *\n"
" * Processors:\n"
" * Offset points to the first byte of the PBlock Address\n"
" *\n"
" * Resource Descriptors:\n"
" * Opcode is the descriptor type\n"
" * Offset points to the start of the descriptor\n"
" *\n"
" * Scopes/Devices/ThermalZones:\n"
" * Nameseg offset only\n"
" */\n");
FlPrintFile (FileId,
"AML_OFFSET_TABLE_ENTRY %s_%s_OffsetTable[] =\n{\n",
AslGbl_TableSignature, AslGbl_TableId);
}
void
LsDoOffsetTableFooter (
UINT32 FileId)
{
FlPrintFile (FileId,
" {NULL,0,0,0,0,0} /* Table terminator */\n};\n\n");
AslGbl_CurrentAmlOffset = 0;
}