/******************************************************************************
*
* Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2019, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include "acpi.h"
#include "accommon.h"
#include "acinterp.h"
#include "amlcode.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exmisc")
/*******************************************************************************
*
* FUNCTION: AcpiExGetObjectReference
*
* PARAMETERS: ObjDesc - Create a reference to this object
* ReturnDesc - Where to store the reference
* WalkState - Current state
*
* RETURN: Status
*
* DESCRIPTION: Obtain and return a "reference" to the target object
* Common code for the RefOfOp and the CondRefOfOp.
*
******************************************************************************/
ACPI_STATUS
AcpiExGetObjectReference (
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT **ReturnDesc,
ACPI_WALK_STATE *WalkState)
{
ACPI_OPERAND_OBJECT *ReferenceObj;
ACPI_OPERAND_OBJECT *ReferencedObj;
ACPI_FUNCTION_TRACE_PTR (ExGetObjectReference, ObjDesc);
*ReturnDesc = NULL;
switch (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc))
{
case ACPI_DESC_TYPE_OPERAND:
if (ObjDesc->Common.Type != ACPI_TYPE_LOCAL_REFERENCE)
{
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
/*
* Must be a reference to a Local or Arg
*/
switch (ObjDesc->Reference.Class)
{
case ACPI_REFCLASS_LOCAL:
case ACPI_REFCLASS_ARG:
case ACPI_REFCLASS_DEBUG:
/* The referenced object is the pseudo-node for the local/arg */
ReferencedObj = ObjDesc->Reference.Object;
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid Reference Class 0x%2.2X",
ObjDesc->Reference.Class));
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
break;
case ACPI_DESC_TYPE_NAMED:
/*
* A named reference that has already been resolved to a Node
*/
ReferencedObj = ObjDesc;
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid descriptor type 0x%X",
ACPI_GET_DESCRIPTOR_TYPE (ObjDesc)));
return_ACPI_STATUS (AE_TYPE);
}
/* Create a new reference object */
ReferenceObj = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_REFERENCE);
if (!ReferenceObj)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
ReferenceObj->Reference.Class = ACPI_REFCLASS_REFOF;
ReferenceObj->Reference.Object = ReferencedObj;
*ReturnDesc = ReferenceObj;
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Object %p Type [%s], returning Reference %p\n",
ObjDesc, AcpiUtGetObjectTypeName (ObjDesc), *ReturnDesc));
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiExDoMathOp
*
* PARAMETERS: Opcode - AML opcode
* Integer0 - Integer operand #0
* Integer1 - Integer operand #1
*
* RETURN: Integer result of the operation
*
* DESCRIPTION: Execute a math AML opcode. The purpose of having all of the
* math functions here is to prevent a lot of pointer dereferencing
* to obtain the operands.
*
******************************************************************************/
UINT64
AcpiExDoMathOp (
UINT16 Opcode,
UINT64 Integer0,
UINT64 Integer1)
{
ACPI_FUNCTION_ENTRY ();
switch (Opcode)
{
case AML_ADD_OP: /* Add (Integer0, Integer1, Result) */
return (Integer0 + Integer1);
case AML_BIT_AND_OP: /* And (Integer0, Integer1, Result) */
return (Integer0 & Integer1);
case AML_BIT_NAND_OP: /* NAnd (Integer0, Integer1, Result) */
return (~(Integer0 & Integer1));
case AML_BIT_OR_OP: /* Or (Integer0, Integer1, Result) */
return (Integer0 | Integer1);
case AML_BIT_NOR_OP: /* NOr (Integer0, Integer1, Result) */
return (~(Integer0 | Integer1));
case AML_BIT_XOR_OP: /* XOr (Integer0, Integer1, Result) */
return (Integer0 ^ Integer1);
case AML_MULTIPLY_OP: /* Multiply (Integer0, Integer1, Result) */
return (Integer0 * Integer1);
case AML_SHIFT_LEFT_OP: /* ShiftLeft (Operand, ShiftCount, Result)*/
/*
* We need to check if the shiftcount is larger than the integer bit
* width since the behavior of this is not well-defined in the C language.
*/
if (Integer1 >= AcpiGbl_IntegerBitWidth)
{
return (0);
}
return (Integer0 << Integer1);
case AML_SHIFT_RIGHT_OP: /* ShiftRight (Operand, ShiftCount, Result) */
/*
* We need to check if the shiftcount is larger than the integer bit
* width since the behavior of this is not well-defined in the C language.
*/
if (Integer1 >= AcpiGbl_IntegerBitWidth)
{
return (0);
}
return (Integer0 >> Integer1);
case AML_SUBTRACT_OP: /* Subtract (Integer0, Integer1, Result) */
return (Integer0 - Integer1);
default:
return (0);
}
}
/*******************************************************************************
*
* FUNCTION: AcpiExDoLogicalNumericOp
*
* PARAMETERS: Opcode - AML opcode
* Integer0 - Integer operand #0
* Integer1 - Integer operand #1
* LogicalResult - TRUE/FALSE result of the operation
*
* RETURN: Status
*
* DESCRIPTION: Execute a logical "Numeric" AML opcode. For these Numeric
* operators (LAnd and LOr), both operands must be integers.
*
* Note: cleanest machine code seems to be produced by the code
* below, rather than using statements of the form:
* Result = (Integer0 && Integer1);
*
******************************************************************************/
ACPI_STATUS
AcpiExDoLogicalNumericOp (
UINT16 Opcode,
UINT64 Integer0,
UINT64 Integer1,
BOOLEAN *LogicalResult)
{
ACPI_STATUS Status = AE_OK;
BOOLEAN LocalResult = FALSE;
ACPI_FUNCTION_TRACE (ExDoLogicalNumericOp);
switch (Opcode)
{
case AML_LOGICAL_AND_OP: /* LAnd (Integer0, Integer1) */
if (Integer0 && Integer1)
{
LocalResult = TRUE;
}
break;
case AML_LOGICAL_OR_OP: /* LOr (Integer0, Integer1) */
if (Integer0 || Integer1)
{
LocalResult = TRUE;
}
break;
default:
ACPI_ERROR ((AE_INFO,
"Invalid numeric logical opcode: %X", Opcode));
Status = AE_AML_INTERNAL;
break;
}
/* Return the logical result and status */
*LogicalResult = LocalResult;
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExDoLogicalOp
*
* PARAMETERS: Opcode - AML opcode
* Operand0 - operand #0
* Operand1 - operand #1
* LogicalResult - TRUE/FALSE result of the operation
*
* RETURN: Status
*
* DESCRIPTION: Execute a logical AML opcode. The purpose of having all of the
* functions here is to prevent a lot of pointer dereferencing
* to obtain the operands and to simplify the generation of the
* logical value. For the Numeric operators (LAnd and LOr), both
* operands must be integers. For the other logical operators,
* operands can be any combination of Integer/String/Buffer. The
* first operand determines the type to which the second operand
* will be converted.
*
* Note: cleanest machine code seems to be produced by the code
* below, rather than using statements of the form:
* Result = (Operand0 == Operand1);
*
******************************************************************************/
ACPI_STATUS
AcpiExDoLogicalOp (
UINT16 Opcode,
ACPI_OPERAND_OBJECT *Operand0,
ACPI_OPERAND_OBJECT *Operand1,
BOOLEAN *LogicalResult)
{
ACPI_OPERAND_OBJECT *LocalOperand1 = Operand1;
UINT64 Integer0;
UINT64 Integer1;
UINT32 Length0;
UINT32 Length1;
ACPI_STATUS Status = AE_OK;
BOOLEAN LocalResult = FALSE;
int Compare;
ACPI_FUNCTION_TRACE (ExDoLogicalOp);
/*
* Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI 3.0+ specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
* resolution mechanism.
*/
switch (Operand0->Common.Type)
{
case ACPI_TYPE_INTEGER:
Status = AcpiExConvertToInteger (Operand1, &LocalOperand1,
ACPI_IMPLICIT_CONVERSION);
break;
case ACPI_TYPE_STRING:
Status = AcpiExConvertToString (
Operand1, &LocalOperand1, ACPI_IMPLICIT_CONVERT_HEX);
break;
case ACPI_TYPE_BUFFER:
Status = AcpiExConvertToBuffer (Operand1, &LocalOperand1);
break;
default:
ACPI_ERROR ((AE_INFO,
"Invalid object type for logical operator: %X",
Operand0->Common.Type));
Status = AE_AML_INTERNAL;
break;
}
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/*
* Two cases: 1) Both Integers, 2) Both Strings or Buffers
*/
if (Operand0->Common.Type == ACPI_TYPE_INTEGER)
{
/*
* 1) Both operands are of type integer
* Note: LocalOperand1 may have changed above
*/
Integer0 = Operand0->Integer.Value;
Integer1 = LocalOperand1->Integer.Value;
switch (Opcode)
{
case AML_LOGICAL_EQUAL_OP: /* LEqual (Operand0, Operand1) */
if (Integer0 == Integer1)
{
LocalResult = TRUE;
}
break;
case AML_LOGICAL_GREATER_OP: /* LGreater (Operand0, Operand1) */
if (Integer0 > Integer1)
{
LocalResult = TRUE;
}
break;
case AML_LOGICAL_LESS_OP: /* LLess (Operand0, Operand1) */
if (Integer0 < Integer1)
{
LocalResult = TRUE;
}
break;
default:
ACPI_ERROR ((AE_INFO,
"Invalid comparison opcode: %X", Opcode));
Status = AE_AML_INTERNAL;
break;
}
}
else
{
/*
* 2) Both operands are Strings or both are Buffers
* Note: Code below takes advantage of common Buffer/String
* object fields. LocalOperand1 may have changed above. Use
* memcmp to handle nulls in buffers.
*/
Length0 = Operand0->Buffer.Length;
Length1 = LocalOperand1->Buffer.Length;
/* Lexicographic compare: compare the data bytes */
Compare = memcmp (Operand0->Buffer.Pointer,
LocalOperand1->Buffer.Pointer,
(Length0 > Length1) ? Length1 : Length0);
switch (Opcode)
{
case AML_LOGICAL_EQUAL_OP: /* LEqual (Operand0, Operand1) */
/* Length and all bytes must be equal */
if ((Length0 == Length1) &&
(Compare == 0))
{
/* Length and all bytes match ==> TRUE */
LocalResult = TRUE;
}
break;
case AML_LOGICAL_GREATER_OP: /* LGreater (Operand0, Operand1) */
if (Compare > 0)
{
LocalResult = TRUE;
goto Cleanup; /* TRUE */
}
if (Compare < 0)
{
goto Cleanup; /* FALSE */
}
/* Bytes match (to shortest length), compare lengths */
if (Length0 > Length1)
{
LocalResult = TRUE;
}
break;
case AML_LOGICAL_LESS_OP: /* LLess (Operand0, Operand1) */
if (Compare > 0)
{
goto Cleanup; /* FALSE */
}
if (Compare < 0)
{
LocalResult = TRUE;
goto Cleanup; /* TRUE */
}
/* Bytes match (to shortest length), compare lengths */
if (Length0 < Length1)
{
LocalResult = TRUE;
}
break;
default:
ACPI_ERROR ((AE_INFO,
"Invalid comparison opcode: %X", Opcode));
Status = AE_AML_INTERNAL;
break;
}
}
Cleanup:
/* New object was created if implicit conversion performed - delete */
if (LocalOperand1 != Operand1)
{
AcpiUtRemoveReference (LocalOperand1);
}
/* Return the logical result and status */
*LogicalResult = LocalResult;
return_ACPI_STATUS (Status);
}