/*
* Device Tree Source for Qualcomm MDM9615 SoC
*
* Copyright (C) 2016 BayLibre, SAS.
* Author : Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Qualcomm MDM9615";
compatible = "qcom,mdm9615";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
next-level-cache = <&L2>;
};
};
cpu-pmu {
compatible = "arm,cortex-a5-pmu";
interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
};
regulators {
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
regulator-always-on;
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
L2: l2-cache@2040000 {
compatible = "arm,pl310-cache";
reg = <0x02040000 0x1000>;
arm,data-latency = <2 2 0>;
cache-unified;
cache-level = <2>;
};
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
};
timer@200a000 {
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
msmgpio: pinctrl@800000 {
compatible = "qcom,mdm9615-pinctrl";
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-mdm9615";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
lcc: clock-controller@28000000 {
compatible = "qcom,lcc-mdm9615";
reg = <0x28000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
l2cc: clock-controller@2011000 {
compatible = "syscon";
reg = <0x02011000 0x1000>;
};
rng@1a500000 {
compatible = "qcom,prng";
reg = <0x1a500000 0x200>;
clocks = <&gcc PRNG_CLK>;
clock-names = "core";
assigned-clocks = <&gcc PRNG_CLK>;
assigned-clock-rates = <32000000>;
};
gsbi2: gsbi@16100000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
reg = <0x16100000 0x100>;
clocks = <&gcc GSBI2_H_CLK>;
clock-names = "iface";
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
gsbi2_i2c: i2c@16180000 {
compatible = "qcom,i2c-qup-v1.1.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16180000 0x1000>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
gsbi3: gsbi@16200000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <3>;
reg = <0x16200000 0x100>;
clocks = <&gcc GSBI3_H_CLK>;
clock-names = "iface";
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
gsbi3_spi: spi@16280000 {
compatible = "qcom,spi-qup-v1.1.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
gsbi4: gsbi@16300000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <4>;
reg = <0x16300000 0x100>;
clocks = <&gcc GSBI4_H_CLK>;
clock-names = "iface";
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
gsbi4_serial: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
gsbi5: gsbi@16400000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <5>;
reg = <0x16400000 0x100>;
clocks = <&gcc GSBI5_H_CLK>;
clock-names = "iface";
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
gsbi5_i2c: i2c@16480000 {
compatible = "qcom,i2c-qup-v1.1.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16480000 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
/* QUP clock is not initialized, set rate */
assigned-clocks = <&gcc GSBI5_QUP_CLK>;
assigned-clock-rates = <24000000>;
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pmicintc: pmic@0 {
compatible = "qcom,pm8018", "qcom,pm8921";
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
pwrkey@1c {
compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pmicintc>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
pmicmpp: mpp@50 {
compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
interrupt-parent = <&pmicintc>;
interrupts = <24 IRQ_TYPE_NONE>,
<25 IRQ_TYPE_NONE>,
<26 IRQ_TYPE_NONE>,
<27 IRQ_TYPE_NONE>,
<28 IRQ_TYPE_NONE>,
<29 IRQ_TYPE_NONE>;
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
};
rtc@11d {
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
interrupt-parent = <&pmicintc>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
pmicgpio: gpio@150 {
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
sdcc1bam: dma@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
sdcc2bam: dma@12142000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12142000 0x8000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC2_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: sdcc@12180000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC1_CLK>;
assigned-clock-rates = <400000>;
};
sdcc2: sdcc@12140000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
dma-names = "tx", "rx";
assigned-clocks = <&gcc SDC2_CLK>;
assigned-clock-rates = <400000>;
};
};
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-mdm9615", "syscon";
reg = <0x1a400000 0x100>;
};
rpm: rpm@108000 {
compatible = "qcom,rpm-mdm9615";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8018-regulators";
vin_lvs1-supply = <&pm8018_s3>;
vdd_l7-supply = <&pm8018_s4>;
vdd_l8-supply = <&pm8018_s3>;
vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
/* Buck SMPS */
pm8018_s1: s1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8018_s2: s2 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8018_s3: s3 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8018_s4: s4 {
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8018_s5: s5 {
regulator-always-on;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
/* PMOS LDO */
pm8018_l2: l2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8018_l3: l3 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8018_l4: l4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8018_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
pm8018_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
pm8018_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
pm8018_l8: l8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
pm8018_l9: l9 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
pm8018_l10: l10 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
pm8018_l11: l11 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
pm8018_l12: l12 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
pm8018_l13: l13 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8018_l14: l14 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
/* Low Voltage Switch */
pm8018_lvs1: lvs1 {
bias-pull-down;
};
};
};
};
};