Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

#
#	$NetBSD: PANDABOARD,v 1.29.2.2 2019/11/21 18:17:59 martin Exp $
#
#	PANDABOARD -- TI OMAP 4430 Eval Board Kernel
#

include	"arch/evbarm/conf/std.beagle"

# estimated number of users

maxusers	32

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
#options 	NTP		# NTP phase/frequency locked loop

# CPU options

options 	CPU_CORTEXA9
options 	OMAP_4430
options 	PMAPCOUNTERS

# Architecture options

# File systems

file-system	FFS		# UFS
#file-system	LFS		# log-structured file system
file-system	MFS		# memory file system
file-system	NFS		# Network file system
#file-system 	ADOSFS		# AmigaDOS-compatible file system
#file-system 	EXT2FS		# second extended file system (linux)
#file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS file system
#file-system	FDESC		# /dev/fd
#file-system	KERNFS		# /kern
#file-system	NULLFS		# loopback file system
#file-system	PROCFS		# /proc
#file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
#file-system	UMAPFS		# NULLFS + uid and gid remapping
#file-system	UNION		# union file system
file-system	TMPFS		# memory file system
file-system	PTYFS		# /dev/pts/N support

# File system options
#options 	QUOTA		# legacy UFS quotas
#options 	QUOTA2		# new, in-filesystem UFS quotas
#options 	DISKLABEL_EI	# disklabel Endian Independent support
#options 	FFS_EI		# FFS Endian Independent support
#options 	NFSSERVER
options 	WAPBL		# File system journaling support - Experimental
#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support

# Networking options

#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NETATALK	# AppleTalk networking
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

options 	NFS_BOOT_BOOTP
options 	NFS_BOOT_DHCP
#options		NFS_BOOT_BOOTSTATIC
#options		NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
#options		NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
#options		NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
#options		NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
#options		NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""

options 	NFS_BOOT_RWSIZE=1024

# Compatibility options

include 	"conf/compat_netbsd30.config"
options 	COMPAT_NETBSD32	# allow running arm (e.g. non-earm) binaries

# Shared memory options

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing

# Device options

#options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
#options 	MEMORY_DISK_ROOT_SIZE=8192	# Size in blocks
#options 	MEMORY_DISK_DYNAMIC
#options 	MINIROOTSIZE=1000	# Size in blocks
#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root

# Miscellaneous kernel options
options 	KTRACE		# system call tracing, a la ktrace(1)
#options 	SCSIVERBOSE	# Verbose SCSI errors
#options 	MIIVERBOSE	# Verbose MII autoconfuration messages
#options 	DDB_KEYCODE=0x40
#options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# Development and Debugging options

#options 	DIAGNOSTIC	# internal consistency checks
#options 	DEBUG
#options 	PMAP_DEBUG	# Enable pmap_debug_level code
options 	DDB		# in-kernel debugger
options 	DDB_ONPANIC=1
options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#options 	KGDB
makeoptions	DEBUG="-g"	# compile full symbol table
makeoptions	COPY_SYMTAB=1

#options 	VERBOSE_INIT_ARM # verbose bootstraping messages
#options 	EARLYCONS=beagle
#options 	CONSADDR=0x48020000, CONSPEED=38400
options 	CONSADDR=0x48020000, CONSPEED=115200

## USB Debugging options
options USB_DEBUG
options EHCI_DEBUG
options OHCI_DEBUG
options UHUB_DEBUG


# Valid options for BOOT_ARGS:
#  single		Boot to single user only
#  kdb			Give control to kernel debugger
#  ask			Ask for file name to reboot from
#  pmapdebug=<n>	If PMAP_DEBUG, set pmap_debug_level to <n>
#  memorydisk=<n>	Set memorydisk size to <n> KB
#  quiet		Show aprint_naive output
#  verbose		Show aprint_normal and aprint_verbose output
options 	BOOT_ARGS="\"\""

config		netbsd		root on ? type ?

# The main bus device
mainbus0	at root

# The boot cpu
cpu0		at mainbus?

# A9 core devices
armperiph0	at mainbus?
arml2cc0	at armperiph?				# L2 Cache Controller
armgic0		at armperiph?				# Interrupt Controller
arma9tmr0	at armperiph?				# Global Timer
arma9wdt0	at armperiph?				# Watchdog

# Specify the memory size in megabytes.
#options 	MEMSIZE=512

# L3 Interconnect
L3i0		at mainbus?

# OBIO
obio0		at mainbus? base 0x4a000000 size 0x1000000	# L4 CORE (CFG)
obio1		at mainbus? base 0x4a300000 size 0x0100000	# L4 WAKEUP
obio2		at mainbus? base 0x48000000 size 0x1000000	# L4 PERIPHERAL
obio3		at mainbus? base 0x49000000 size 0x1000000	# L4 ABE

# General Purpose Memory Controller
gpmc0		at mainbus? base 0x50000000

omapgpio0	at obio1 addr 0x4a310000 size 0x0400 intrbase 160 intr 61
omapgpio1	at obio2 addr 0x48055000 size 0x0400 intrbase 192 intr 62
omapgpio2	at obio2 addr 0x48057000 size 0x0400 intrbase 224 intr 63
omapgpio3	at obio2 addr 0x48059000 size 0x0400 intrbase 256 intr 64
omapgpio4	at obio2 addr 0x4805b000 size 0x0400 intrbase 288 intr 65
omapgpio5	at obio2 addr 0x4805d000 size 0x0400 intrbase 320 intr 66

gpio*		at omapgpio?

# # I2C Controller
# omapi2c0	at tipb? addr 0xfffb3800 intr 68 mult 4
# iic*		at omapi2c?
# # omap's own i2c address
# options 	OMAP_I2C_ADDRESS=0xe
# # i2c bus clock low and high times in ns
# options 	I2C_LOW_TIME_nSEC=1500
# options 	I2C_HIGH_TIME_nSEC=1000

# On-board 16550 UARTs
com0		at obio2 addr 0x48020000 intr 106 mult 4 # UART3 (console)

# Operating System Timer
#omapmputmr0	at obio2 addr 0x48032000 intr 70	# GP Timer 2 L4PER
# Statistics Timer
#omapmputmr1	at obio2 addr 0x48034000 intr 71	# GP Timer 3 L4PER
# Microtime Reference Timer
#omapmputmr2	at obio2 addr 0x48036000 intr 72	# GP Timer 4 L4PER
#options 	OMAP_MPU_TIMER_CLOCK_FREQ=12000000

# Watchdog timers (no WDT1)
#omapwdt32k*	at obio3 addr 0x49030000 size 2048	# WDT3
#omapwdt32k*	at obio1 addr 0x4a314000 size 2048	# WDT2

# onboard video
#omapfb*		at obio0 addr 0x48050000 size 0x10000

# make sure the console display is always wsdisplay0
#wsdisplay0	at wsemuldisplaydev? console 1
#wsdisplay*	at wsemuldisplaydev?

# various options for wscons - we try to look as much like a standard
# sun console as possible
#options 	WSEMUL_VT100		# sun terminal emulation
#options 	WS_DEFAULT_FG=WSCOL_BLACK
#options 	WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
#options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_LIGHT_WHITE
#options 	WSDISPLAY_COMPAT_USL		# VT handling
#options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
#options 	WSDISPLAY_DEFAULTSCREENS=4
#options 	FONT_QVSS8x15
#options 	FONT_GALLANT12x22	# the console font

#pseudo-device	wsmux			# mouse & keyboard multiplexor
#pseudo-device	wsfont

# Power, Reset and Clock Management
prcm*		at obio1 addr 0x4A306000 size 0x2000	# PRM Module

# MMC/SDIO
sdhc0		at obio2 addr 0x4809c000 size 0x0f00 intr 115 # 83 + 32
#sdhc1		at obio2 addr 0x480b4000 size 0x0f00 intr 118 # 85 + 32
#sdhc2		at obio2 addr 0x480ad000 size 0x0f00 intr 126 # 94 + 32
sdmmc*		at sdhc?		# SD/MMC bus
ld*		at sdmmc?
#options SDMMC_DEBUG
#options SDHC_DEBUG

# On-board USB
ohci*		at obio0 addr 0x4A064800 size 0x0400 intr 108	# 76 + 32
ehci*		at obio0 addr 0x4A064c00 size 0x0400 intr 109	# 77 + 32
usb*		at ohci?
usb*		at ehci?
uhub*		at usb?
uhub*		at uhub? port ?
umass*		at uhub? port ? configuration ? interface ?
scsibus*	at scsi?
sd*		at scsibus? target ? lun ?
#uhidev*		at uhub?
#ukbd*		at uhidev?
#ums*		at uhidev?
#wskbd*		at ukbd?
#wsmouse*	at ums?

# USB Ethernet adapters
axe*		at uhub? port ? configuration ? interface ?

# Hardware clocking and power management

#options	HWCLOCK
#options	HWCLOCK_MACHINE="<arch/arm/omap/hwclock_omap1.h>"
#options	OMAP_CK_REF_SPEED=12000000

# Pseudo-Devices

# disk/mass storage pseudo-devices
#pseudo-device	md			# memory disk device (ramdisk)
#pseudo-device	vnd			# disk-like interface to files
#pseudo-device	fss			# file system snapshot device
pseudo-device	drvctl			# driver control
#pseudo-device	putter			# for puffs and pud

# network pseudo-devices
pseudo-device	bpfilter		# Berkeley packet filter
pseudo-device	loop			# network loopback
#pseudo-device	kttcp			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
#options	RND_COM
#pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms
pseudo-device	lockstat		# lock profiling