#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig [31mCONFIG_DRM[0m
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
select HDMI
select FB_CMDLINE
select I2C
select I2C_ALGOBIT
select DMA_SHARED_BUFFER
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
the module that's right for your graphics card from the list below.
These modules provide support for synchronization, security, and
DMA transfers. Please see <http://dri.sourceforge.net/> for more
details. You should also select and configure AGP
(/dev/agpgart) support if it is available for your platform.
config [31mCONFIG_DRM_MIPI_DSI[0m
bool
depends on [31mCONFIG_DRM[0m
config [31mCONFIG_DRM_KMS_HELPER[0m
tristate
depends on [31mCONFIG_DRM[0m
help
CRTC helpers for KMS drivers.
config [31mCONFIG_DRM_KMS_FB_HELPER[0m
bool
depends on [31mCONFIG_DRM_KMS_HELPER[0m
select FB
select FRAMEBUFFER_CONSOLE if !EXPERT
select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
select FB_SYS_FOPS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
FBDEV helpers for KMS drivers.
config [31mCONFIG_DRM_FBDEV_EMULATION[0m
bool "Enable legacy fbdev support for your modesetting driver"
depends on [31mCONFIG_DRM[0m
select [31mCONFIG_DRM_KMS_HELPER[0m
select [31mCONFIG_DRM_KMS_FB_HELPER[0m
default y
help
Choose this option if you have a need for the legacy fbdev
support. Note that this support also provides the linux console
support on top of your modesetting driver.
If in doubt, say "Y".
config [31mCONFIG_DRM_LOAD_EDID_FIRMWARE[0m
bool "Allow to specify an EDID data set instead of probing for it"
depends on [31mCONFIG_DRM_KMS_HELPER[0m
help
Say Y here, if you want to use EDID data to be loaded from the
/lib/firmware directory or one of the provided built-in
data sets. This may be necessary, if the graphics adapter or
monitor are unable to provide appropriate EDID data. Since this
feature is provided as a workaround for broken hardware, the
default case is N. Details and instructions how to build your own
EDID data are given in Documentation/EDID/HOWTO.txt.
config [31mCONFIG_DRM_TTM[0m
tristate
depends on [31mCONFIG_DRM[0m
help
GPU memory management subsystem for devices with multiple
GPU memory types. Will be enabled automatically if a device driver
uses it.
config [31mCONFIG_DRM_GEM_CMA_HELPER[0m
bool
depends on [31mCONFIG_DRM[0m && HAVE_DMA_ATTRS
help
Choose this if you need the GEM CMA helper functions
config [31mCONFIG_DRM_KMS_CMA_HELPER[0m
bool
depends on [31mCONFIG_DRM[0m && HAVE_DMA_ATTRS
select [31mCONFIG_DRM_GEM_CMA_HELPER[0m
select [31mCONFIG_DRM_KMS_FB_HELPER[0m
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
help
Choose this if you need the KMS CMA helper functions
source "drivers/gpu/drm/i2c/Kconfig"
config [31mCONFIG_DRM_TDFX[0m
tristate "3dfx Banshee/Voodoo3+"
depends on [31mCONFIG_DRM[0m && PCI
help
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
graphics card. If M is selected, the module will be called tdfx.
config [31mCONFIG_DRM_R128[0m
tristate "ATI Rage 128"
depends on [31mCONFIG_DRM[0m && PCI
select FW_LOADER
help
Choose this option if you have an ATI Rage 128 graphics card. If M
is selected, the module will be called r128. AGP support for
this card is strongly suggested (unless you have a PCI version).
config [31mCONFIG_DRM_RADEON[0m
tristate "ATI Radeon"
depends on [31mCONFIG_DRM[0m && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FW_LOADER
select [31mCONFIG_DRM_KMS_HELPER[0m
select [31mCONFIG_DRM_KMS_FB_HELPER[0m
select [31mCONFIG_DRM_TTM[0m
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
select BACKLIGHT_LCD_SUPPORT
select INTERVAL_TREE
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
run the Radeon in plain VGA mode.
If M is selected, the module will be called radeon.
source "drivers/gpu/drm/radeon/Kconfig"
config [31mCONFIG_DRM_AMDGPU[0m
tristate "AMD GPU"
depends on [31mCONFIG_DRM[0m && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FW_LOADER
select [31mCONFIG_DRM_KMS_HELPER[0m
select [31mCONFIG_DRM_KMS_FB_HELPER[0m
select [31mCONFIG_DRM_TTM[0m
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
select BACKLIGHT_LCD_SUPPORT
select INTERVAL_TREE
help
Choose this option if you have a recent AMD Radeon graphics card.
If M is selected, the module will be called amdgpu.
source "drivers/gpu/drm/amd/amdgpu/Kconfig"
source "drivers/gpu/drm/nouveau/Kconfig"
config [31mCONFIG_DRM_I810[0m
tristate "Intel I810"
# !PREEMPT because of missing ioctl locking
depends on [31mCONFIG_DRM[0m && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
help
Choose this option if you have an Intel I810 graphics card. If M is
selected, the module will be called i810. AGP support is required
for this driver to work.
source "drivers/gpu/drm/i915/Kconfig"
config [31mCONFIG_DRM_MGA[0m
tristate "Matrox g200/g400"
depends on [31mCONFIG_DRM[0m && PCI
select FW_LOADER
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
support is required for this driver to work.
config [31mCONFIG_DRM_SIS[0m
tristate "SiS video cards"
depends on [31mCONFIG_DRM[0m && AGP
depends on FB_SIS || FB_SIS=n
help
Choose this option if you have a SiS 630 or compatible video
chipset. If M is selected the module will be called sis. AGP
support is required for this driver to work.
config [31mCONFIG_DRM_VIA[0m
tristate "Via unichrome video cards"
depends on [31mCONFIG_DRM[0m && PCI
help
Choose this option if you have a Via unichrome or compatible video
chipset. If M is selected the module will be called via.
config [31mCONFIG_DRM_SAVAGE[0m
tristate "Savage video cards"
depends on [31mCONFIG_DRM[0m && PCI
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.
config [31mCONFIG_DRM_VGEM[0m
tristate "Virtual GEM provider"
depends on [31mCONFIG_DRM[0m
help
Choose this option to get a virtual graphics memory manager,
as used by Mesa's software renderer for enhanced performance.
If M is selected the module will be called vgem.
source "drivers/gpu/drm/exynos/Kconfig"
source "drivers/gpu/drm/rockchip/Kconfig"
source "drivers/gpu/drm/vmwgfx/Kconfig"
source "drivers/gpu/drm/gma500/Kconfig"
source "drivers/gpu/drm/udl/Kconfig"
source "drivers/gpu/drm/ast/Kconfig"
source "drivers/gpu/drm/mgag200/Kconfig"
source "drivers/gpu/drm/cirrus/Kconfig"
source "drivers/gpu/drm/armada/Kconfig"
source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
source "drivers/gpu/drm/shmobile/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
source "drivers/gpu/drm/virtio/Kconfig"
source "drivers/gpu/drm/msm/Kconfig"
source "drivers/gpu/drm/fsl-dcu/Kconfig"
source "drivers/gpu/drm/tegra/Kconfig"
source "drivers/gpu/drm/panel/Kconfig"
source "drivers/gpu/drm/bridge/Kconfig"
source "drivers/gpu/drm/sti/Kconfig"
source "drivers/gpu/drm/amd/amdkfd/Kconfig"
source "drivers/gpu/drm/imx/Kconfig"
source "drivers/gpu/drm/vc4/Kconfig"