#! /usr/bin/env perl
# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
use POSIX;
use File::Spec::Functions qw/splitdir curdir catfile/;
use File::Compare;
use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file/;
use OpenSSL::Test::Utils;
setup("test_tsa");
plan skip_all => "TS is not supported by this OpenSSL build"
if disabled("ts");
# All these are modified inside indir further down. They need to exist
# here, however, to be available in all subroutines.
my $openssl_conf;
my $testtsa;
my $CAtsa;
my @RUN;
sub create_tsa_cert {
my $INDEX = shift;
my $EXT = shift;
my $r = 1;
$ENV{TSDNSECT} = "ts_cert_dn";
ok(run(app(["openssl", "req", "-config", $openssl_conf, "-new",
"-out", "tsa_req${INDEX}.pem",
"-keyout", "tsa_key${INDEX}.pem"])));
note "using extension $EXT";
ok(run(app(["openssl", "x509", "-req",
"-in", "tsa_req${INDEX}.pem",
"-out", "tsa_cert${INDEX}.pem",
"-CA", "tsaca.pem", "-CAkey", "tsacakey.pem",
"-CAcreateserial",
"-extfile", $openssl_conf, "-extensions", $EXT])));
}
sub create_time_stamp_response {
my $queryfile = shift;
my $outputfile = shift;
my $datafile = shift;
ok(run(app([@RUN, "-reply", "-section", "$datafile",
"-queryfile", "$queryfile", "-out", "$outputfile"])));
}
sub verify_time_stamp_response {
my $queryfile = shift;
my $inputfile = shift;
my $datafile = shift;
ok(run(app([@RUN, "-verify", "-queryfile", "$queryfile",
"-in", "$inputfile", "-CAfile", "tsaca.pem",
"-untrusted", "tsa_cert1.pem"])));
ok(run(app([@RUN, "-verify", "-data", "$datafile",
"-in", "$inputfile", "-CAfile", "tsaca.pem",
"-untrusted", "tsa_cert1.pem"])));
}
sub verify_time_stamp_response_fail {
my $queryfile = shift;
my $inputfile = shift;
ok(!run(app([@RUN, "-verify", "-queryfile", "$queryfile",
"-in", "$inputfile", "-CAfile", "tsaca.pem",
"-untrusted", "tsa_cert1.pem"])));
}
# main functions
plan tests => 20;
note "setting up TSA test directory";
indir "tsa" => sub
{
$openssl_conf = srctop_file("test", "CAtsa.cnf");
$testtsa = srctop_file("test", "recipes", "80-test_tsa.t");
$CAtsa = srctop_file("test", "CAtsa.cnf");
@RUN = ("openssl", "ts", "-config", $openssl_conf);
# ../apps/CA.pl needs these
$ENV{OPENSSL_CONFIG} = "-config $openssl_conf";
$ENV{OPENSSL} = cmdstr(app(["openssl"]), display => 1);
SKIP: {
$ENV{TSDNSECT} = "ts_ca_dn";
skip "failed", 19
unless ok(run(app(["openssl", "req", "-config", $openssl_conf,
"-new", "-x509", "-nodes",
"-out", "tsaca.pem", "-keyout", "tsacakey.pem"])),
'creating a new CA for the TSA tests');
skip "failed", 18
unless subtest 'creating tsa_cert1.pem TSA server cert' => sub {
create_tsa_cert("1", "tsa_cert")
};
skip "failed", 17
unless subtest 'creating tsa_cert2.pem non-TSA server cert' => sub {
create_tsa_cert("2", "non_tsa_cert")
};
skip "failed", 16
unless ok(run(app([@RUN, "-query", "-data", $testtsa,
"-tspolicy", "tsa_policy1", "-cert",
"-out", "req1.tsq"])),
'creating req1.req time stamp request for file testtsa');
ok(run(app([@RUN, "-query", "-in", "req1.tsq", "-text"])),
'printing req1.req');
subtest 'generating valid response for req1.req' => sub {
create_time_stamp_response("req1.tsq", "resp1.tsr", "tsa_config1")
};
ok(run(app([@RUN, "-reply", "-in", "resp1.tsr", "-text"])),
'printing response');
subtest 'verifying valid response' => sub {
verify_time_stamp_response("req1.tsq", "resp1.tsr", $testtsa)
};
skip "failed", 11
unless subtest 'verifying valid token' => sub {
ok(run(app([@RUN, "-reply", "-in", "resp1.tsr",
"-out", "resp1.tsr.token", "-token_out"])));
ok(run(app([@RUN, "-verify", "-queryfile", "req1.tsq",
"-in", "resp1.tsr.token", "-token_in",
"-CAfile", "tsaca.pem",
"-untrusted", "tsa_cert1.pem"])));
ok(run(app([@RUN, "-verify", "-data", $testtsa,
"-in", "resp1.tsr.token", "-token_in",
"-CAfile", "tsaca.pem",
"-untrusted", "tsa_cert1.pem"])));
};
skip "failed", 10
unless ok(run(app([@RUN, "-query", "-data", $testtsa,
"-tspolicy", "tsa_policy2", "-no_nonce",
"-out", "req2.tsq"])),
'creating req2.req time stamp request for file testtsa');
ok(run(app([@RUN, "-query", "-in", "req2.tsq", "-text"])),
'printing req2.req');
skip "failed", 8
unless subtest 'generating valid response for req2.req' => sub {
create_time_stamp_response("req2.tsq", "resp2.tsr", "tsa_config1")
};
skip "failed", 7
unless subtest 'checking -token_in and -token_out options with -reply' => sub {
my $RESPONSE2="resp2.tsr.copy.tsr";
my $TOKEN_DER="resp2.tsr.token.der";
ok(run(app([@RUN, "-reply", "-in", "resp2.tsr",
"-out", "$TOKEN_DER", "-token_out"])));
ok(run(app([@RUN, "-reply", "-in", "$TOKEN_DER",
"-token_in", "-out", "$RESPONSE2"])));
is(compare($RESPONSE2, "resp2.tsr"), 0);
ok(run(app([@RUN, "-reply", "-in", "resp2.tsr",
"-text", "-token_out"])));
ok(run(app([@RUN, "-reply", "-in", "$TOKEN_DER",
"-token_in", "-text", "-token_out"])));
ok(run(app([@RUN, "-reply", "-queryfile", "req2.tsq",
"-text", "-token_out"])));
};
ok(run(app([@RUN, "-reply", "-in", "resp2.tsr", "-text"])),
'printing response');
subtest 'verifying valid response' => sub {
verify_time_stamp_response("req2.tsq", "resp2.tsr", $testtsa)
};
subtest 'verifying response against wrong request, it should fail' => sub {
verify_time_stamp_response_fail("req1.tsq", "resp2.tsr")
};
subtest 'verifying response against wrong request, it should fail' => sub {
verify_time_stamp_response_fail("req2.tsq", "resp1.tsr")
};
skip "failure", 2
unless ok(run(app([@RUN, "-query", "-data", $CAtsa,
"-no_nonce", "-out", "req3.tsq"])),
"creating req3.req time stamp request for file CAtsa.cnf");
ok(run(app([@RUN, "-query", "-in", "req3.tsq", "-text"])),
'printing req3.req');
subtest 'verifying response against wrong request, it should fail' => sub {
verify_time_stamp_response_fail("req3.tsq", "resp1.tsr")
};
}
}, create => 1, cleanup => 1