.\"	$NetBSD: hardware,v 1.24 2010/04/05 14:42:38 tsutsui Exp $
.
.Nx*M
\*V runs on the TT030, Falcon, Hades and MilanI machines.
An FPU is not required.
The minimum amount of RAM required is 4 MB.
On the Hades, only the Tseng PCI
VGA cards (ET4000/ET6000/ET6100) are supported in the \*V release.
When an unsupported video card is present, you can use
.Nx
with a serial console only.
.Pp
A minimal installation requires around 100MB of disk space, plus a swap
partition size of 2*RAM (and always greater than 20MB).
You will probably want to compile your own kernel, as
.Li GENERIC
is large and bulky in order to accommodate all people,
.Li BOOT
is small and might not have all the features you want).
.
.Ss2 Supported devices
.(bullet -offset indent
The builtin SCSI host adapter
.(bullet -compact
Should support most SCSI-drives.
.It
Should support most tape drives.
.It
Should support most CD-ROM drives.
.It
Should support most ZIP/M-O drives.
.bullet)
.It
The builtin video controller
.It
The builtin (720 KB / 1.44 MB) floppy drive
.It
The serial2/modem2 ports
.It
The Falcon FX memory expansion
.It
The Atari mouse
.It
A 3-button mouse (see build description in the FAQ!)
.It
The parallel printer
.It
IDE interface on both Falcon and Hades (includes ATAPI support)
.It
The serial interface on the first 68901 UART (modem1)
.It
EtherNEC Ethernet on ROM cartridge slot
.It
VME-bus devices (TT030/Hades)
.(bullet -compact
BVME410 Ethernet
.It
Circad Leonardo 24-bit VME graphics adapter
.It
Crazy Dots VME et4000 graphics adapter
.It
Riebl (and possibly PAM) Ethernet cards on the VME bus.
.It
SMC Elite Ultra ISA Ethernet with SMC_TT VME-ISA bridge
.bullet)
.It
PCI-bus devices (Hades and Milan only)
.(bullet -compact
ET4000/ET6000/ET6100-PCI (VGA console)
.It
ESS Technology Inc. Solo-1 Soundcard
.It
3Com 3c59x Network card
.bullet)
.It
ISA-bus devices (Hades only)
.(bullet -compact
Teles S0/16.3-ISA ISDN adapter (with I4B)
.bullet)
.bullet)
.Pp
This list is incomplete by definition.
We can not test all SCSI peripherals, ISA cards or PCI cards.
If you have problems with such peripherals, please contact the
.Mt port-\*M@NetBSD.org
mailing list.