divert(-1)
dnl m4 macros for x86 assembler.
dnl Copyright 1999-2003, 2007, 2010, 2012, 2014 Free Software Foundation, Inc.
dnl This file is part of the GNU MP Library.
dnl
dnl The GNU MP Library is free software; you can redistribute it and/or modify
dnl it under the terms of either:
dnl
dnl * the GNU Lesser General Public License as published by the Free
dnl Software Foundation; either version 3 of the License, or (at your
dnl option) any later version.
dnl
dnl or
dnl
dnl * the GNU General Public License as published by the Free Software
dnl Foundation; either version 2 of the License, or (at your option) any
dnl later version.
dnl
dnl or both in parallel, as here.
dnl
dnl The GNU MP Library is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
dnl or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
dnl for more details.
dnl
dnl You should have received copies of the GNU General Public License and the
dnl GNU Lesser General Public License along with the GNU MP Library. If not,
dnl see https://www.gnu.org/licenses/.
dnl Notes:
dnl
dnl m4 isn't perfect for processing BSD style x86 assembler code, the main
dnl problems are,
dnl
dnl 1. Doing define(foo,123) and then using foo in an addressing mode like
dnl foo(%ebx) expands as a macro rather than a constant. This is worked
dnl around by using deflit() from asm-defs.m4, instead of define().
dnl
dnl 2. Immediates in macro definitions need a space or `' to stop the $
dnl looking like a macro parameter. For example,
dnl
dnl define(foo, `mov $ 123, %eax')
dnl
dnl This is only a problem in macro definitions, not in ordinary text,
dnl and not in macro parameters like text passed to forloop() or ifdef().
deflit(GMP_LIMB_BYTES, 4)
dnl Libtool gives -DPIC -DDLL_EXPORT to indicate a cygwin or mingw DLL. We
dnl undefine PIC since we don't need to be position independent in this
dnl case and definitely don't want the ELF style _GLOBAL_OFFSET_TABLE_ etc.
ifdef(`DLL_EXPORT',`undefine(`PIC')')
dnl Usage: CPUVEC_FUNCS_LIST
dnl
dnl A list of the functions from gmp-impl.h x86 struct cpuvec_t, in the
dnl order they appear in that structure.
define(CPUVEC_FUNCS_LIST,
``add_n',
`addlsh1_n',
`addlsh2_n',
`addmul_1',
`addmul_2',
`bdiv_dbm1c',
`cnd_add_n',
`cnd_sub_n',
`com',
`copyd',
`copyi',
`divexact_1',
`divrem_1',
`gcd_1',
`lshift',
`lshiftc',
`mod_1',
`mod_1_1p',
`mod_1_1p_cps',
`mod_1s_2p',
`mod_1s_2p_cps',
`mod_1s_4p',
`mod_1s_4p_cps',
`mod_34lsub1',
`modexact_1c_odd',
`mul_1',
`mul_basecase',
`mullo_basecase',
`preinv_divrem_1',
`preinv_mod_1',
`redc_1',
`redc_2',
`rshift',
`sqr_basecase',
`sub_n',
`sublsh1_n',
`submul_1'')
dnl Called: PROLOGUE_cpu(GSYM_PREFIX`'foo)
dnl
dnl In the x86 code we use explicit TEXT and ALIGN() calls in the code,
dnl since different alignments are wanted in various circumstances. So for
dnl instance,
dnl
dnl TEXT
dnl ALIGN(16)
dnl PROLOGUE(mpn_add_n)
dnl ...
dnl EPILOGUE()
define(`PROLOGUE_cpu',
m4_assert_numargs(1)
m4_assert_defined(`WANT_PROFILING')
`GLOBL $1
TYPE($1,`function')
COFF_TYPE($1)
$1:
ifelse(WANT_PROFILING,`prof', ` call_mcount')
ifelse(WANT_PROFILING,`gprof', ` call_mcount')
ifelse(WANT_PROFILING,`instrument',` call_instrument(enter)')
')
dnl Usage: COFF_TYPE(GSYM_PREFIX`'foo)
dnl
dnl Emit COFF style ".def ... .endef" type information for a function, when
dnl supported. The argument should include any GSYM_PREFIX.
dnl
dnl See autoconf macro GMP_ASM_COFF_TYPE for HAVE_COFF_TYPE.
define(COFF_TYPE,
m4_assert_numargs(1)
m4_assert_defined(`HAVE_COFF_TYPE')
`ifelse(HAVE_COFF_TYPE,yes,
`.def $1
.scl 2
.type 32
.endef')')
dnl Usage: call_mcount
dnl
dnl For `gprof' style profiling, %ebp is setup as a frame pointer. None of
dnl the assembler routines use %ebp this way, so it's done only for the
dnl benefit of mcount. glibc sysdeps/i386/i386-mcount.S shows how mcount
dnl gets the current function from (%esp) and the parent from 4(%ebp).
dnl
dnl For `prof' style profiling gcc generates mcount calls without setting
dnl up %ebp, and the same is done here.
define(`call_mcount',
m4_assert_numargs(-1)
m4_assert_defined(`WANT_PROFILING')
m4_assert_defined(`MCOUNT_PIC_REG')
m4_assert_defined(`MCOUNT_NONPIC_REG')
m4_assert_defined(`MCOUNT_PIC_CALL')
m4_assert_defined(`MCOUNT_NONPIC_CALL')
`ifelse(ifdef(`PIC',`MCOUNT_PIC_REG',`MCOUNT_NONPIC_REG'),,,
` DATA
ALIGN(4)
L(mcount_data_`'mcount_counter):
W32 0
TEXT
')dnl
ifelse(WANT_PROFILING,`gprof',
` pushl %ebp
movl %esp, %ebp
')dnl
ifdef(`PIC',
` pushl %ebx
call_movl_eip_to_ebx
L(mcount_here_`'mcount_counter):
addl $_GLOBAL_OFFSET_TABLE_+[.-L(mcount_here_`'mcount_counter)], %ebx
ifelse(MCOUNT_PIC_REG,,,
` leal L(mcount_data_`'mcount_counter)@GOTOFF(%ebx), MCOUNT_PIC_REG')
MCOUNT_PIC_CALL
popl %ebx
',`dnl non-PIC
ifelse(MCOUNT_NONPIC_REG,,,
` movl `$'L(mcount_data_`'mcount_counter), MCOUNT_NONPIC_REG
')dnl
MCOUNT_NONPIC_CALL
')dnl
ifelse(WANT_PROFILING,`gprof',
` popl %ebp
')
define(`mcount_counter',incr(mcount_counter))
')
define(mcount_counter,1)
dnl Usage: call_instrument(enter|exit)
dnl
dnl Call __cyg_profile_func_enter or __cyg_profile_func_exit.
dnl
dnl For PIC, most routines don't require _GLOBAL_OFFSET_TABLE_ themselves
dnl so %ebx is just setup for these calls. It's a bit wasteful to repeat
dnl the setup for the exit call having done it earlier for the enter, but
dnl there's nowhere very convenient to hold %ebx through the length of a
dnl routine, in general.
dnl
dnl For PIC, because instrument_current_function will be within the current
dnl object file we can get it just as an offset from %eip, there's no need
dnl to use the GOT.
dnl
dnl No attempt is made to maintain the stack alignment gcc generates with
dnl -mpreferred-stack-boundary. This wouldn't be hard, but it seems highly
dnl unlikely the instrumenting functions would be doing anything that'd
dnl benefit from alignment, in particular they're unlikely to be using
dnl doubles or long doubles on the stack.
dnl
dnl The FRAME scheme is used to conveniently account for the register saves
dnl before accessing the return address. Any previous value is saved and
dnl restored, since plenty of code keeps a value across a "ret" in the
dnl middle of a routine.
define(call_instrument,
m4_assert_numargs(1)
` pushdef(`FRAME',0)
ifelse($1,exit,
` pushl %eax FRAME_pushl() C return value
')
ifdef(`PIC',
` pushl %ebx FRAME_pushl()
call_movl_eip_to_ebx
L(instrument_here_`'instrument_count):
movl %ebx, %ecx
addl $_GLOBAL_OFFSET_TABLE_+[.-L(instrument_here_`'instrument_count)], %ebx
C use addl rather than leal to avoid old gas bugs, see mpn/x86/README
addl $instrument_current_function-L(instrument_here_`'instrument_count), %ecx
pushl m4_empty_if_zero(FRAME)(%esp) FRAME_pushl() C return addr
pushl %ecx FRAME_pushl() C this function
call GSYM_PREFIX`'__cyg_profile_func_$1@PLT
addl $`'8, %esp
popl %ebx
',
` C non-PIC
pushl m4_empty_if_zero(FRAME)(%esp) FRAME_pushl() C return addr
pushl $instrument_current_function FRAME_pushl() C this function
call GSYM_PREFIX`'__cyg_profile_func_$1
addl $`'8, %esp
')
ifelse($1,exit,
` popl %eax C return value
')
popdef(`FRAME')
define(`instrument_count',incr(instrument_count))
')
define(instrument_count,1)
dnl Usage: instrument_current_function
dnl
dnl Return the current function name for instrumenting purposes. This is
dnl PROLOGUE_current_function, but it sticks at the first such name seen.
dnl
dnl Sticking to the first name seen ensures that multiple-entrypoint
dnl functions like mpn_add_nc and mpn_add_n will make enter and exit calls
dnl giving the same function address.
define(instrument_current_function,
m4_assert_numargs(-1)
`ifdef(`instrument_current_function_seen',
`instrument_current_function_seen',
`define(`instrument_current_function_seen',PROLOGUE_current_function)dnl
PROLOGUE_current_function')')
dnl Usage: call_movl_eip_to_ebx
dnl
dnl Generate a call to L(movl_eip_to_ebx), and record the need for that
dnl routine.
define(call_movl_eip_to_ebx,
m4_assert_numargs(-1)
`call L(movl_eip_to_ebx)
define(`movl_eip_to_ebx_needed',1)')
dnl Usage: generate_movl_eip_to_ebx
dnl
dnl Emit a L(movl_eip_to_ebx) routine, if needed and not already generated.
define(generate_movl_eip_to_ebx,
m4_assert_numargs(-1)
`ifelse(movl_eip_to_ebx_needed,1,
`ifelse(movl_eip_to_ebx_done,1,,
`L(movl_eip_to_ebx):
movl (%esp), %ebx
ret_internal
define(`movl_eip_to_ebx_done',1)
')')')
dnl Usage: ret
dnl
dnl Generate a "ret", but if doing instrumented profiling then call
dnl __cyg_profile_func_exit first.
define(ret,
m4_assert_numargs(-1)
m4_assert_defined(`WANT_PROFILING')
`ifelse(WANT_PROFILING,instrument,
`ret_instrument',
`ret_internal')
generate_movl_eip_to_ebx
')
dnl Usage: ret_internal
dnl
dnl A plain "ret", without any __cyg_profile_func_exit call. This can be
dnl used for a return which is internal to some function, such as when
dnl getting %eip for PIC.
define(ret_internal,
m4_assert_numargs(-1)
``ret'')
dnl Usage: ret_instrument
dnl
dnl Generate call to __cyg_profile_func_exit and then a ret. If a ret has
dnl already been seen from this function then jump to that chunk of code,
dnl rather than emitting it again.
define(ret_instrument,
m4_assert_numargs(-1)
`ifelse(m4_unquote(ret_instrument_seen_`'instrument_current_function),1,
`jmp L(instrument_exit_`'instrument_current_function)',
`define(ret_instrument_seen_`'instrument_current_function,1)
L(instrument_exit_`'instrument_current_function):
call_instrument(exit)
ret_internal')')
dnl Usage: _GLOBAL_OFFSET_TABLE_
dnl
dnl Expand to _GLOBAL_OFFSET_TABLE_ plus any necessary underscore prefix.
dnl This lets us write plain _GLOBAL_OFFSET_TABLE_ in SVR4 style, but still
dnl work with systems requiring an extra underscore such as OpenBSD.
dnl
dnl deflit is used so "leal _GLOBAL_OFFSET_TABLE_(%eax), %ebx" will come
dnl out right, though that form doesn't work properly in gas (see
dnl mpn/x86/README).
deflit(_GLOBAL_OFFSET_TABLE_,
m4_assert_defined(`GOT_GSYM_PREFIX')
`GOT_GSYM_PREFIX`_GLOBAL_OFFSET_TABLE_'')
dnl --------------------------------------------------------------------------
dnl Various x86 macros.
dnl
dnl Usage: ALIGN_OFFSET(bytes,offset)
dnl
dnl Align to `offset' away from a multiple of `bytes'.
dnl
dnl This is useful for testing, for example align to something very strict
dnl and see what effect offsets from it have, "ALIGN_OFFSET(256,32)".
dnl
dnl Generally you wouldn't execute across the padding, but it's done with
dnl nop's so it'll work.
define(ALIGN_OFFSET,
m4_assert_numargs(2)
`ALIGN($1)
forloop(`i',1,$2,` nop
')')
dnl Usage: defframe(name,offset)
dnl
dnl Make a definition like the following with which to access a parameter
dnl or variable on the stack.
dnl
dnl define(name,`FRAME+offset(%esp)')
dnl
dnl Actually m4_empty_if_zero(FRAME+offset) is used, which will save one
dnl byte if FRAME+offset is zero, by putting (%esp) rather than 0(%esp).
dnl Use define(`defframe_empty_if_zero_disabled',1) if for some reason the
dnl zero offset is wanted.
dnl
dnl The new macro also gets a check that when it's used FRAME is actually
dnl defined, and that the final %esp offset isn't negative, which would
dnl mean an attempt to access something below the current %esp.
dnl
dnl deflit() is used rather than a plain define(), so the new macro won't
dnl delete any following parenthesized expression. name(%edi) will come
dnl out say as 16(%esp)(%edi). This isn't valid assembler and should
dnl provoke an error, which is better than silently giving just 16(%esp).
dnl
dnl See README for more on the suggested way to access the stack frame.
define(defframe,
m4_assert_numargs(2)
`deflit(`$1',
m4_assert_defined(`FRAME')
`defframe_check_notbelow(`$1',$2,FRAME)dnl
defframe_empty_if_zero(FRAME+($2))(%esp)')')
dnl Called: defframe_empty_if_zero(expression)
define(defframe_empty_if_zero,
m4_assert_numargs(1)
`ifelse(defframe_empty_if_zero_disabled,1,
`eval($1)',
`m4_empty_if_zero($1)')')
dnl Called: defframe_check_notbelow(`name',offset,FRAME)
define(defframe_check_notbelow,
m4_assert_numargs(3)
`ifelse(eval(($3)+($2)<0),1,
`m4_error(`$1 at frame offset $2 used when FRAME is only $3 bytes
')')')
dnl Usage: FRAME_pushl()
dnl FRAME_popl()
dnl FRAME_addl_esp(n)
dnl FRAME_subl_esp(n)
dnl
dnl Adjust FRAME appropriately for a pushl or popl, or for an addl or subl
dnl %esp of n bytes.
dnl
dnl Using these macros is completely optional. Sometimes it makes more
dnl sense to put explicit deflit(`FRAME',N) forms, especially when there's
dnl jumps and different sequences of FRAME values need to be used in
dnl different places.
define(FRAME_pushl,
m4_assert_numargs(0)
m4_assert_defined(`FRAME')
`deflit(`FRAME',eval(FRAME+4))')
define(FRAME_popl,
m4_assert_numargs(0)
m4_assert_defined(`FRAME')
`deflit(`FRAME',eval(FRAME-4))')
define(FRAME_addl_esp,
m4_assert_numargs(1)
m4_assert_defined(`FRAME')
`deflit(`FRAME',eval(FRAME-($1)))')
define(FRAME_subl_esp,
m4_assert_numargs(1)
m4_assert_defined(`FRAME')
`deflit(`FRAME',eval(FRAME+($1)))')
dnl Usage: defframe_pushl(name)
dnl
dnl Do a combination FRAME_pushl() and a defframe() to name the stack
dnl location just pushed. This should come after a pushl instruction.
dnl Putting it on the same line works and avoids lengthening the code. For
dnl example,
dnl
dnl pushl %eax defframe_pushl(VAR_COUNTER)
dnl
dnl Notice the defframe() is done with an unquoted -FRAME thus giving its
dnl current value without tracking future changes.
define(defframe_pushl,
m4_assert_numargs(1)
`FRAME_pushl()defframe(`$1',-FRAME)')
dnl --------------------------------------------------------------------------
dnl Assembler instruction macros.
dnl
dnl Usage: emms_or_femms
dnl femms_available_p
dnl
dnl femms_available_p expands to 1 or 0 according to whether the AMD 3DNow
dnl femms instruction is available. emms_or_femms expands to femms if
dnl available, or emms if not.
dnl
dnl emms_or_femms is meant for use in the K6 directory where plain K6
dnl (without femms) and K6-2 and K6-3 (with a slightly faster femms) are
dnl supported together.
dnl
dnl On K7 femms is no longer faster and is just an alias for emms, so plain
dnl emms may as well be used.
define(femms_available_p,
m4_assert_numargs(-1)
`m4_ifdef_anyof_p(
`HAVE_HOST_CPU_k62',
`HAVE_HOST_CPU_k63',
`HAVE_HOST_CPU_athlon')')
define(emms_or_femms,
m4_assert_numargs(-1)
`ifelse(femms_available_p,1,`femms',`emms')')
dnl Usage: femms
dnl
dnl Gas 2.9.1 which comes with FreeBSD 3.4 doesn't support femms, so the
dnl following is a replacement using .byte.
define(femms,
m4_assert_numargs(-1)
`.byte 15,14 C AMD 3DNow femms')
dnl Usage: jadcl0(op)
dnl
dnl Generate a jnc/incl as a substitute for adcl $0,op. Note this isn't an
dnl exact replacement, since it doesn't set the flags like adcl does.
dnl
dnl This finds a use in K6 mpn_addmul_1, mpn_submul_1, mpn_mul_basecase and
dnl mpn_sqr_basecase because on K6 an adcl is slow, the branch
dnl misprediction penalty is small, and the multiply algorithm used leads
dnl to a carry bit on average only 1/4 of the time.
dnl
dnl jadcl0_disabled can be set to 1 to instead generate an ordinary adcl
dnl for comparison. For example,
dnl
dnl define(`jadcl0_disabled',1)
dnl
dnl When using a register operand, eg. "jadcl0(%edx)", the jnc/incl code is
dnl the same size as an adcl. This makes it possible to use the exact same
dnl computed jump code when testing the relative speed of the two.
define(jadcl0,
m4_assert_numargs(1)
`ifelse(jadcl0_disabled,1,
`adcl $`'0, $1',
`jnc L(jadcl0_`'jadcl0_counter)
incl $1
L(jadcl0_`'jadcl0_counter):
define(`jadcl0_counter',incr(jadcl0_counter))')')
define(jadcl0_counter,1)
dnl Usage: x86_lookup(target, key,value, key,value, ...)
dnl x86_lookup_p(target, key,value, key,value, ...)
dnl
dnl Look for `target' among the `key' parameters.
dnl
dnl x86_lookup expands to the corresponding `value', or generates an error
dnl if `target' isn't found.
dnl
dnl x86_lookup_p expands to 1 if `target' is found, or 0 if not.
define(x86_lookup,
m4_assert_numargs_range(1,999)
`ifelse(eval($#<3),1,
`m4_error(`unrecognised part of x86 instruction: $1
')',
`ifelse(`$1',`$2', `$3',
`x86_lookup(`$1',shift(shift(shift($@))))')')')
define(x86_lookup_p,
m4_assert_numargs_range(1,999)
`ifelse(eval($#<3),1, `0',
`ifelse(`$1',`$2', `1',
`x86_lookup_p(`$1',shift(shift(shift($@))))')')')
dnl Usage: x86_opcode_reg32(reg)
dnl x86_opcode_reg32_p(reg)
dnl
dnl x86_opcode_reg32 expands to the standard 3 bit encoding for the given
dnl 32-bit register, eg. `%ebp' turns into 5.
dnl
dnl x86_opcode_reg32_p expands to 1 if reg is a valid 32-bit register, or 0
dnl if not.
define(x86_opcode_reg32,
m4_assert_numargs(1)
`x86_lookup(`$1',x86_opcode_reg32_list)')
define(x86_opcode_reg32_p,
m4_assert_onearg()
`x86_lookup_p(`$1',x86_opcode_reg32_list)')
define(x86_opcode_reg32_list,
``%eax',0,
`%ecx',1,
`%edx',2,
`%ebx',3,
`%esp',4,
`%ebp',5,
`%esi',6,
`%edi',7')
dnl Usage: x86_opcode_tttn(cond)
dnl
dnl Expand to the 4-bit "tttn" field value for the given x86 branch
dnl condition (like `c', `ae', etc).
define(x86_opcode_tttn,
m4_assert_numargs(1)
`x86_lookup(`$1',x86_opcode_ttn_list)')
define(x86_opcode_tttn_list,
``o', 0,
`no', 1,
`b', 2, `c', 2, `nae',2,
`nb', 3, `nc', 3, `ae', 3,
`e', 4, `z', 4,
`ne', 5, `nz', 5,
`be', 6, `na', 6,
`nbe', 7, `a', 7,
`s', 8,
`ns', 9,
`p', 10, `pe', 10, `npo',10,
`np', 11, `npe',11, `po', 11,
`l', 12, `nge',12,
`nl', 13, `ge', 13,
`le', 14, `ng', 14,
`nle',15, `g', 15')
dnl Usage: cmovCC(%srcreg,%dstreg)
dnl
dnl Emit a cmov instruction, using a .byte sequence, since various past
dnl versions of gas don't know cmov. For example,
dnl
dnl cmovz( %eax, %ebx)
dnl
dnl The source operand can only be a plain register. (m4 code implementing
dnl full memory addressing modes exists, believe it or not, but isn't
dnl currently needed and isn't included.)
dnl
dnl All the standard conditions are defined. Attempting to use one without
dnl the macro parentheses, such as just "cmovbe %eax, %ebx", will provoke
dnl an error. This protects against writing something old gas wouldn't
dnl understand.
dnl Called: define_cmov_many(cond,tttn,cond,tttn,...)
define(define_cmov_many,
`ifelse(m4_length(`$1'),0,,
`define_cmov(`$1',`$2')define_cmov_many(shift(shift($@)))')')
dnl Called: define_cmov(cond,tttn)
dnl Emit basically define(cmov<cond>,`cmov_internal(<cond>,<ttn>,`$1',`$2')')
define(define_cmov,
m4_assert_numargs(2)
`define(`cmov$1',
m4_instruction_wrapper()
m4_assert_numargs(2)
`cmov_internal'(m4_doublequote($`'0),``$2'',dnl
m4_doublequote($`'1),m4_doublequote($`'2)))')
define_cmov_many(x86_opcode_tttn_list)
dnl Called: cmov_internal(name,tttn,src,dst)
define(cmov_internal,
m4_assert_numargs(4)
`.byte dnl
15, dnl
eval(64+$2), dnl
eval(192+8*x86_opcode_reg32(`$4')+x86_opcode_reg32(`$3')) dnl
C `$1 $3, $4'')
dnl Usage: x86_opcode_regmmx(reg)
dnl
dnl Validate the given mmx register, and return its number, 0 to 7.
define(x86_opcode_regmmx,
m4_assert_numargs(1)
`x86_lookup(`$1',x86_opcode_regmmx_list)')
define(x86_opcode_regmmx_list,
``%mm0',0,
`%mm1',1,
`%mm2',2,
`%mm3',3,
`%mm4',4,
`%mm5',5,
`%mm6',6,
`%mm7',7')
dnl Usage: psadbw(%srcreg,%dstreg)
dnl
dnl Oldish versions of gas don't know psadbw, in particular gas 2.9.1 on
dnl FreeBSD 3.3 and 3.4 doesn't, so instead emit .byte sequences. For
dnl example,
dnl
dnl psadbw( %mm1, %mm2)
dnl
dnl Only register->register forms are supported here, which suffices for
dnl the current code.
define(psadbw,
m4_instruction_wrapper()
m4_assert_numargs(2)
`.byte 0x0f,0xf6,dnl
eval(192+x86_opcode_regmmx(`$2')*8+x86_opcode_regmmx(`$1')) dnl
C `psadbw $1, $2'')
dnl Usage: Zdisp(inst,op,op,op)
dnl
dnl Generate explicit .byte sequences if necessary to force a byte-sized
dnl zero displacement on an instruction. For example,
dnl
dnl Zdisp( movl, 0,(%esi), %eax)
dnl
dnl expands to
dnl
dnl .byte 139,70,0 C movl 0(%esi), %eax
dnl
dnl If the displacement given isn't 0, then normal assembler code is
dnl generated. For example,
dnl
dnl Zdisp( movl, 4,(%esi), %eax)
dnl
dnl expands to
dnl
dnl movl 4(%esi), %eax
dnl
dnl This means a single Zdisp() form can be used with an expression for the
dnl displacement, and .byte will be used only if necessary. The
dnl displacement argument is eval()ed.
dnl
dnl Because there aren't many places a 0(reg) form is wanted, Zdisp is
dnl implemented with a table of instructions and encodings. A new entry is
dnl needed for any different operation or registers. The table is split
dnl into separate macros to avoid overflowing BSD m4 macro expansion space.
define(Zdisp,
m4_assert_numargs(4)
`define(`Zdisp_found',0)dnl
Zdisp_1($@)dnl
Zdisp_2($@)dnl
Zdisp_3($@)dnl
Zdisp_4($@)dnl
ifelse(Zdisp_found,0,
`m4_error(`unrecognised instruction in Zdisp: $1 $2 $3 $4
')')')
define(Zdisp_1,`dnl
Zdisp_match( adcl, 0,(%edx), %eax, `0x13,0x42,0x00', $@)`'dnl
Zdisp_match( adcl, 0,(%edx), %ebx, `0x13,0x5a,0x00', $@)`'dnl
Zdisp_match( adcl, 0,(%edx), %esi, `0x13,0x72,0x00', $@)`'dnl
Zdisp_match( addl, %ebx, 0,(%edi), `0x01,0x5f,0x00', $@)`'dnl
Zdisp_match( addl, %ecx, 0,(%edi), `0x01,0x4f,0x00', $@)`'dnl
Zdisp_match( addl, %esi, 0,(%edi), `0x01,0x77,0x00', $@)`'dnl
Zdisp_match( sbbl, 0,(%edx), %eax, `0x1b,0x42,0x00', $@)`'dnl
Zdisp_match( sbbl, 0,(%edx), %esi, `0x1b,0x72,0x00', $@)`'dnl
Zdisp_match( subl, %ecx, 0,(%edi), `0x29,0x4f,0x00', $@)`'dnl
Zdisp_match( movzbl, 0,(%eax,%ebp), %eax, `0x0f,0xb6,0x44,0x28,0x00', $@)`'dnl
Zdisp_match( movzbl, 0,(%ecx,%edi), %edi, `0x0f,0xb6,0x7c,0x39,0x00', $@)`'dnl
Zdisp_match( adc, 0,(%ebx,%ecx,4), %eax, `0x13,0x44,0x8b,0x00', $@)`'dnl
Zdisp_match( sbb, 0,(%ebx,%ecx,4), %eax, `0x1b,0x44,0x8b,0x00', $@)`'dnl
')
define(Zdisp_2,`dnl
Zdisp_match( movl, %eax, 0,(%edi), `0x89,0x47,0x00', $@)`'dnl
Zdisp_match( movl, %ebx, 0,(%edi), `0x89,0x5f,0x00', $@)`'dnl
Zdisp_match( movl, %esi, 0,(%edi), `0x89,0x77,0x00', $@)`'dnl
Zdisp_match( movl, 0,(%ebx), %eax, `0x8b,0x43,0x00', $@)`'dnl
Zdisp_match( movl, 0,(%ebx), %esi, `0x8b,0x73,0x00', $@)`'dnl
Zdisp_match( movl, 0,(%edx), %eax, `0x8b,0x42,0x00', $@)`'dnl
Zdisp_match( movl, 0,(%esi), %eax, `0x8b,0x46,0x00', $@)`'dnl
Zdisp_match( movl, 0,(%esi,%ecx,4), %eax, `0x8b,0x44,0x8e,0x00', $@)`'dnl
Zdisp_match( mov, 0,(%esi,%ecx,4), %eax, `0x8b,0x44,0x8e,0x00', $@)`'dnl
Zdisp_match( mov, %eax, 0,(%edi,%ecx,4), `0x89,0x44,0x8f,0x00', $@)`'dnl
')
define(Zdisp_3,`dnl
Zdisp_match( movq, 0,(%eax,%ecx,8), %mm0, `0x0f,0x6f,0x44,0xc8,0x00', $@)`'dnl
Zdisp_match( movq, 0,(%ebx,%eax,4), %mm0, `0x0f,0x6f,0x44,0x83,0x00', $@)`'dnl
Zdisp_match( movq, 0,(%ebx,%eax,4), %mm2, `0x0f,0x6f,0x54,0x83,0x00', $@)`'dnl
Zdisp_match( movq, 0,(%ebx,%ecx,4), %mm0, `0x0f,0x6f,0x44,0x8b,0x00', $@)`'dnl
Zdisp_match( movq, 0,(%edx), %mm0, `0x0f,0x6f,0x42,0x00', $@)`'dnl
Zdisp_match( movq, 0,(%esi), %mm0, `0x0f,0x6f,0x46,0x00', $@)`'dnl
Zdisp_match( movq, %mm0, 0,(%edi), `0x0f,0x7f,0x47,0x00', $@)`'dnl
Zdisp_match( movq, %mm2, 0,(%ecx,%eax,4), `0x0f,0x7f,0x54,0x81,0x00', $@)`'dnl
Zdisp_match( movq, %mm2, 0,(%edx,%eax,4), `0x0f,0x7f,0x54,0x82,0x00', $@)`'dnl
Zdisp_match( movq, %mm0, 0,(%edx,%ecx,8), `0x0f,0x7f,0x44,0xca,0x00', $@)`'dnl
')
define(Zdisp_4,`dnl
Zdisp_match( movd, 0,(%eax,%ecx,4), %mm0, `0x0f,0x6e,0x44,0x88,0x00', $@)`'dnl
Zdisp_match( movd, 0,(%eax,%ecx,8), %mm1, `0x0f,0x6e,0x4c,0xc8,0x00', $@)`'dnl
Zdisp_match( movd, 0,(%edx,%ecx,8), %mm0, `0x0f,0x6e,0x44,0xca,0x00', $@)`'dnl
Zdisp_match( movd, %mm0, 0,(%eax,%ecx,4), `0x0f,0x7e,0x44,0x88,0x00', $@)`'dnl
Zdisp_match( movd, %mm0, 0,(%ecx,%eax,4), `0x0f,0x7e,0x44,0x81,0x00', $@)`'dnl
Zdisp_match( movd, %mm2, 0,(%ecx,%eax,4), `0x0f,0x7e,0x54,0x81,0x00', $@)`'dnl
Zdisp_match( movd, %mm0, 0,(%edx,%ecx,4), `0x0f,0x7e,0x44,0x8a,0x00', $@)`'dnl
')
define(Zdisp_match,
m4_assert_numargs(9)
`ifelse(eval(m4_stringequal_p(`$1',`$6')
&& m4_stringequal_p(`$2',0)
&& m4_stringequal_p(`$3',`$8')
&& m4_stringequal_p(`$4',`$9')),1,
`define(`Zdisp_found',1)dnl
ifelse(eval(`$7'),0,
` .byte $5 C `$1 0$3, $4'',
` $6 $7$8, $9')',
`ifelse(eval(m4_stringequal_p(`$1',`$6')
&& m4_stringequal_p(`$2',`$7')
&& m4_stringequal_p(`$3',0)
&& m4_stringequal_p(`$4',`$9')),1,
`define(`Zdisp_found',1)dnl
ifelse(eval(`$8'),0,
` .byte $5 C `$1 $2, 0$4'',
` $6 $7, $8$9')')')')
dnl Usage: shldl(count,src,dst)
dnl shrdl(count,src,dst)
dnl shldw(count,src,dst)
dnl shrdw(count,src,dst)
dnl
dnl Generate a double-shift instruction, possibly omitting a %cl count
dnl parameter if that's what the assembler requires, as indicated by
dnl WANT_SHLDL_CL in config.m4. For example,
dnl
dnl shldl( %cl, %eax, %ebx)
dnl
dnl turns into either
dnl
dnl shldl %cl, %eax, %ebx
dnl or
dnl shldl %eax, %ebx
dnl
dnl Immediate counts are always passed through unchanged. For example,
dnl
dnl shrdl( $2, %esi, %edi)
dnl becomes
dnl shrdl $2, %esi, %edi
dnl
dnl
dnl If you forget to use the macro form "shldl( ...)" and instead write
dnl just a plain "shldl ...", an error results. This ensures the necessary
dnl variant treatment of %cl isn't accidentally bypassed.
define(define_shd_instruction,
m4_assert_numargs(1)
`define($1,
m4_instruction_wrapper()
m4_assert_numargs(3)
`shd_instruction'(m4_doublequote($`'0),m4_doublequote($`'1),dnl
m4_doublequote($`'2),m4_doublequote($`'3)))')
dnl Effectively: define(shldl,`shd_instruction(`$0',`$1',`$2',`$3')') etc
define_shd_instruction(shldl)
define_shd_instruction(shrdl)
define_shd_instruction(shldw)
define_shd_instruction(shrdw)
dnl Called: shd_instruction(op,count,src,dst)
define(shd_instruction,
m4_assert_numargs(4)
m4_assert_defined(`WANT_SHLDL_CL')
`ifelse(eval(m4_stringequal_p(`$2',`%cl') && !WANT_SHLDL_CL),1,
``$1' `$3', `$4'',
``$1' `$2', `$3', `$4'')')
dnl Usage: ASSERT([cond][,instructions])
dnl
dnl If WANT_ASSERT is 1, output the given instructions and expect the given
dnl flags condition to then be satisfied. For example,
dnl
dnl ASSERT(ne, `cmpl %eax, %ebx')
dnl
dnl The instructions can be omitted to just assert a flags condition with
dnl no extra calculation. For example,
dnl
dnl ASSERT(nc)
dnl
dnl When `instructions' is not empty, a pushf/popf is added to preserve the
dnl flags, but the instructions themselves must preserve any registers that
dnl matter. FRAME is adjusted for the push and pop, so the instructions
dnl given can use defframe() stack variables.
dnl
dnl The condition can be omitted to just output the given instructions when
dnl assertion checking is wanted. In this case the pushf/popf is omitted.
dnl For example,
dnl
dnl ASSERT(, `movl %eax, VAR_KEEPVAL')
define(ASSERT,
m4_assert_numargs_range(1,2)
m4_assert_defined(`WANT_ASSERT')
`ifelse(WANT_ASSERT,1,
`ifelse(`$1',,
`$2',
`C ASSERT
ifelse(`$2',,,` pushf ifdef(`FRAME',`FRAME_pushl()')')
$2
j`$1' L(ASSERT_ok`'ASSERT_counter)
ud2 C assertion failed
L(ASSERT_ok`'ASSERT_counter):
ifelse(`$2',,,` popf ifdef(`FRAME',`FRAME_popl()')')
define(`ASSERT_counter',incr(ASSERT_counter))')')')
define(ASSERT_counter,1)
dnl Usage: movl_text_address(label,register)
dnl
dnl Get the address of a text segment label, using either a plain movl or a
dnl position-independent calculation, as necessary. For example,
dnl
dnl movl_code_address(L(foo),%eax)
dnl
dnl This macro is only meant for use in ASSERT()s or when testing, since
dnl the PIC sequence it generates will want to be done with a ret balancing
dnl the call on CPUs with return address branch prediction.
dnl
dnl The addl generated here has a backward reference to the label, and so
dnl won't suffer from the two forwards references bug in old gas (described
dnl in mpn/x86/README).
define(movl_text_address,
m4_assert_numargs(2)
`ifdef(`PIC',
`call L(movl_text_address_`'movl_text_address_counter)
L(movl_text_address_`'movl_text_address_counter):
popl $2 C %eip
addl `$'$1-L(movl_text_address_`'movl_text_address_counter), $2
define(`movl_text_address_counter',incr(movl_text_address_counter))',
`movl `$'$1, $2')')
define(movl_text_address_counter,1)
dnl Usage: notl_or_xorl_GMP_NUMB_MASK(reg)
dnl
dnl Expand to either "notl `reg'" or "xorl $GMP_NUMB_BITS,`reg'" as
dnl appropriate for nails in use or not.
define(notl_or_xorl_GMP_NUMB_MASK,
m4_assert_numargs(1)
`ifelse(GMP_NAIL_BITS,0,
`notl `$1'',
`xorl $GMP_NUMB_MASK, `$1'')')
dnl Usage LEA(symbol,reg)
dnl Usage LEAL(symbol_local_to_file,reg)
define(`LEA',
m4_assert_numargs(2)
`ifdef(`PIC',`dnl
ifelse(index(defn(`load_eip'), `$2'),-1,
`m4append(`load_eip',
` TEXT
ALIGN(16)
L(movl_eip_`'substr($2,1)):
movl (%esp), $2
ret_internal
')')dnl
call L(movl_eip_`'substr($2,1))
addl $_GLOBAL_OFFSET_TABLE_, $2
movl $1@GOT($2), $2
',`
movl `$'$1, $2
')')
define(`LEAL',
m4_assert_numargs(2)
`ifdef(`PIC',`dnl
ifelse(index(defn(`load_eip'), `$2'),-1,
`m4append(`load_eip',
` TEXT
ALIGN(16)
L(movl_eip_`'substr($2,1)):
movl (%esp), $2
ret_internal
')')dnl
call L(movl_eip_`'substr($2,1))
addl $_GLOBAL_OFFSET_TABLE_, $2
leal $1@GOTOFF($2), $2
',`
movl `$'$1, $2
')')
dnl ASM_END
define(`ASM_END',`load_eip')
define(`load_eip', `') dnl updated in LEA/LEAL
define(`DEF_OBJECT',
m4_assert_numargs_range(1,2)
`RODATA
ALIGN(ifelse($#,1,2,$2))
$1:
')
define(`END_OBJECT',
m4_assert_numargs(1)
` SIZE(`$1',.-`$1')')
dnl Usage: CALL(funcname)
dnl
define(`CALL',
m4_assert_numargs(1)
`ifdef(`PIC',
`call GSYM_PREFIX`'$1@PLT',
`call GSYM_PREFIX`'$1')')
ifdef(`PIC',
`define(`PIC_WITH_EBX')',
`undefine(`PIC_WITH_EBX')')
divert`'dnl