.\" $OpenBSD: crypto.9,v 1.25 2003/07/11 13:47:41 jmc Exp $
.\" $NetBSD: opencrypto.9,v 1.17 2017/07/03 21:28:48 wiz Exp $
.\"
.\" The author of this man page is Angelos D. Keromytis (angelos@cis.upenn.edu)
.\"
.\" Copyright (c) 2000, 2001 Angelos D. Keromytis
.\"
.\" Permission to use, copy, and modify this software with or without fee
.\" is hereby granted, provided that this entire notice is included in
.\" all source code copies of any software which is or includes a copy or
.\" modification of this software.
.\"
.\" THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
.\" IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
.\" REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
.\" MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
.\" PURPOSE.
.\"
.Dd May 26, 2017
.Dt OPENCRYPTO 9
.Os
.Sh NAME
.Nm opencrypto ,
.Nm crypto_get_driverid ,
.Nm crypto_register ,
.Nm crypto_kregister ,
.Nm crypto_unregister ,
.Nm crypto_unregister_all ,
.Nm crypto_done ,
.Nm crypto_kdone ,
.Nm crypto_newsession ,
.Nm crypto_freesession ,
.Nm crypto_dispatch ,
.Nm crypto_kdispatch ,
.Nm crypto_getreq ,
.Nm crypto_freereq
.Nm crypto_kgetreq ,
.Nm crypto_kfreereq
.Nd API for cryptographic services in the kernel
.Sh SYNOPSIS
.In opencrypto/cryptodev.h
.Ft int32_t
.Fn crypto_get_driverid "u_int32_t"
.Ft int
.Fn crypto_register "u_int32_t" "int" "u_int16_t" "u_int32_t" "int (*)(void *, u_int32_t *, struct cryptoini *)" "int (*)(void *, u_int32_t *)" "int (*)(u_int64_t)" "int (*)(struct cryptop *)" "void *"
.Ft int
.Fn crypto_kregister "u_int32_t" "int" "u_int32_t" "int (*)(void *, struct cryptkop *, int)" "void *"
.Ft int
.Fn crypto_unregister "u_int32_t" "int"
.Ft int
.Fn crypto_unregister_all "u_int32_t"
.Ft void
.Fn crypto_done "struct cryptop *"
.Ft void
.Fn crypto_kdone "struct cryptkop *"
.Ft int
.Fn crypto_newsession "u_int64_t *" "struct cryptoini *" "int"
.Ft int
.Fn crypto_freesession "u_int64_t"
.Ft int
.Fn crypto_dispatch "struct cryptop *"
.Ft int
.Fn crypto_kdispatch "struct cryptkop *"
.Ft struct cryptop *
.Fn crypto_getreq "int"
.Ft void
.Fn crypto_freereq "struct cryptop *"
.Ft struct cryptop *
.Fn crypto_kgetreq "int" "int"
.Ft void
.Fn crypto_kfreereq "struct cryptop *"
.Bd -literal
#define EALG_MAX_BLOCK_LEN 16
struct cryptoini {
int cri_alg;
int cri_klen;
int cri_rnd;
void *cri_key;
u_int8_t cri_iv[EALG_MAX_BLOCK_LEN];
struct cryptoini *cri_next;
};
struct cryptodesc {
int crd_skip;
int crd_len;
int crd_inject;
int crd_flags;
struct cryptoini CRD_INI;
struct cryptodesc *crd_next;
};
struct cryptop {
TAILQ_ENTRY(cryptop) crp_next;
u_int64_t crp_sid;
int crp_ilen;
int crp_olen;
int crp_etype;
int crp_flags;
void *crp_buf;
void *crp_opaque;
struct cryptodesc *crp_desc;
int (*crp_callback)(struct cryptop *);
void *crp_mac;
};
struct crparam {
void *crp_p;
u_int crp_nbits;
};
#define CRK_MAXPARAM 8
struct cryptkop {
TAILQ_ENTRY(cryptkop) krp_next;
u_int krp_op; /* i.e. CRK_MOD_EXP or other */
u_int krp_status; /* return status */
u_short krp_iparams; /* # of input parameters */
u_short krp_oparams; /* # of output parameters */
u_int32_t krp_hid;
struct crparam krp_param[CRK_MAXPARAM]; /* kvm */
int (*krp_callback)(struct cryptkop *);
};
.Ed
.Sh DESCRIPTION
.Nm
is a framework for drivers of cryptographic hardware to register with
the kernel so
.Dq consumers
(other kernel subsystems, and eventually
users through an appropriate device) are able to make use of it.
Drivers register with the framework the algorithms they support,
and provide entry points (functions) the framework may call to
establish, use, and tear down sessions.
Sessions are used to cache cryptographic information in a particular driver
(or associated hardware), so initialization is not needed with every request.
Consumers of cryptographic services pass a set of
descriptors that instruct the framework (and the drivers registered
with it) of the operations that should be applied on the data (more
than one cryptographic operation can be requested).
.Pp
Keying operations are supported as well.
Unlike the symmetric operators described above,
these sessionless commands perform mathematical operations using
input and output parameters.
.Pp
Since the consumers may not be associated with a process, drivers may
not use condition variables:
.Xr condvar 9 .
The same holds for the framework.
Thus, a callback mechanism is used
to notify a consumer that a request has been completed (the
callback is specified by the consumer on an per-request basis).
The callback is invoked by the framework whether the request was
successfully completed or not.
An error indication is provided in the latter case.
A specific error code,
.Er EAGAIN ,
is used to indicate that a session number has changed and that the
request may be re-submitted immediately with the new session number.
Errors are only returned to the invoking function if not
enough information to call the callback is available (meaning, there
was a fatal error in verifying the arguments).
No callback mechanism is used for session initialization and teardown.
.Pp
The
.Fn crypto_newsession
routine is called by consumers of cryptographic services (such as the
.Xr ipsec 4
stack) that wish to establish a new session with the framework.
On success, the first argument will contain the Session Identifier (SID).
The second argument contains all the necessary information for
the driver to establish the session.
The third argument indicates whether a
hardware driver should be used (1) or not (0).
The various fields in the
.Fa cryptoini
structure are:
.Bl -tag -width foobarmoocow
.It Fa cri_alg
Contains an algorithm identifier.
Currently supported algorithms are:
.Bd -literal
CRYPTO_DES_CBC
CRYPTO_3DES_CBC
CRYPTO_BLF_CBC
CRYPTO_CAST_CBC
CRYPTO_CAMELLIA_CBC
CRYPTO_SKIPJACK_CBC
CRYPTO_ARC4
CRYPTO_AES_CBC
CRYPTO_AES_CTR
CRYPTO_AES_GCM_16
CRYPTO_AES_GMAC
CRYPTO_AES_128_GMAC
CRYPTO_AES_192_GMAC
CRYPTO_AES_256_GMAC
CRYPTO_AES_XCBC_MAC_96
CRYPTO_MD5
CRYPTO_MD5_HMAC
CRYPTO_MD5_HMAC_96
CRYPTO_MD5_KPDK
CRYPTO_NULL_CBC
CRYPTO_NULL_HMAC
CRYPTO_SHA1
CRYPTO_SHA1_HMAC
CRYPTO_SHA1_HMAC_96
CRYPTO_SHA1_KPDK
CRYPTO_SHA2_256_HMAC
CRYPTO_SHA2_384_HMAC
CRYPTO_SHA2_512_HMAC
CRYPTO_RIPEMD160_HMAC
CRYPTO_RIPEMD160_HMAC_96
CRYPTO_DEFLATE_COMP
CRYPTO_DEFLATE_COMP_NOGROW
CRYPTO_GZIP_COMP
.Ed
.Pp
.It Fa cri_klen
Specifies the length of the key in bits, for variable-size key
algorithms.
.It Fa cri_rnd
Specifies the number of rounds to be used with the algorithm, for
variable-round algorithms.
.It Fa cri_key
Contains the key to be used with the algorithm.
.It Fa cri_iv
Contains an explicit initialization vector (IV), if it does not prefix
the data.
This field is ignored during initialization.
If no IV is explicitly passed (see below on details), a random IV is used
by the device driver processing the request.
.It Fa cri_next
Contains a pointer to another
.Fa cryptoini
structure.
Multiple such structures may be linked to establish multi-algorithm sessions
.Pf ( Xr ipsec 4
is an example consumer of such a feature).
.El
.Pp
The
.Fa cryptoini
structure and its contents will not be modified by the framework (or
the drivers used).
Subsequent requests for processing that use the
SID returned will avoid the cost of re-initializing the hardware (in
essence, SID acts as an index in the session cache of the driver).
.Pp
.Fn crypto_freesession
is called with the SID returned by
.Fn crypto_newsession
to disestablish the session.
.Pp
.Fn crypto_dispatch
is called to process a request.
The various fields in the
.Fa cryptop
structure are:
.Bl -tag -width crp_callback
.It Fa crp_sid
Contains the SID.
.It Fa crp_ilen
Indicates the total length in bytes of the buffer to be processed.
.It Fa crp_olen
On return, contains the length of the result, not including
.Fa crd_skip .
For symmetric crypto operations, this will be the same as the input length.
.It Fa crp_alloctype
Indicates the type of buffer, as used in the kernel
.Xr malloc 9
routine.
This will be used if the framework needs to allocate a new
buffer for the result (or for re-formatting the input).
.It Fa crp_callback
This routine is invoked upon completion of the request, whether
successful or not.
It is invoked through the
.Fn crypto_done
routine.
If the request was not successful, an error code is set in the
.Fa crp_etype
field.
It is the responsibility of the callback routine to set the appropriate
.Xr spl 9
level.
.It Fa crp_etype
Contains the error type, if any errors were encountered, or zero if
the request was successfully processed.
If the
.Er EAGAIN
error code is returned, the SID has changed (and has been recorded in the
.Fa crp_sid
field).
The consumer should record the new SID and use it in all subsequent requests.
In this case, the request may be re-submitted immediately.
This mechanism is used by the framework to perform
session migration (move a session from one driver to another, because
of availability, performance, or other considerations).
.Pp
Note that this field only makes sense when examined by
the callback routine specified in
.Fa crp_callback .
Errors are returned to the invoker of
.Fn crypto_process
only when enough information is not present to call the callback
routine (i.e., if the pointer passed is
.Dv NULL
or if no callback routine was specified).
.It Fa crp_flags
Is a bitmask of flags associated with this request.
Currently defined flags are:
.Bl -tag -width CRYPTO_F_IMBUF
.It Dv CRYPTO_F_IMBUF
The buffer pointed to by
.Fa crp_buf
is an mbuf chain.
.El
.Pp
.It Fa crp_buf
Points to the input buffer.
On return (when the callback is invoked),
it contains the result of the request.
The input buffer may be an mbuf
chain or a contiguous buffer (of a type identified by
.Fa crp_alloctype ) ,
depending on
.Fa crp_flags .
.It Fa crp_opaque
This is passed through the crypto framework untouched and is
intended for the invoking application's use.
.It Fa crp_desc
This is a linked list of descriptors.
Each descriptor provides
information about what type of cryptographic operation should be done
on the input buffer.
The various fields are:
.Bl -tag -width ".Fa crd_inject"
.It Fa crd_skip
The offset in the input buffer where processing should start.
.It Fa crd_len
How many bytes, after
.Fa crd_skip ,
should be processed.
.It Fa crd_inject
Offset from the beginning of the buffer to insert any results.
For encryption algorithms, this is where the initialization vector
(IV) will be inserted when encrypting or where it can be found when
decrypting (subject to
.Fa crd_flags ) .
For MAC algorithms, this is where the result of the keyed hash will be
inserted.
.It Fa crd_flags
For adjusting general operation from userland,
the following flags are defined:
.Bl -tag -width CRD_F_IV_EXPLICIT
.It Dv CRD_F_ENCRYPT
For encryption algorithms, this bit is set when encryption is required
(when not set, decryption is performed).
.It Dv CRD_F_IV_PRESENT
For encryption algorithms, this bit is set when the IV already
precedes the data, so the
.Fa crd_inject
value will be ignored and no IV will be written in the buffer.
Otherwise, the IV used to encrypt the packet will be written
at the location pointed to by
.Fa crd_inject .
Some applications that do special
.Dq IV cooking ,
such as the half-IV mode in
.Xr ipsec 4 ,
can use this flag to indicate that the IV should not be written on the packet.
This flag is typically used in conjunction with the
.Dv CRD_F_IV_EXPLICIT
flag.
.It Dv CRD_F_IV_EXPLICIT
For encryption algorithms, this bit is set when the IV is explicitly
provided by the consumer in the
.Fa crd_iv
fields.
Otherwise, for encryption operations the IV is provided for by
the driver used to perform the operation, whereas for decryption
operations it is pointed to by the
.Fa crd_inject
field.
This flag is typically used when the IV is calculated
.Dq on the fly
by the consumer, and does not precede the data (some
.Xr ipsec 4
configurations, and the encrypted swap are two such examples).
.It Dv CRD_F_COMP
For compression algorithms, this bit is set when compression is required (when
not set, decompression is performed).
.El
.It Fa CRD_INI
This
.Fa cryptoini
structure will not be modified by the framework or the device drivers.
Since this information accompanies every cryptographic
operation request, drivers may re-initialize state on-demand
(typically an expensive operation).
Furthermore, the cryptographic
framework may re-route requests as a result of full queues or hardware
failure, as described above.
.It Fa crd_next
Point to the next descriptor.
Linked operations are useful in protocols such as
.Xr ipsec 4 ,
where multiple cryptographic transforms may be applied on the same
block of data.
.El
.El
.Pp
.Fn crypto_getreq
allocates a
.Fa cryptop
structure with a linked list of as many
.Fa cryptodesc
structures as were specified in the argument passed to it.
.Pp
.Fn crypto_freereq
deallocates a structure
.Fa cryptop
and any
.Fa cryptodesc
structures linked to it.
Note that it is the responsibility of the
callback routine to do the necessary cleanups associated with the
opaque field in the
.Fa cryptop
structure.
.Pp
.Fn crypto_kdispatch
is called to perform a keying operation.
The various fields in the
.Fa crytokop
structure are:
.Bl -tag -width crp_alloctype
.It Fa krp_op
Operation code, such as CRK_MOD_EXP.
.It Fa krp_status
Return code.
This errno-style variable indicates whether there were lower level reasons
for operation failure.
.It Fa krp_iparams
Number of input parameters to the specified operation.
Note that each operation has a (typically hardwired) number of such parameters.
.It Fa krp_oparams
Number of output parameters from the specified operation.
Note that each operation has a (typically hardwired) number of such parameters.
.It Fa krp_kvp
An array of kernel memory blocks containing the parameters.
.It Fa krp_hid
Identifier specifying which low-level driver is being used.
.It Fa krp_callback
Callback called on completion of a keying operation.
.El
.Pp
.Fn crypto_kgetreq
allocates a
.Fa cryptkop
structure.
The first argument means the same as
.Fn crypto_getreq .
The second argument means flags passed to
.Fn pool_get .
.Pp
.Fn crypto_kfreereq
deallocates a structure
.Fa cryptkop
structure.
.Pp
The following sysctl entries exist to adjust
the behaviour of the system from userland:
.Bl -tag -width opencrypto.crypto_ret_kq.maxlen
.It kern.usercrypto
Allow (1) or forbid (0) userland access to
.Pa /dev/crypto .
.It kern.userasymcrypto
Allow (1) or forbid (0) userland access to
do asymmetric crypto requests.
.It kern.cryptodevallowsoft
Enable/disable access to hardware versus software operations:
.Bl -tag -width xxx
.It < 0
Force userlevel requests to use software operations, always.
.It = 0
Use hardware if present, grant userlevel requests for non-accelerated
operations (handling the latter in software).
.It > 0
Allow user requests only for operations which are hardware-accelerated.
.El
.It opencrypto.crypto_ret_q.maxlen
Limit the length of queue(crypto_ret_q) which mediates between
crypto driver's completion and calling
.Fa cryptop
callback.
When the queue exceeds this limit,
.Fn crypto_getreq
fails.
.Bl -tag -width xxxx
.It <= 0
means unlimited.
.El
.It opencrypto.crypto_ret_kq.maxlen
Limit the length of queue(crypto_ret_kq) which mediates between
crypto driver's completion and calling
.Fa cryptkop
callback.
When the queue exceeds this limit,
.Fn crypto_kgetreq
fails.
.Bl -tag -width xxxx
.It <= 0
means unlimited.
.El
.El
.Pp
.Bl -tag -width opencrypto.crypto_ret_kq.drops
The following sysctl entries exist to get statistics.
.It opencrypto.crypto_ret_q.len
Current crypto_ret_q length.
.It opencrypto.crypto_ret_q.drops
The count of
.Fn crypto_getreq
failed as overflow
.Pa opencrypto.crypto_ret_q.maxlen .
.It opencrypto.crypto_ret_kq.len
Current crypto_ret_kq length.
.It opencrypto.crypto_ret_kq.drops
The count of
.Fn crypto_kgetreq
failed as overflow
.Pa opencrypto.crypto_ret_kq.maxlen .
.El
.Sh DRIVER-SIDE API
The
.Fn crypto_get_driverid ,
.Fn crypto_register ,
.Fn crypto_kregister ,
.Fn crypto_unregister ,
.Fn crypto_unregister_all ,
and
.Fn crypto_done
routines are used by drivers that provide support for cryptographic
primitives to register and unregister with the kernel crypto services
framework.
Drivers must first use the
.Fn crypto_get_driverid
function to acquire a driver identifier, specifying the
.Fa flags
as an argument (normally 0, but software-only drivers should specify
.Dv CRYPTOCAP_F_SOFTWARE ) .
For each algorithm the driver supports, it must then call
.Fn crypto_register .
The first argument is the driver identifier.
The second argument is an array of
.Dv CRYPTO_ALGORITHM_MAX + 1
elements, indicating which algorithms are supported.
The last three arguments are pointers to three
driver-provided functions that the framework may call to establish new
cryptographic context with the driver, free already established
context, and ask for a request to be processed (encrypt, decrypt,
etc.)
.Fn crypto_unregister
is called by drivers that wish to withdraw support for an algorithm.
The two arguments are the driver and algorithm identifiers, respectively.
algorithms supported by the card.
If all algorithms associated with a driver are unregistered, the
driver will be disabled (no new sessions will be allocated on that
driver, and any existing sessions will be migrated to other drivers).
.Fn crypto_unregister_all
will unregister all registered algorithms, disable the driver,
and migrate existing sessions to other drivers.
.Pp
The calling convention for the three driver-supplied routines is:
.Bd -literal
int (*newsession) (void *, u_int32_t *, struct cryptoini *);
int (*freesession) (void *, u_int64_t);
int (*process) (void *, struct cryptop *, int);
.Ed
.Pp
On invocation, the first argument to
.Fn newsession
contains the driver identifier obtained via
.Fn crypto_get_driverid .
On successfully returning, it should contain a driver-specific session
identifier.
The second argument is identical to that of
.Fn crypto_newsession .
.Pp
The
.Fn freesession
routine takes as argument the SID (which is the concatenation of the
driver identifier and the driver-specific session identifier).
It should clear any context associated with the session (clear hardware
registers, memory, etc.).
.Pp
The
.Fn process
routine is invoked with a request to perform crypto processing.
This routine must not block, but should queue the request and return
immediately.
Upon processing the request, the callback routine should be invoked.
In case of error, the error indication must be placed in the
.Fa crp_etype
field of the
.Fa cryptop
structure.
The
.Fa hint
argument can be set to
.Dv CRYPTO_HINT_MORE
when there will be more request right after this request.
When the request is completed, or an error is detected, the
.Fn process
routine should invoke
.Fn crypto_done .
Session migration may be performed, as mentioned previously.
.Pp
The
.Fn kprocess
routine is invoked with a request to perform crypto key processing.
This routine must not block, but should queue the request and return
immediately.
Upon processing the request, the callback routine should be invoked.
In case of error, the error indication must be placed in the
.Fa krp_status
field of the
.Fa cryptkop
structure.
When the request is completed, or an error is detected, the
.Fn kprocess
routine should invoke
.Fn crypto_kdone .
.Sh RETURN VALUES
.Fn crypto_register ,
.Fn crypto_kregister ,
.Fn crypto_unregister ,
.Fn crypto_newsession ,
and
.Fn crypto_freesession
return 0 on success, or an error code on failure.
.Fn crypto_get_driverid
returns a non-negative value on error, and \-1 on failure.
.Fn crypto_getreq
returns a pointer to a
.Fa cryptop
structure and
.Dv NULL
on failure.
.Fn crypto_kgetreq
returns a pointer to a
.Fa cryptkop
structure and
.Dv NULL
on failure.
.Fn crypto_dispatch
returns
.Er EINVAL
if its argument or the callback function was
.Dv NULL ,
and 0 otherwise.
The callback is provided with an error code in case of failure, in the
.Fa crp_etype
field.
.Sh FILES
.Bl -tag -width sys/opencrypto/crypto.c
.It Pa sys/opencrypto/crypto.c
most of the framework code
.It Pa sys/crypto
crypto algorithm implementations
.El
.Sh SEE ALSO
.Xr ipsec 4 ,
.Xr pcmcia 4 ,
.Xr condvar 9 ,
.Xr malloc 9 ,
.Xr pool 9
.Rs
.%A "Angelos D. Keromytis"
.%A "Jason L. Wright"
.%A "Theo de Raadt"
.%T "The Design of the OpenBSD Cryptographic Framework"
.%I "Usenix"
.%N "2003"
.%D "June 2003"
.Re
.Sh HISTORY
The cryptographic framework first appeared in
.Ox 2.7
and was written by
.An Angelos D. Keromytis Aq Mt angelos@openbsd.org .
.Pp
.An Sam Leffler
ported the crypto framework to
.Fx
and made performance improvements.
.Pp
.An Jonathan Stone Aq Mt jonathan@NetBSD.org
ported the cryptoframe from
.Fx
to
.Nx .
.Nm opencrypto
first appeared in
.Nx 2.0 .
.Sh BUGS
The framework currently assumes that all the algorithms in a
.Fn crypto_newsession
operation must be available by the same driver.
If that's not the case, session initialization will fail.
.Pp
The framework also needs a mechanism for determining which driver is
best for a specific set of algorithms associated with a session.
Some type of benchmarking is in order here.
.Pp
Multiple instances of the same algorithm in the same session are not
supported.
Note that 3DES is considered one algorithm (and not three
instances of DES).
Thus, 3DES and DES could be mixed in the same request.
.Pp
A queue for completed operations should be implemented and processed
at some software
.Xr spl 9
level, to avoid overall system latency issues, and potential kernel
stack exhaustion while processing a callback.
.Pp
When SMP time comes, we will support use of a second processor (or
more) as a crypto device (this is actually AMP, but we need the same
basic support).