/* $NetBSD: hdlgreg.h,v 1.3 2012/01/21 19:44:29 nonaka Exp $ */
/*-
* Copyright (C) 2005, 2006 NONAKA Kimihiro <nonaka@netbsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _HDLGREG_H_
#define _HDLGREG_H_
/*
* Memory map and register definitions for I-O DATA HDL-G
*/
/*
* The memory map of I/O-DATA HDL-G looks like so:
*
* ------------------------------
* Intel 80321 IOP Reserved
* FFFF E900 ------------------------------
* Peripheral Memory Mapped
* Registers
* FFFF E000 ------------------------------
* On-board devices
* FE80 0000 ------------------------------
* SDRAM
* A000 0000 ------------------------------
* Reserved
* 9100 0000 ------------------------------
* Flash
* 9080 0000 ------------------------------
* Reserved
* 9002 0000 ------------------------------
* ATU Outbound Transaction
* Windows
* 8000 0000 ------------------------------
* ATU Outbound Direct
* Addressing Windows
* 0000 1000 ------------------------------
* Initialization Boot Code
* from Flash
* 0000 0000 ------------------------------
*/
/*
* We allocate a page table for VA 0xfe400000 (4MB) and map the
* PCI I/O space (64K) and i80321 memory-mapped registers (4K) there.
*/
#define HDLG_IOPXS_VBASE 0xfe400000UL
#define HDLG_IOW_VBASE HDLG_IOPXS_VBASE
#define HDLG_80321_VBASE (HDLG_IOW_VBASE + \
VERDE_OUT_XLATE_IO_WIN_SIZE)
/*
* The GIGALANDISK on-board devices are mapped VA==PA during bootstrap.
* Conveniently, the size of the on-board register space is 1 section
* mapping.
*/
#define HDLG_OBIO_BASE 0xfe800000UL
#define HDLG_OBIO_SIZE 0x00100000UL /* 1MB */
#define HDLG_UART1 0xfe800000UL /* TI 16550 */
#define HDLG_PLD 0xfe8d0000UL /* CPLD */
/*
* CPLD
*/
#define HDLG_LEDCTRL (HDLG_PLD + 0x00)
#define LEDCTRL_STAT_GREEN 0x01
#define LEDCTRL_STAT_RED 0x02
#define LEDCTRL_USB1 0x04
#define LEDCTRL_USB2 0x08
#define LEDCTRL_USB3 0x10
#define LEDCTRL_USB4 0x20
#define LEDCTRL_HDD 0x40
#define LEDCTRL_BUZZER 0x80
#define HDLG_PWRLEDCTRL (HDLG_PLD + 0x01)
#define PWRLEDCTRL_0 0x01
#define PWRLEDCTRL_1 0x02
#define PWRLEDCTRL_2 0x04
#define PWRLEDCTRL_3 0x08
#define HDLG_BTNSTAT (HDLG_PLD + 0x02)
#define BTNSTAT_POWER 0x01
#define BTNSTAT_SELECT 0x02
#define BTNSTAT_COPY 0x04
#define BTNSTAT_REMOVE 0x08
#define BTNSTAT_RESET 0x10
#define HDLG_INTEN (HDLG_PLD + 0x03)
#define INTEN_PWRSW 0x01
#define INTEN_BUTTON 0x02
#define INTEN_RTC 0x40
#define HDLG_PWRMNG (HDLG_PLD + 0x04)
#define PWRMNG_POWOFF 0x01
#define PWRMNG_RESET 0x02
#define HDLG_FANCTRL (HDLG_PLD + 0x06)
#define FANCTRL_OFF 0x00
#define FANCTRL_ON 0x01
#define hdlg_enable_pldintr(bit) \
do { \
*(volatile uint8_t *)HDLG_INTEN |= (bit); \
} while (/*CONSTCOND*/0)
#define hdlg_disable_pldintr(bit) \
do { \
*(volatile uint8_t *)HDLG_INTEN &= ~(bit); \
} while (/*CONSTCOND*/0)
#endif /* _HDLGREG_H_ */