# $NetBSD: INSTALL,v 1.64 2018/07/14 15:09:40 maxv Exp $
#
# First try for BeBox config file
#
include "arch/bebox/conf/std.bebox"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
maxusers 32
makeoptions COPTS="-Os" # Optimise for space. Implies -O2
# Enable the hooks used for initializing the root memory-disk.
options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # force root on memory disk
options MEMORY_DISK_SERVER=0 # no userspace memory disk support
options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode
#makeoptions DEBUG="-g"
#options DEBUG
#options DIAGNOSTIC
#options TRAP_PANICWAIT
#options DDB
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#options KTRACE
options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
#include "conf/compat_netbsd09.config"
#options COMPAT_386BSD_MBRPART # recognize old partition ID
# File systems
file-system FFS
#file-system EXT2FS
file-system MFS
file-system NFS
file-system CD9660
file-system MSDOSFS
#file-system FDESC
file-system KERNFS
#file-system NULLFS
#file-system PROCFS
#file-system UMAPFS
#file-system UNION
file-system PTYFS # /dev/pts/N support
#file-system TMPFS
# Filesystem options
#options DISKLABEL_EI # disklabel Endian Independent support
#options FFS_EI # FFS Endian Independent support
options NFS_V2_ONLY # Exclude NFS3 code to save space
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options WAPBL # File system journaling support
#options NFSSERVER
options INET
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# wscons options
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
options WS_DEFAULT_FG=WSCOL_LIGHT_WHITE
# compatibility to other console drivers
options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
config netbsd root on ? type ffs
#
# device
#
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
#options PCIVERBOSE # verbose PCI device messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
mainbus0 at root
cpu* at mainbus0
pci0 at mainbus0 bus ?
#ppb* at pci? dev ? function ? # PCI-PCI bridges
#pci* at ppb? bus ?
pchb* at pci? dev ? function ? # PCI-Host bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
isa* at pcib? # ISA on PCI-ISA bridge
# Console Devices
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
#pms* at pckbc? # PS/2 mouse for wsmouse
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
#options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads
genfb* at pci? dev ? function ?
options WSFB_FAKE_VGA_FB
vga* at pci? dev ? function ?
wsdisplay* at vga? console ?
wskbd* at pckbd? console ?
#wsmouse* at pms? mux 0
# make sure the console display is always wsdisplay0
wsdisplay0 at wsemuldisplaydev? console 1
wsdisplay* at wsemuldisplaydev?
com0 at isa? port 0x3f8 irq 4 # standard PC serial ports
com1 at isa? port 0x2f8 irq 3
#com2 at isa? port 0x380 irq 16
#com3 at isa? port 0x388 irq 17
#lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
mcclock0 at isa? port 0x70 # time-of-day clock
attimer0 at isa?
siop* at pci? dev ? function ? # NCR 538XX SCSI controllers
scsibus* at siop?
sd* at scsibus? target ? lun ? # SCSI disk drives
#st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd0 at fdc? drive 1
#fd* at fdc? drive ?
wdc0 at isa? port 0x1f0 irq 14 # ST506, ESDI, and IDE controllers
atabus* at ata?
wd* at atabus? drive ?
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Network devices
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
ne0 at isa? port 0x300 irq 5 # NE[12]000 ethernet cards
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
# MII/PHY support
ukphy* at mii? phy ? # generic unknown PHYs
#wss0 at isa? port 0x530 irq 10 drq 0 # Windows Sound System
#spkr* at pcppi?
# Joystick driver. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
#pseudo-device vnd
#pseudo-device fss # file system snapshot device
pseudo-device md
pseudo-device loop
#pseudo-device bpfilter # packet filter
pseudo-device pty # pseudo-terminals