/* $NetBSD: swarm.h,v 1.1.1.1 2017/07/24 09:21:50 mrg Exp $ */ /* * I/O Address assignments for the CSWARM board * * Summary of address map: * * Address Size CSel Description * --------------- ---- ------ -------------------------------- * 0x1FC00000 2MB CS0 Boot ROM * 0x1F800000 2MB CS1 Alternate boot ROM * CS2 Unused * 0x100A0000 64KB CS3 LED display * 0x100B0000 64KB CS4 IDE Disk * CS5 Unused * 0x11000000 64MB CS6 PCMCIA * CS7 Unused * * GPIO assignments * * GPIO# Direction Description * ------- --------- ------------------------------------------ * GPIO0 Output Debug LED * GPIO1 Output Sturgeon NMI * GPIO2 Input PHY Interrupt (interrupt) * GPIO3 Input Nonmaskable Interrupt (interrupt) * GPIO4 Input IDE Disk Interrupt (interrupt) * GPIO5 Input Temperature Sensor Alert (interrupt) * GPIO6 N/A PCMCIA interface * GPIO7 N/A PCMCIA interface * GPIO8 N/A PCMCIA interface * GPIO9 N/A PCMCIA interface * GPIO10 N/A PCMCIA interface * GPIO11 N/A PCMCIA interface * GPIO12 N/A PCMCIA interface * GPIO13 N/A PCMCIA interface * GPIO14 N/A PCMCIA interface * GPIO15 N/A PCMCIA interface */ /* GPIO pins */ #define GPIO_DEBUG_LED 0 #define GPIO_STURGEON_NMI 1 #define GPIO_PHY_INTERRUPT 2 #define GPIO_NONMASKABLE_INT 3 #define GPIO_IDE_INTERRUPT 4 #define GPIO_TEMP_SENSOR_INT 5 /* device addresses */ #define SWARM_LEDS_PHYS 0x100a0000 #define SWARM_IDE_PHYS 0x100b0000 #define SWARM_PCMCIA_PHYS 0x11000000 /* SMBus devices */ #define TEMPSENSOR_SMBUS_CHAN 0 #define TEMPSENSOR_SMBUS_DEV 0x2A #define DRAM_SMBUS_CHAN 0 #define DRAM_SMBUS_DEV 0x54 #define BIGEEPROM_SMBUS_CHAN 0 #define BIGEEPROM_SMBUS_DEV 0x50 #define BIGEEPROM_SMBUS_CHAN_1 1 /* rev 2.0 swarm only */ #define BIGEEPROM_SMBUS_DEV_1 0x51 #define CFG_DRAM_SMBUS_CHAN 0 #define CFG_DRAM_SMBUS_BASE 0x54 /* starting SMBus device base */ #define X1241_SMBUS_CHAN 1 /* rev 1.0 swarm only, fixed slave address */ #define M41T81_SMBUS_CHAN 1 /* rev 2.0 swarm only (or PCF8563), fixed slave address */ #define PCF8563_SMBUS_CHAN 1 /* rev 2.0 swarm only (or M41T81) */ #define PCF8563_SMBUS_DEV 0x50 #define MAX1617A_SMBUS_CHAN 0 /* or MAX6654 on newer board, reg compatible */ #define MAX1617A_SMBUS_DEV 0x2a |