/* $NetBSD: sbd_tr2.h,v 1.2 2008/04/28 20:23:18 martin Exp $ */
/*-
* Copyright (c) 2004 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by UCHIYAMA Yasushi.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SBD_TR2_PRIVATE
#error "Don't inlucde this file except for TR2 implemetation"
#endif /* !_SBD_TR2_PRIVATE */
#ifndef _EWS4800MIPS_SBD_TR2_H_
#define _EWS4800MIPS_SBD_TR2_H_
/*
* EWS4800/350 (TR2) specific system board definition
*/
/* ROM */
#define TR2_ROM_FONT_ADDR 0xbfc0ec00
#define TR2_ROM_FONT_SIZE ((0x7f - 0x20) * 24 * sizeof(int16_t))
#define TR2_ROM_KEYMAP_NORMAL ((uint8_t *)0xbfc12d6c)
#define TR2_ROM_KEYMAP_SHIFTED ((uint8_t *)0xbfc12dec)
#define TR2_ROM_KEYMAP_CONTROL ((uint8_t *)0xbfc12e6c)
#define TR2_ROM_KEYMAP_CAPSLOCK ((uint8_t *)0xbfc12eec)
#define TR2_ROM_KBD_TYPE 0xbfc0fe04 /* [d0 00 00 01] used by kbmskbreset. */
#define TR2_ROM_PUTC ((void (*)(int, int, int))0xbfc04f28)
#define TR2_ROM_GETC ((int (*)(void))0xbfc11fa0)
/* System board I/O devices */
#define TR2_PICNIC_ADDR 0xbb000000
#define TR2_KBMS_ADDR 0xbb010000
#define TR2_SIO_ADDR 0xbb011000
#define TR2_NVSRAM_ADDR 0xbb020000
#define TR2_NVSRAM_SIZE 0x00004000
#define TR2_FDC_ADDR 0xbb030000
#define TR2_LPT_ADDR 0xbb040000
#define TR2_SCSI_ADDR 0xbb050000
#define TR2_ETHER_ADDR 0xbb060000
#define TR2_MEMC_ADDR 0xbfa00000
#define TR2_NABI_ADDR 0xbfb00000
#define TR2_GAFB_ADDR 0xf0000000
#define TR2_GAFB_SIZE 0x08000000
#define TR2_GACTRL_ADDR 0xf5f00000
#define TR2_GACTRL_SIZE 0x1000
#define SOFTRESET_REG ((volatile uint32_t *)0xbfb00000)
#define POWEROFF_REG ((volatile uint8_t *)0xbb004000)
#define UPS_STATUS_REG ((volatile uint8_t *)0xbb004008) /* mask 0xffffffbb, 0x4 */
#define LED_TF_REG ((volatile uint8_t *)0xbb006000) /* 0/1 (Red)*/
#define TF_ERROR_CODE ((volatile uint8_t *)0xbb006004) /* 1-255 */
#define BUZZER_REG ((volatile uint8_t *)0xbb007000)
/* NABI */
#define NABI0_CTRL_REG ((volatile uint32_t *)0xbfb00000)
#define NABI1_CTRL_REG ((volatile uint32_t *)0xbfb00004)
#define NABI2_CTRL_REG ((volatile uint32_t *)0xbfb00008)
#define NABI0_INTR_REG ((volatile uint32_t *)0xbfb00010)
#define NABI1_INTR_REG ((volatile uint32_t *)0xbfb00018) /* VME */
#define NABI2_INTR_REG ((volatile uint32_t *)0xbfb0001c)
/*
* PICNIC (interrupt controller)
*/
#define PICNIC_INT0_STATUS_REG ((volatile uint8_t *)0xbb000000)
#define PICNIC_INT2_STATUS_REG ((volatile uint8_t *)0xbb000004)
#define PICNIC_INT4_STATUS_REG ((volatile uint8_t *)0xbb000008)
#define PICNIC_INT5_STATUS_REG ((volatile uint8_t *)0xbb000010)
#define PICNIC_NMI_REG ((volatile uint8_t *)0xbb000014)
#define PICNIC_INT0_MASK_REG ((volatile uint8_t *)0xbb001000)
#define PICNIC_INT2_MASK_REG ((volatile uint8_t *)0xbb001004)
#define PICNIC_INT4_MASK_REG ((volatile uint8_t *)0xbb001008)
#define PICNIC_INT5_MASK_REG ((volatile uint8_t *)0xbb001010)
/* Interrupt source */
#define PICNIC_INT_FDDLPT 0x80
#define PICNIC_INT_ETHER 0x40
#define PICNIC_INT_SCSI 0x20
#define PICNIC_INT_SERIAL 0x04
#define PICNIC_INT_KBMS 0x01
#define PICNIC_INT_CLOCK 0x01
/*
* 76543210
* ||| | +-- keyboard, mouse
* ||| +-----serial
* ||+--------SCSI
* |+---------ether
* +----------FDC, printer
*0xbb00 UX IPL mips int
* 1000 0x80 0x00 7 INT0
* 1004 0x60 0x00 65 INT2
* 1008 0x05 0x00 2 0 INT4
* 1010 0x01 0x01 0 Clock INT5
*/
/* SIO0 Z85C30 */
#define KBD_STATUS ((volatile uint8_t *)0xbb010000)
#define KBD_DATA ((volatile uint8_t *)0xbb010004)
#define MOUSE_STATUS ((volatile uint8_t *)0xbb010008)
#define MOUSE_DATA ((volatile uint8_t *)0xbb01000c)
/* SIO1 Z85C30 */
#define SIOA_STATUS ((volatile uint8_t *)0xbb011008)
#define SIOA_RDATA ((volatile uint8_t *)0xbb01100c)
#define SIOB_STATUS ((volatile uint8_t *)0xbb011000)
#define SIOB_RDATA ((volatile uint8_t *)0xbb011004)
/* ETHER i82589 */
/* read operation invokes channel attention. */
#define ETHER_SETADDR_REG ((volatile uint32_t *)0xbb060000)
/* DCC (DMA controler. Parallel port and FDD use this.) */
struct DCC {
uint32_t addr; /* DMA address */
uint32_t cnt; /* transfer count */
uint32_t ctrl; /* DMA status/command */
uint32_t drm;
} __attribute__((__packed__));
/* FDD uPD72065 (80track ready) */
#define FDC_DMA ((volatile struct DCC *)0xbb030000)
#define FDC_STATUS ((volatile uint8_t *)0xbb030010)
#define FDC_DATA ((volatile uint8_t *)0xbb030014)
/* LPT */
#define LPT_DMA (((volatile struct DCC *)0xbb040000)
#define LPT_COUNT ((volatile uint8_t *)0xbb040010)
#define LPT_STRR ((volatile uint8_t *)0xbb040011)
/* NVSRAM MK48T08B-15 (word aligned byte access) */
/* 0, 4, 8, c */
#define NVSRAM_SIGNATURE 0xbb020000
/* 10, 14 18 1c */
#define NVSRAM_MACHINEID 0xbb020010
#define NVSRAM_ETHERADDR ((uint8_t *)0xbb021008)
/* 2000, 2004, 2008, 200c */
#define NVSRAM_CDUMP_ADDR ((uint8_t *)0xbb022000)
#define NVSRAM_DUMPDEV_1XXX 0xbb022020
#define NVSRAM_DUMPDEV_2XXX 0xbb022040
/* 2050, 2054, 2058, 205c */
#define NVSRAM_TF_SCRATCH_ADDR 0xbb022050
#if 0
/* kbd */
#define NVSRAM_KBD??? 0xbb0220a0 /* 0x90 */
#endif
#define NVSRAM_TF_TESTDATA1 0xbb023000
#define NVSRAM_TF_TESTDATA2 0xbb023004
#define NVSRAM_KEYMAP ((uint8_t *)0xbb023014) /* scratch */
#define NVSRAM_TF_PROGRESS ((uint8_t *)0xbb02301c)
#define NVSRAM_BEV_ROM 32 /* Exception from ROM routine */
#define NVSRAM_KBDCONNECT ((uint8_t *)0xbb023010)
#define HAS_KBD() (*NVSRAM_KBDCONNECT != 255)
#define NVSRAM_CONSTYPE ((uint8_t *)0xbb023020)
#define IS_FBCONS() (*NVSRAM_CONSTYPE == 0)
#define NVSRAM_GA 0xbb023008
#define HAS_GA 0
#define NVSRAM_TF_RESULT_HI 0xbb023024
#define NVSRAM_TF_RESULT_LO 0xbb023028
#define NVSRAM_IPLMODE ((uint8_t *)0xbb02302c)
/*
* 0: Normal mode
* 1: ERROR continue mode
* 2: Details mode
* 3: LOOP mode
*/
#define NVSRAM_BOOTDEV ((uint8_t *)0xbb023030)
#define NVSRAM_BOOTUNIT ((uint8_t *)0xbb023034)
/* V1 is memory area information */
#define NVSRAM_1STBOOT_ARG_V1_3 ((uint8_t *)0xbb023048) /* 24-31 */
#define NVSRAM_1STBOOT_ARG_V1_2 ((uint8_t *)0xbb02304c) /* 16-23 */
#define NVSRAM_1STBOOT_ARG_V1_1 ((uint8_t *)0xbb023050) /* 8 -15 */
#define NVSRAM_1STBOOT_ARG_V1_0 ((uint8_t *)0xbb023054) /* 0 - 7 */
#define NVSRAM_1STBOOT_ARG_V0 ((uint8_t *)0xbb023058)
#define NVSRAM_SIMM_3_2 ((uint8_t *)0xbb023050)
#define NVSRAM_SIMM_1_0 ((uint8_t *)0xbb023054)
#define SIMM_16M 0x1
#define SIMM_32M 0x2
#define NVSRAM_RTCADDR ((uint8_t *)0xbb027fe0)
/* Graphic adapter */
#include <machine/gareg.h>
/*
* VME (350/380)
*/
#define VME_ADDR 0xf8000000
#define VME_32_ADDR 0xf8000000
#define VME_32_SIZE 0x07000000
#define VME_BUFFER_ADDR 0xff000000
#define VME_BUFFER_SIZE 0x00800000
#define VME_24_ADDR 0xff800000
#define VME_24_SIZE 0x007f0000
#define VME_SHORTIO_ADDR 0xffff0000
#define VME_SHORTIO_SIZE 0x00010000
#endif /* !_EWS4800MIPS_SBD_TR2_H_ */