# $NetBSD: INSTALL_SMALL,v 1.18 2017/09/14 07:58:43 mrg Exp $
#
# INSTALL -- Installation kernel
#
include "arch/prep/conf/std.prep"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
makeoptions COPTS="-Os" # Reduce size.
# Enable the hooks used for initializing the ram-disk.
options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # Force root on ram-disk
options MEMORY_DISK_ROOT_SIZE=4096 # 2mb
options MEMORY_DISK_SERVER=0 # don't need for install
options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode
maxusers 8
# Platform support
options PIC_OPENPIC # OpenPIC support (7043-140)
options PIC_PREPIVR
options PIC_I8259
# Compatibility options
#include "conf/compat_netbsd20.config"
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
no options EXEC_AOUT # no a.out support
# File systems
file-system FFS # UFS
#file-system EXT2FS # second extended file system (linux)
file-system MFS # memory file system
file-system NFS # Network File System client
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
#file-system PTYFS # /dev/pts/N support
# File system options
#options DISKLABEL_EI # disklabel Endian Independent support
#options FFS_EI # FFS Endian Independent support
options FFS_NO_SNAPSHOT # No FFS snapshot support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
options WAPBL # File system journaling support
#options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
options NFS_V2_ONLY # Exclude NFS3 code to save space
# Networking options
options INET # IP + ICMP + TCP + UDP
#options NFS_BOOT_BOOTPARAM
#options NFS_BOOT_DHCP
#
# wscons options
#
# builtin terminal emulations
options WSEMUL_VT100 # VT100 / VT220 emulation
options WSDISPLAY_DEFAULTSCREENS=1
#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#
# Device configuration
#
mainbus0 at root
cpu0 at mainbus0
# Basic Bus Support
# PCI bus support
pci0 at mainbus0 bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
# EISA bus support
eisa* at pceb?
# ISA bus support
isa* at pcib? # ISA on PCI-ISA bridge
isa* at pceb?
# PCMCIA bus support
#pcmcia* at pcic? controller ? socket ?
# ISA PCMCIA controllers
#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#options PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14
#options PCIC_ISA_ALLOC_IOBASE=0x0400
#options PCIC_ISA_ALLOC_IOSIZE=0x0100
# ISA Plug-and-Play bus support
#isapnp0 at isa?
# PNP bus device for attaching objects descibed in the residual
pnpbus0 at mainbus0
# Console Devices
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
#pms* at pckbc? # PS/2 mouse for wsmouse
vga* at pci?
wsdisplay* at vga? console ?
wskbd* at pckbd? console ?
#wsmouse* at pms? mux 0
mcclock* at pnpbus? # mc146818 and compatible
mkclock* at pnpbus? # mk48t18 and compatible
nvram* at pnpbus?
# Serial Devices
# ISA serial interfaces
com0 at isa? port 0x3f8 irq 4 # standard PC serial ports
com1 at isa? port 0x2f8 irq 3
# Parallel Printer Interfaces
# ISA parallel printer interfaces
#lpt0 at isa? port 0x3bc irq 7 # standard PC parallel ports
# SCSI Controllers and Devices
# PCI SCSI controllers
#adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
#esiop* at pci? dev ? function ? # Symbios 53c825/875 and newer chips
#iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
# PCMCIA SCSI controllers
#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
# SCSI bus support
#scsibus* at adw?
#scsibus* at ahc?
#scsibus* at aic?
#scsibus* at esiop?
#scsibus* at iha?
#scsibus* at pcscp?
scsibus* at siop?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
#st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
# IDE and related devices
# IDE controller found on most Power Personal machines
wdc* at pnpbus?
# PCMCIA IDE controllers
#wdc* at pcmcia? function ?
# ATA (IDE) bus support
atabus* at ata?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
# Miscellaneous mass storage devices
# ISA floppy
#fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fd* at fdc? drive ?
# Network Interfaces
# PCI network interfaces
#ep* at pci? dev ? function ? # 3Com 3c59x
#ex* at pci? dev ? function ? # 3Com 3c90x[BC]
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
#rtk* at pci? dev ? function ? # Realtek 8129/8139
#sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
# ISA network interfaces
#ep* at isa? port ? irq ? # 3Com 3c509 Ethernet
we1 at isa? port 0x300 iomem 0xe4000 irq 11 # WD/SMC Ethernet
# ISA Plug-and-Play network intefaces
#ep* at isapnp? # 3Com 3c509 Ethernet
#ne* at isapnp? # NE2000-compatible Ethernet
# PCMCIA network interfaces
#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
#ne* at pcmcia? function ? # NE2000-compatible Ethernet
# MII/PHY support
#exphy* at mii? phy ? # 3Com internal PHYs
#inphy* at mii? phy ? # Intel 82555 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# Pull in optional local configuration
include "arch/prep/conf/INSTALL.local"
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device md # memory disk device (ramdisk)
#pseudo-device fss # file system snapshot device
# network pseudo-devices
pseudo-device loop # network loopback
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
options NO_DEV_PTM
#options RND_COM # use "com" randomness as well