/* $NetBSD: mscpvar.h,v 1.18 2012/10/27 17:18:27 chs Exp $ */
/*
* Copyright (c) 1988 Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Chris Torek.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)mscpvar.h 7.3 (Berkeley) 6/28/90
*/
/*
* Copyright (c) 1996 Ludd, University of Lule}, Sweden.
*
* This code is derived from software contributed to Berkeley by
* Chris Torek.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)mscpvar.h 7.3 (Berkeley) 6/28/90
*/
/*
* MSCP generic driver configuration
*/
/*
* Enabling MSCP_PARANOIA makes the response code perform various checks
* on the hardware. (Right now it verifies only the buffer pointer in
* mscp_cmdref.)
*
* Enabling AVOID_EMULEX_BUG selects an alternative method of identifying
* transfers in progress, which gets around a rather peculiar bug in the
* SC41/MS. Enabling MSCP_PARANOIA instead should work, but will cause
* `extra' Unibus resets.
*
* Either of these flags can simply be included as an `options' line in
* your configuration file.
*/
/* #define MSCP_PARANOIA */
/* #define AVOID_EMULEX_BUG */
/*
* Ring information, per ring (one each for commands and responses).
*/
struct mscp_ri {
int mri_size; /* ring size */
int mri_next; /* next (expected|free) */
long *mri_desc; /* base address of descriptors */
struct mscp *mri_ring; /* base address of packets */
};
/*
* Transfer info, one per command packet.
*/
struct mscp_xi {
bus_dmamap_t mxi_dmam; /* Allocated DMA map for this entry */
struct buf * mxi_bp; /* Buffer used in this command */
struct mscp * mxi_mp; /* Packet used in this command */
int mxi_inuse;
};
struct mscp_ctlr {
void (*mc_ctlrdone) /* controller operation complete */
(device_t);
void (*mc_go) /* device-specific start routine */
(device_t, struct mscp_xi *);
void (*mc_saerror) /* ctlr error handling */
(device_t, int);
};
struct mscp_softc;
struct mscp_device {
void (*me_dgram) /* error datagram */
(device_t, struct mscp *, struct mscp_softc *);
void (*me_iodone) /* normal I/O is done */
(device_t, struct buf *);
int (*me_online) /* drive on line */
(device_t, struct mscp *);
int (*me_gotstatus) /* got unit status */
(device_t, struct mscp *);
void (*me_replace) /* replace done */
(device_t, struct mscp *);
int (*me_ioerr) /* read or write failed */
(device_t, struct mscp *, struct buf *);
void (*me_bb) /* B_BAD io done */
(device_t, struct mscp *, struct buf *);
void (*me_fillin) /* Fill in mscp info for this drive */
(struct buf *,struct mscp *);
void (*me_cmddone) /* Non-data transfer operation is done */
(device_t, struct mscp *);
};
/*
* This struct is used when attaching a mscpbus.
*/
struct mscp_attach_args {
struct mscp_ctlr *ma_mc; /* Pointer to ctlr's mscp_ctlr */
int ma_type; /* disk/tape bus type */
struct mscp_pack *ma_uda; /* comm area virtual */
struct mscp_softc **ma_softc; /* backpointer to bus softc */
bus_dmamap_t ma_dmam; /* This comm area dma info */
bus_dma_tag_t ma_dmat;
bus_space_tag_t ma_iot;
bus_space_handle_t ma_iph; /* initialisation and polling */
bus_space_handle_t ma_sah; /* status & address (read part) */
bus_space_handle_t ma_swh; /* status & address (write part) */
short ma_ivec; /* Interrupt vector to use */
char ma_ctlrnr; /* Phys ctlr nr */
char ma_adapnr; /* Phys adapter nr */
};
#define MSCPBUS_DISK 001 /* Bus is used for disk mounts */
#define MSCPBUS_TAPE 002 /* Bus is used for tape mounts */
#define MSCPBUS_UDA 004 /* ctlr is disk on unibus/qbus */
#define MSCPBUS_KDB 010 /* ctlr is disk on BI */
#define MSCPBUS_KLE 020 /* ctlr is tape on unibus/qbus */
/*
* Used when going for child devices.
*/
struct drive_attach_args {
struct mscp *da_mp; /* this devices response struct */
int da_typ; /* Parent of type */
};
/*
* Return values from functions.
* MSCP_RESTARTED is peculiar to I/O errors.
*/
#define MSCP_DONE 0 /* all ok */
#define MSCP_FAILED 1 /* no go */
#define MSCP_RESTARTED 2 /* transfer restarted */
/* Work item for autoconf setup */
struct mscp_work {
struct work mw_work;
struct mscp_softc *mw_mi;
struct mscp mw_mp;
SLIST_ENTRY(mscp_work) mw_list;
};
/*
* Per device information.
*
* mi_ip is a pointer to the inverting pointers (things that get `ui's
* given unit numbers) FOR THIS CONTROLLER (NOT the whole set!).
*
* b_actf holds a queue of those transfers that were started but have
* not yet finished. Other Unibus drivers do not need this as they hand
* out requests one at a time. MSCP devices, however, take a slew of
* requests and pick their own order to execute them. This means that
* we have to have a place to move transfers that were given to the
* controller, so we can tell those apart from those that have not yet
* been handed out; b_actf is that place.
*/
struct mscp_softc {
device_t mi_dev; /* Autoconf stuff */
struct mscp_ri mi_cmd; /* MSCP command ring info */
struct mscp_ri mi_rsp; /* MSCP response ring info */
bus_dma_tag_t mi_dmat;
bus_dmamap_t mi_dmam;
struct mscp_xi mi_xi[NCMD];
int mi_mxiuse; /* Bitfield of inuse mxi packets */
short mi_credits; /* transfer credits */
char mi_wantcmd; /* waiting for command packet */
char mi_wantcredits; /* waiting for transfer credits */
struct mscp_ctlr *mi_mc; /* Pointer to parent's mscp_ctlr */
struct mscp_device *mi_me; /* Pointer to child's mscp_device */
device_t *mi_dp; /* array of backpointers */
int mi_driveno; /* Max physical drive number found */
char mi_ctlrnr; /* Phys ctlr nr */
char mi_adapnr; /* Phys adapter nr */
int mi_flags;
struct mscp_pack *mi_uda; /* virtual address */
int mi_type;
short mi_ivec; /* Interrupt vector to use */
short mi_ierr; /* Init err counter */
bus_space_tag_t mi_iot;
bus_space_handle_t mi_iph; /* initialisation and polling */
bus_space_handle_t mi_sah; /* status & address (read part) */
bus_space_handle_t mi_swh; /* status & address (write part) */
struct bufq_state *mi_resq; /* While waiting for packets */
struct workqueue *mi_wq; /* Autoconf workqueue */
kmutex_t mi_mtx; /* Freelist mutex */
SLIST_HEAD(, mscp_work) mi_freelist; /* Work item freelist */
};
/* mi_flags */
#define MSC_STARTPOLL 1
#define MSC_INSTART 2
#define MSC_IGNOREINTR 4
#define MSC_READY 8
/*
* We have run out of credits when mi_credits is <= MSCP_MINCREDITS.
* It is still possible to issue one command in this case, but it must
* not be a data transfer. E.g., `get command status' or `abort command'
* is legal, while `read' is not.
*/
#define MSCP_MINCREDITS 1
/*
* Flags for mscp_getcp().
*/
#define MSCP_WAIT 1
#define MSCP_DONTWAIT 0
/* get a command packet */
/*
* Unit flags
*/
#define UNIT_ONLINE 0x01 /* drive is on line */
#define UNIT_HAVESTATUS 0x02 /* got unit status */
#define UNIT_REQUEUE 0x04 /* requeue after response */
/*
* Handle a command ring transition: wake up sleepers for command packets.
* This is too simple to bother with a function call.
*/
#define MSCP_DOCMD(mi) { \
if ((mi)->mi_wantcmd) { \
(mi)->mi_wantcmd = 0; \
wakeup((void *) &(mi)->mi_wantcmd); \
} \
}
/* Prototypes */
struct mscp *mscp_getcp(struct mscp_softc *, int);
void mscp_printevent(struct mscp *);
void mscp_go(struct mscp_softc *, struct mscp *, int);
void mscp_requeue(struct mscp_softc *);
void mscp_dorsp(struct mscp_softc *);
int mscp_decodeerror(const char *, struct mscp *, struct mscp_softc *);
int mscp_print(void *, const char *);
void mscp_hexdump(struct mscp *);
void mscp_strategy(struct buf *, device_t);
void mscp_printtype(int, int);
int mscp_waitstep(struct mscp_softc *, int, int);
void mscp_dgo(struct mscp_softc *, struct mscp_xi *);
void mscp_intr(struct mscp_softc *);
void mscp_worker(struct work *, void *);