########################################################################
#
# Copyright (c) 2009-2011, Secure Endpoints Inc.
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# 
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in
#   the documentation and/or other materials provided with the
#   distribution.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
# 

all::

clean::

test::

prep::

all:: prep

!include <Win32.Mak>

!ifdef NODEBUG
BUILD=rel
!else
BUILD=dbg
!endif

!if exist($(MAKEDIR)\windows\NTMakefile.w32)
SRC=$(MAKEDIR)
!elseif exist($(MAKEDIR)\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..
!elseif exist($(MAKEDIR)\..\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..\..
!elseif exist($(MAKEDIR)\..\..\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..\..\..
!elseif exist($(MAKEDIR)\..\..\..\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..\..\..\..
!else
!  error Cant determine source directory
!endif

!  if "$(CPU)"=="i386" || "$(CPU)"=="x86"
MCPU=x86
!  elseif "$(CPU)"=="AMD64"
MCPU=amd64
!  else
!    error Unknown CPU
!  endif

!include "NTMakefile.config"

#----------------------------------------------------------------
# Directory macros

DESTDIR		=$(SRC)\out\dest_$(CPU)
OBJDIR		=$(SRC)\out\obj_$(CPU)

INCDIR		=$(DESTDIR)\inc
LIBDIR		=$(DESTDIR)\lib
BINDIR		=$(DESTDIR)\bin
PLUGINDIR	=$(BINDIR)
DOCDIR		=$(DESTDIR)\doc
SBINDIR		=$(BINDIR)
LIBEXECDIR	=$(BINDIR)
ASMDIR		=$(BINDIR)
INSTDIR		=$(DESTDIR)\install
SDKDIR		=$(SRC)\out\sdk
SDKINCDIR	=$(SDKDIR)\inc
SDKLIBDIR	=$(SDKDIR)\lib\$(CPU)
SDKSRCDIR	=$(SDKDIR)\src
SDKREDISTDIR	=$(SDKDIR)\redist\$(CPU)

!ifdef RELDIR
SRCDIR =$(SRC)\$(RELDIR)
OBJ    =$(OBJDIR)\$(RELDIR)
!else
OBJ    =$(OBJDIR)
!endif

# For tests:
PATH=$(PATH);$(BINDIR)

#----------------------------------------------------------------
# Command macros

RMAKE=nmake /nologo /f NTMakefile RECURSE=1
MKDIR=md
CP=copy /Y
LINK=link
LM=lib
RM=del /q
ECHO=echo
RC=rc

#----------------------------------------------------------------
# Program macros

AWK_CMD=gawk.exe
YACC_CMD=bison.exe
LEX_CMD=flex.exe
PYTHON=python.exe
PERL=perl.exe
CMP=cmp.exe
MAKECAT=makecat.exe
HHC=hhc.exe
MAKEINFO=makeinfo.exe
SED=sed.exe

CANDLE_CMD=candle.exe
LIGHT_CMD=light.exe

# Only used for tests
SH=sh.exe

# Commands
AWK=$(AWK_CMD)
YACC=$(YACC_CMD) -y
LEX=$(LEX_CMD)
CANDLE=$(CANDLE_CMD) -nologo
LIGHT=$(LIGHT_CMD) -nologo

#----------------------------------------------------------------
# External dependencies

# For pthread support to be enabled, both PTHREAD_INC and PTHREAD_LIB
# should be defined.  PTHREAD_INC should be the include directory
# where pthread.h is to be found (i.e. $(PTHREAD_INC)\pthread.h should
# exist), and PTHREAD_LIB is the full path to the pthread import
# library.
#
# Note that both paths should not contain any whitespace.

!ifdef PTHREAD_INC
pthreadinc= -I$(PTHREAD_INC)
!endif

#----------------------------------------------------------------
# Build options

cincdirs=$(cincdirs) -I$(INCDIR) -I$(INCDIR)\krb5 $(pthreadinc)
cdefines=$(cdefines) -DHAVE_CONFIG_H
# Windows CNG provider
cdefines=$(cdefines) -DHCRYPTO_DEF_PROVIDER=w32crypto
cdebug=$(cdebug) /Zi
ldebug=$(ldebug) /DEBUG
localcflags=$(localcflags) /Oy-

# Disable warnings:
#
# C4996: 'function' was declared deprecated
# C4127: Conditional expression is constant
# C4244: Conversion from 'type1' to 'type2', possible loss of data
# C4100: 'identifier': unreferenced formal parameter
# C4706: Assignment within conditional expression
# C4214: Nonstandard extension used
# C4267: '': Conversion from 'type1' to 'type2', possible loss of data
# C4018: '': Signed/unsigned mismatch
# C4204: Nonstandard extension used: non-constant aggregate initializer
# C4221: Nonstandard extension used: 'v1': cannot be initialized using address of automatic variable 'v2'
# C4295: '': Array is too small to include a terminating null character
# C4146: Unary minus operator applied to unsigned type, result still unsigned.
#
cwarn=$(cwarn) -D_CRT_SECURE_NO_WARNINGS -wd4996 -wd4127 -wd4244 -wd4100 -wd4706
cwarn=$(cwarn) -wd4214 -wd4267 -wd4018 -wd4389 -wd4204 -wd4221 -wd4295 -wd4146

!if "$(CPU)"=="i386"
libmach=/machine:X86
!elseif "$(CPU)"=="AMD64"
libmach=/machine:X64
!else
!  error Unknown CPU value
!endif

!ifdef NO_MP
MPOPT=
!else
MPOPT=/MP
!endif

!ifndef STATICRUNTIME

C2OBJ_C = $(CC) $(cdebug) $(cflags) $(cvarsdll) $(AUXCFLAGS) $(intcflags) $(cdefines) $(cincdirs) $(cwarn)
EXECONLINK_C = $(LINK) $(ldebug) $(conlflags) $(conlibsdll) $(libmach)
EXEGUILINK_C = $(LINK) $(ldebug) $(guilflags) $(guilibsdll) $(libmach)
DLLCONLINK_C = $(LINK) $(ldebug) $(dlllflags) $(conlibsdll) $(libmach)
DLLGUILINK_C = $(LINK) $(ldebug) $(dlllflags) $(guilibsdll) $(libmach)

!else # STATICRUNTIME

C2OBJ_C = $(CC) $(cdebug) $(cflags) $(cvarsmt) $(AUXCFLAGS) $(intcflags) $(cdefines) $(cincdirs) $(cwarn)
EXECONLINK_C = $(LINK) $(ldebug) $(conlflags) $(conlibsmt) $(libmach)
EXEGUILINK_C = $(LINK) $(ldebug) $(guilflags) $(guilibsmt) $(libmach)
DLLCONLINK_C = $(LINK) $(ldebug) $(dlllflags) $(conlibsmt) $(libmach)
DLLGUILINK_C = $(LINK) $(ldebug) $(dlllflags) $(guilibsmt) $(libmach)

!endif

LIBGUI_C = $(LM) /nologo $(libmach) /SUBSYSTEM:WINDOWS
LIBCON_C = $(LM) /nologo $(libmach) /SUBSYSTEM:CONSOLE

C2OBJ = $(C2OBJ_C) -Fo$@ -Fd$(@D)\ $**
C2OBJ_NP = $(C2OBJ_C) $(MPOPT) $<
C2OBJ_P = $(C2OBJ_NP) -Fo$(OBJ)\ -Fd$(OBJ)\ #
EXECONLINK = $(EXECONLINK_C) -OUT:$@ $**
EXEGUILINK = $(EXEGUILINK_C) -OUT:$@ $**
DLLCONLINK = $(DLLCONLINK_C) -OUT:$@ $**
DLLGUILINK = $(DLLGUILINK_C) -OUT:$@ $**
LIBGUI = $(LIBGUI_C) /OUT:$@ $**
LIBCON = $(LIBCON_C) /OUT:$@ $**

# Preprocess files to stdout using config.h
CPREPROCESSOUT = $(CC) /EP /FI$(INCDIR)\config.h /TC /DCPP_ONLY=1

# Resources

RC2RES_C = $(RC) $(cincdirs) $(AUXRCFLAGS)
RC2RES = $(RC2RES_C) -fo $@ $**

#----------------------------------------------------------------------
# If this is the initial invocation, we check if all the build
# utilities are there.  Also show the commands macros.

!ifndef RECURSE

REQUIRED_TOOLS= \
	"$(AWK_CMD)" "$(YACC_CMD)" "$(LEX_CMD)" "$(PYTHON)" "$(PERL)" \
	"$(CMP)" "$(SED)" "$(MAKECAT)" "$(MAKEINFO)" "$(HHC)"

!ifdef BUILD_INSTALLERS
REQUIRED_TOOLS=$(REQUIRED_TOOLS) "$(CANDLE_CMD)" "$(LIGHT_CMD)"
!endif

OPTIONAL_TOOLS="$(SH)" 

check-utils:
	@for %%g in ( $(REQUIRED_TOOLS) ) do @( \
	for /f %%f in ( "%%g" ) do @( \
		if exist %%f @( \
			echo Found %%f \
		) else if "%%~$$PATH:f"=="" @( \
			echo Could not find %%f in PATH && \
			exit /b 1 \
		) else @( \
			echo Found %%~$$PATH:f \
		) \
	) \
	)
	@for %%g in ( $(OPTIONAL_TOOLS) ) do @( \
	for /f %%f in ( "%%g" ) do @( \
		if exist %%f @( \
			echo Found %%f \
		) else if "%%~$$PATH:f"=="" @( \
			echo Could not find %%f in PATH && \
			echo Optional targets may fail. \
		) else @( \
			echo Found %%~$$PATH:f \
		) \
	) \
	)


prep:: check-utils

show-cmds:
	@$(ECHO) C2OBJ=$(C2OBJ_C:\=\\)
	@$(ECHO).
	@$(ECHO) EXECONLINK=$(EXECONLINK_C)
	@$(ECHO).
	@$(ECHO) EXEGUILINK=$(EXEGUILINK_C)
	@$(ECHO).
	@$(ECHO) DLLCONLINK=$(DLLCONLINK_C)
	@$(ECHO).
	@$(ECHO) DLLGUILINK=$(DLLGUILINK_C)
	@$(ECHO).
	@$(ECHO) LIBGUI=$(LIBGUI_C)
	@$(ECHO).
	@$(ECHO) LIBCON=$(LIBCON_C)

prep:: show-cmds

!endif				# RECURSE

{}.c{$(OBJ)}.obj::
	$(C2OBJ_C) /Fd$(OBJ)\ /Fo$(OBJ)\ $(localcflags) $(MPOPT) @<<
$<
<<

{$(OBJ)}.c{$(OBJ)}.obj::
	$(C2OBJ_C) /Fd$(OBJ)\ /Fo$(OBJ)\ $(extcflags) $(MPOPT) @<<
$<
<<

{}.cpp{$(OBJ)}.obj::
	$(C2OBJ_C) /Fd$(OBJ)\ /Fo$(OBJ)\ $(localcflags) $(MPOPT) @<<
$<
<<

{$(OBJ)}.cpp{$(OBJ)}.obj::
	$(C2OBJ_C) /Fd$(OBJ)\ /Fo$(OBJ)\ $(extcflags) $(MPOPT) @<<
$<
<<

{}.hin{$(INCDIR)}.h:
	$(CP) $< $@

{}.h{$(INCDIR)}.h:
	$(CP) $< $@

{}.h{$(INCDIR)\krb5}.h:
	$(CP) $< $@

{$(OBJ)}.h{$(INCDIR)}.h:
	$(CP) $< $@

{$(OBJ)}.x{$(OBJ)}.c:
	$(CP) $< $@

{$(OBJ)}.hx{$(INCDIR)}.h:
	$(CP) $< $@

{$(OBJ)}.hx{$(OBJ)}.h:
	$(CP) $< $@

{}.rc{$(OBJ)}.res:
	$(RC2RES)

#----------------------------------------------------------------------
# Announce the build directory

!ifdef RELDIR
all:: announce

all-tools:: announce-tools

test:: announce

clean:: announce

announce:
	@echo.
	@echo --------- Entering $(RELDIR:\= ):

announce-tools:
	@echo.
	@echo --------- Entering $(RELDIR:\= ) tools:
!endif

#----------------------------------------------------------------------
# Create any required directories if they don't already exist

prep:: mkdirs

mkdirs:
!  if !exist("$(OBJ)")
	-$(MKDIR) "$(OBJ)"
!  endif
!  if !exist("$(DESTDIR)")
	-$(MKDIR) "$(DESTDIR)"
!  endif
!  if !exist("$(LIBDIR)")
	-$(MKDIR) "$(LIBDIR)"
!  endif
!  if !exist("$(BINDIR)")
	-$(MKDIR) "$(BINDIR)"
!  endif
!  if !exist("$(PLUGINDIR)")
	-$(MKDIR) "$(PLUGINDIR)"
!  endif
!  if !exist("$(INCDIR)")
	-$(MKDIR) "$(INCDIR)"
!  endif
!  if !exist("$(DOCDIR)")
	-$(MKDIR) "$(DOCDIR)"
!  endif
!  if !exist("$(INCDIR)\gssapi")
	-$(MKDIR) "$(INCDIR)\gssapi"
!  endif
!  if !exist("$(INCDIR)\hcrypto")
	-$(MKDIR) "$(INCDIR)\hcrypto"
!  endif
!  if !exist("$(INCDIR)\kadm5")
	-$(MKDIR) "$(INCDIR)\kadm5"
!  endif
!  if !exist("$(INCDIR)\krb5")
	-$(MKDIR) "$(INCDIR)\krb5"
!  endif

#----------------------------------------------------------------------
# If SUBDIRS is defined, we should recurse into the subdirectories

!ifdef SUBDIRS
subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (pushd %%f && $(RMAKE) && popd) || exit /b 1

clean-subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (pushd %%f && $(RMAKE) clean && popd) || exit /b 1

test-subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (pushd %%f && $(RMAKE) test && popd) || exit /b 1

all:: subdirs

clean:: clean-subdirs

test:: test-subdirs

!endif

#----------------------------------------------------------------------
# Clean targets

!ifdef CLEANFILES
clean::
	-$(RM) $(CLEANFILES)
!endif
!ifdef RELDIR
clean::
	-$(RM) $(OBJ)\*.*
!endif

.SUFFIXES: .c .cpp .hin .h .x .hx

#----------------------------------------------------------------------
# Manifest handling
#
# Starting with Visual Studio 8, the C compiler and the linker
# generate manifests so that the applications will link with the
# correct side-by-side DLLs at run-time.  These are required for
# correct operation under Windows XP and later.  We also have custom
# manifests which need to be merged with the manifests that VS
# creates.
#
# The syntax for invoking the _VC_MANIFEST_EMBED_FOO macro is:
# $(_VC_MANIFEST_EMBED_???) <additional manifests>
#

MT=mt.exe -nologo

_VC_MANIFEST_EMBED_EXE= \
( if exist $@.manifest $(MT) -outputresource:$@;1 -manifest $@.manifest $(APPMANIFEST) )

_VC_MANIFEST_EMBED_EXE_NOHEIM= \
( if exist $@.manifest $(MT) -outputresource:$@;1 -manifest $@.manifest )

_VC_MANIFEST_EMBED_DLL= \
( if exist $@.manifest $(MT) -outputresource:$@;2 -manifest $@.manifest )

_MERGE_MANIFEST_DLL= \
( $(MT) -inputresource:$@;2 -manifest $(APPMANIFEST) -outputresource:$@;2 )

_INSERT_APPMANIFEST_DLL= \
( $(MT) -manifest $(APPMANIFEST) -outputresource:$@;2 )

# Note that if you are merging manifests, then the VS generated
# manifest should be cleaned up after calling _VC_MANIFEST_EMBED_???.
# This ensures that even if the DLL or EXE is executed in-place, the
# embedded manifest will be used.  Otherwise the $@.manifest file will
# be used.

_VC_MANIFEST_CLEAN= \
( if exist $@.manifest $(RM) $@.manifest )

# End of manifest handling

#----------------------------------------------------------------------
# Code and assembly signing
#
#
# SIGNTOOL is fullpath to signtool.exe from Windows v8.1 or later SDK
# (earlier versions do not support SHA-2 signatures)
#
# SIGNTOOL_C is any set of options required for certificate/private
# key selection for code signging.
#
# SIGNTOOL_O is any set of additional options to signtool.exe
#
# SIGNTOOL_T is the timestamp option

!ifdef CODESIGN
_CODESIGN=( $(CODESIGN) $@ )
_CODESIGN_SHA256=( $(CODESIGN_SHA256) $@ )
!else

!ifndef SIGNTOOL
SIGNTOOL=signtool.exe
!endif

!ifdef SIGNTOOL_C

!ifndef SIGNTOOL_T
SIGNTOOL_T=http://timestamp.verisign.com/scripts/timstamp.dll
!endif
!ifndef SIGNTOOL_T_SHA256
SIGNTOOL_T_SHA256=http://timestamp.geotrust.com/tsa
!endif

_CODESIGN=( $(SIGNTOOL) sign /fd sha1 $(SIGNTOOL_O) /t $(SIGNTOOL_T) $(SIGNTOOL_C) /v $@ )
_CODESIGN_SHA256=( $(SIGNTOOL) sign /as /fd sha256 $(SIGNTOOL_O) /tr $(SIGNTOOL_T_SHA256) $(SIGNTOOL_C) /v $@ )
!else
_CODESIGN=( echo Skipping code sign )
_CODESIGN_SHA256=( echo Skipping sha256 code sign )
!endif

!endif

#----------------------------------------------------------------------
# Symbol Store Support
#
# SYMSTORE_EXE is full path to symstore.exe
#
# SYMSTORE_ROOT is full path to root directory of symbol store
#
# SYMSTORE_COMMENT is optional comment to include in symbol store catalog entry
#

!IF DEFINED(SYMSTORE_EXE) && DEFINED(SYMSTORE_ROOT)
!IF "$(SYMSTORE_COMMENT)" != ""
SYMSTORE_COMMENT = |$(SYMSTORE_COMMENT)
!ENDIF
SYMSTORE_IMPORT= \
$(SYMSTORE_EXE) add /s $(SYMSTORE_ROOT) /t "Heimdal" /v "$(BUILD)-$(CPU)-$(VER_PACKAGE_VERSION)" /c "$(@F)$(SYMSTORE_COMMENT)" /f $*.*
!ELSE
SYMSTORE_IMPORT=@echo No symbol store
!ENDIF

#----------------------------------------------------------------------
# Convenience macros for preparing EXEs and DLLs.  These are multiline
# macros that deal with manifests and code signing.  Unless we need to
# include custom manifests, these are what we should be using to
# prepare binaries.

EXEPREP=\
( $(_VC_MANIFEST_EMBED_EXE) && $(_VC_MANIFEST_CLEAN) && $(SYMSTORE_IMPORT) && $(_CODESIGN) && $(_CODESIGN_SHA256) ) || ( $(RM) $@ && exit /b 1 )

EXEPREP_NOHEIM=\
( $(_VC_MANIFEST_EMBED_EXE_NOHEIM) && $(_VC_MANIFEST_CLEAN) && $(SYMSTORE_IMPORT) && $(_CODESIGN) && $(_CODESIGN_SHA256) ) || ( $(RM) $@ && exit /b 1 )

EXEPREP_NODIST=\
( $(_VC_MANIFEST_EMBED_EXE_NOHEIM) && $(_VC_MANIFEST_CLEAN) && $(SYMSTORE_IMPORT) ) || ( $(RM) $@ && exit /b 1 )

DLLPREP=\
( $(_VC_MANIFEST_EMBED_DLL) && $(_VC_MANIFEST_CLEAN) && $(SYMSTORE_IMPORT) && $(_CODESIGN) && $(_CODESIGN_SHA256) ) || ( $(RM) $@ && exit /b 1 )

DLLPREP_NODIST=\
( $(_VC_MANIFEST_EMBED_DLL) && $(_VC_MANIFEST_CLEAN) && $(SYMSTORE_IMPORT) ) || ( $(RM) $@ && exit /b 1 )

DLLPREP_MERGE=\
( ( $(_MERGE_MANIFEST_DLL) || $(_INSERT_APPMANIFEST_DLL) && $(SYMSTORE_IMPORT) ) && $(_CODESIGN) && $(_CODESIGN_SHA256) ) || ( $(RM) $@ && exit /b 1 )

#----------------------------------------------------------------------
# Convenience macros for import libraries and assemblies
#

LIBASN1	    =$(LIBDIR)\libasn1.lib
LIBCOMERR   =$(LIBDIR)\libcom_err.lib
LIBEDITLINE =$(LIBDIR)\libeditline.lib
LIBGSSAPI   =$(LIBDIR)\libgssapi.lib
LIBHCRYPTO  =$(LIBDIR)\libhcrypto.lib
LIBHDB	    =$(LIBDIR)\libhdb.lib
LIBHEIMBASE =$(LIBDIR)\libheimbase.lib
LIBHEIMDAL  =$(LIBDIR)\heimdal.lib
LIBHEIMIPCC =$(LIBDIR)\libheim-ipcc.lib
LIBHEIMIPCS =$(LIBDIR)\libheim-ipcs.lib
LIBHEIMNTLM =$(LIBDIR)\libheimntlm.lib
LIBHX509    =$(LIBDIR)\libhx509.lib
LIBKADM5CLNT=$(LIBDIR)\libkadm5clnt.lib
LIBKADM5SRV =$(LIBDIR)\libkadm5srv.lib
LIBKDC	    =$(LIBDIR)\libkdc.lib
LIBLTM	    =$(LIBDIR)\libltm.lib
LIBKRB5	    =$(LIBDIR)\libkrb5.lib
LIBRFC3961  =$(LIBDIR)\librfc3961.lib
LIBROKEN    =$(LIBDIR)\libroken.lib
LIBSL	    =$(LIBDIR)\libsl.lib
LIBSQLITE   =$(LIBDIR)\libsqlite.lib
LIBVERS	    =$(LIBDIR)\libvers.lib
LIBWIND	    =$(LIBDIR)\libwind.lib

!ifdef VER_DEBUG
ASM_DBG=.Debug
!endif
!ifdef VER_PRERELEASE
ASM_PRE=.Pre
!endif
!ifdef VER_PRIVATE
ASM_PVT=.Private
!endif
!ifdef VER_SPECIAL
ASM_SPC=.Special
!endif

ASMKRBNAME  =Heimdal.Kerberos$(ASM_SPC)$(ASM_PVT)$(ASM_PRE)$(ASM_DBG)
APPMANIFEST =$(INCDIR)\Heimdal.Application.$(MCPU).manifest