# $NetBSD: XLSATX,v 1.29 2019/04/26 21:40:29 sevan Exp $
include "arch/evbmips/conf/std.rmixl"
#ident "XLSATX-$Revision: 1.29 $"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
maxusers 32
#
# MEMSIZE can be used to limit memory amount used
#
#options MEMSIZE=0x10000000 # 256MB
#
# MEMLIMIT can be used to limit memory address used
#
defparam opt_memsize.h MEMLIMIT
#options MEMLIMIT=0x10000000 # 256MB
options NOFPU # No FPU
#options FPEMUL # emulate FPU insn
# Standard system options
options KTRACE # system call tracing support
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
#options SHMMAXPGS=1024 # 1024 pages is the default
#options LKM # loadable kernel modules
options NTP # network time protocol
# Debugging options
options DIAGNOSTIC # extra kernel sanity checking
#options DEBUG # extra kernel debugging support
options MSGBUFSIZE=65536 # kernel dmesg buffer
options USERCONF # userconf(4) support
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
options DDB # kernel dynamic debugger
options DDB_HISTORY_SIZE=100 # enable history editing in DDB
makeoptions DEBUG="-g" # compile full symbol table
makeoptions COPY_SYMTAB=1 # size for embedded symbol table
#options DDB_COMMANDONENTER="trace;show registers"
options DB_MAX_LINE=-1
# Compatibility options
include "conf/compat_netbsd50.config"
#options EXEC_ECOFF # exec ECOFF binaries
#options COMPAT_ULTRIX # binary compatibility with Ultrix
# File systems
file-system FFS # Berkeley Fast Filesystem
file-system MFS # memory-based filesystem
#file-system EXT2FS # second extended file system (linux)
file-system NFS # Sun NFS-compatible filesystem client
file-system KERNFS # kernel data-structure filesystem
#file-system NULLFS # NULL layered filesystem
#file-system OVERLAY # overlay file system
#file-system FDESC # user file descriptor filesystem
#file-system UMAPFS # uid/gid remapping filesystem
#file-system LFS # Log-based filesystem (still experimental)
#file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
file-system PROCFS # /proc
#file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system TMPFS # Efficient memory file system
#file-system UNION # union file system
#file-system MSDOSFS # MS-DOS FAT filesystem(s).
#file-system CODA # Coda File System; also needs vcoda (below)
file-system PTYFS # /dev/pts/N support
# File system options
#options NFSSERVER # Sun NFS-compatible filesystem server
#options QUOTA # FFS quotas
#options FFS_EI # FFS Endian Independent support
#options SOFTDEP # FFS soft updates support.
options WAPBL # File system journaling support
options FFS_NO_SNAPSHOT # No FFS snapshot support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options BUFQ_READPRIO
options BUFQ_PRIOCSCAN
# Networking options
#options GATEWAY # IP packet forwarding
options INET # Internet protocols
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # packet forwarding of multicast packets
#options PIM # Protocol Independent Multicast
#options NETATALK # AppleTalk (over Ethernet) protocol
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
# JIT compiler for bpfilter
#options SLJIT
#options BPFJIT
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options PCI_NETBSD_CONFIGURE # NetBSD configures the PCI bus
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options SCSIVERBOSE # human readable SCSI error messages
options MIIVERBOSE # verbose PHY autoconfig messages
# Bitmask for enabling the PCI IDE channels in the southbridge.
# Set bit 0 (0x01) for channel 0, bit 1 (0x02) for channel 1.
#
# Do this if your firmware (usually PMON and YAMON) doens't enable the IDE
# channels for you (thus causing the NetBSD `pciide' driver to ignore them).
options PCI_NETBSD_ENABLE_IDE=0x1
options NFS_BOOT_DHCP
config netbsd root on ? type ?
config netbsd-wm0 root on wm0 type nfs
config netbsd-msk0 root on msk0 type nfs
config netbsd-sd0a root on sd0a type ffs
mainbus0 at root
cpunode* at mainbus? node ?
cpucore* at cpunode? core ?
cpu* at cpucore? thread ?
obio0 at cpunode?
com0 at obio0 addr 0x14000 intr 9
com1 at obio0 addr 0x15000 intr 10
options COM_REGMAP
rmixl_gpio0 at obio0 addr 0x18000 intr 14
gpio* at rmixl_gpio?
rmixl_iobus0 at obio0 addr 0x19000
rmixl_nand* at rmixl_iobus? addr 0x01800000
#rmixl_nand* at rmixl_iobus? cs 2
nand* at rmixl_nand?
flash* at nand?
#rmixl_pcic* at rmixl_iobus? cs 6 addr 0x01000000
#pcmcia* at rmixl_pcic
rmixl_pcix0 at obio0
pci* at rmixl_pcix0
rmixl_pcie0 at obio0
pci* at rmixl_pcie0
ppb* at pci?
pci* at ppb?
wm* at pci? dev ? function ? # Intel i82546EB Gig-E
skc* at pci? dev ? function ?
sk* at skc?
mskc* at pci? dev ? function ?
msk* at mskc?
makphy* at mii? phy ? # Marvell 88E1000 PHYs
ukphy* at mii? phy ? # unknown PHY
rmixl_usbi0 at obio0 addr 0x25000 intr 31
ohci0 at rmixl_usbi0 addr 0x24400 size 0x400 intr 0
ohci1 at rmixl_usbi0 addr 0x24800 size 0x400 intr 1
ehci0 at rmixl_usbi0 addr 0x24000 size 0x400 intr 2
siisata* at pci? dev ? function ?
atabus* at ata?
wd* at atabus? drive ? flags 0x0000
# USB
usb* at ohci?
usb* at ehci?
uhub* at usb?
uhub* at uhub? port ?
umass* at uhub? port ? configuration ? interface ?
scsibus* at umass? channel ?
sd* at scsibus? target ? lun ?
# Pseudo-devices
# Disk/mass storage pseudo-devices
#pseudo-device ccd # concatenated disk devices
#pseudo-device raid # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID
#pseudo-device fss # file system snapshot device
pseudo-device vnd # disk-like interface to files
# Network pseudo-devices
pseudo-device bpfilter # Berkeley packet filter
pseudo-device carp # Common Address Redundancy Protocol
pseudo-device npf # NPF packet filter
pseudo-device loop # network loopback
#pseudo-device ppp # Point-to-Point Protocol
#pseudo-device sl # Serial Line IP
#pseudo-device strip # Starmode Radio IP (Metricom)
#pseudo-device tun # network tunneling over tty
#pseudo-device tap # virtual Ethernet
#pseudo-device gre # generic L3 over IP tunnel
#pseudo-device ipip # RFC 2003 IP Encapsulation
#pseudo-device gif # RFC1933 tunnel
#pseudo-device faith # IPv[46] tcp relay translation
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
#pseudo-device vlan # IEEE 802.1q encapsulation
#pseudo-device bridge # simple inter-network bridging
pseudo-device kttcp # kernel ttcp
# Miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
#pseudo-device sequencer # MIDI sequencer
pseudo-device clockctl # user control of clock subsystem
pseudo-device ksyms # /dev/ksyms
# A pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda # coda minicache <-> venus comm.
include "dev/veriexec.config"