/* $NetBSD: hidms.c,v 1.4 2019/07/09 12:56:30 ryoon Exp $ */
/*
* Copyright (c) 1998, 2017 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: hidms.c,v 1.4 2019/07/09 12:56:30 ryoon Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <dev/hid/hid.h>
#include <dev/hid/hidms.h>
#ifdef HIDMS_DEBUG
#define DPRINTF(x) if (hidmsdebug) printf x
#define DPRINTFN(n,x) if (hidmsdebug>(n)) printf x
int hidmsdebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
#define HIDMS_BUT(i) ((i) == 1 || (i) == 2 ? 3 - (i) : i)
#define PS2LBUTMASK x01
#define PS2RBUTMASK x02
#define PS2MBUTMASK x04
#define PS2BUTMASK 0x0f
static const struct {
u_int feature;
u_int flag;
} digbut[] = {
{ HUD_TIP_SWITCH, HIDMS_TIP_SWITCH },
{ HUD_SEC_TIP_SWITCH, HIDMS_SEC_TIP_SWITCH },
{ HUD_BARREL_SWITCH, HIDMS_BARREL_SWITCH },
{ HUD_ERASER, HIDMS_ERASER },
};
#define MOUSE_FLAGS_MASK (HIO_CONST|HIO_RELATIVE)
bool
hidms_setup(device_t self, struct hidms *ms, int id, void *desc, int size)
{
uint32_t flags;
struct hid_location *zloc;
bool isdigitizer;
int i, hl;
/* Sync with ims_match() */
isdigitizer = hid_is_collection(desc, size, id,
HID_USAGE2(HUP_DIGITIZERS, HUD_PEN)) ||
hid_is_collection(desc, size, id,
HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCH_SCREEN));
if (!hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X),
id, hid_input, &ms->hidms_loc_x, &flags)) {
aprint_error("\n%s: mouse has no X report\n",
device_xname(self));
return false;
}
switch (flags & MOUSE_FLAGS_MASK) {
case 0:
ms->flags |= HIDMS_ABS;
break;
case HIO_RELATIVE:
break;
default:
aprint_error("\n%s: X report 0x%04x not supported\n",
device_xname(self), flags);
return false;
}
if (!hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y),
id, hid_input, &ms->hidms_loc_y, &flags)) {
aprint_error("\n%s: mouse has no Y report\n",
device_xname(self));
return false;
}
switch (flags & MOUSE_FLAGS_MASK) {
case 0:
ms->flags |= HIDMS_ABS;
break;
case HIO_RELATIVE:
break;
default:
aprint_error("\n%s: Y report 0x%04x not supported\n",
device_xname(self), flags);
return false;
}
/* Try the wheel first as the Z activator since it's tradition. */
hl = hid_locate(desc,
size,
HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_WHEEL),
id,
hid_input,
&ms->hidms_loc_z,
&flags);
zloc = &ms->hidms_loc_z;
if (hl) {
if ((flags & MOUSE_FLAGS_MASK) != HIO_RELATIVE) {
aprint_verbose("\n%s: Wheel report 0x%04x not "
"supported\n", device_xname(self),
flags);
ms->hidms_loc_z.size = 0; /* Bad Z coord, ignore it */
} else {
ms->flags |= HIDMS_Z;
/* Wheels need the Z axis reversed. */
ms->flags ^= HIDMS_REVZ;
/* Put Z on the W coordinate */
zloc = &ms->hidms_loc_w;
}
}
hl = hid_locate(desc,
size,
HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Z),
id,
hid_input,
zloc,
&flags);
/*
* The horizontal component of the scrollball can also be given by
* Application Control Pan in the Consumer page, so if we didnt see
* any Z then check that.
*/
if (!hl) {
hl = hid_locate(desc,
size,
HID_USAGE2(HUP_CONSUMER, HUC_AC_PAN),
id,
hid_input,
zloc,
&flags);
}
if (hl) {
if ((flags & MOUSE_FLAGS_MASK) != HIO_RELATIVE) {
aprint_verbose("\n%s: Z report 0x%04x not supported\n",
device_xname(self), flags);
zloc->size = 0; /* Bad Z coord, ignore it */
} else {
if (ms->flags & HIDMS_Z)
ms->flags |= HIDMS_W;
else
ms->flags |= HIDMS_Z;
}
}
/* figure out the number of buttons */
for (i = 1; i <= MAX_BUTTONS; i++)
if (!hid_locate(desc, size, HID_USAGE2(HUP_BUTTON, i),
id, hid_input, &ms->hidms_loc_btn[i - 1], 0))
break;
if (isdigitizer) {
ms->flags |= HIDMS_DIGITIZER;
for (size_t j = 0; j < __arraycount(digbut); j++) {
if (hid_locate(desc, size, HID_USAGE2(HUP_DIGITIZERS,
digbut[j].feature), id, hid_input,
&ms->hidms_loc_btn[i - 1], 0)) {
if (i <= MAX_BUTTONS) {
i++;
ms->flags |= digbut[j].flag;
} else
aprint_error_dev(self,
"ran out of buttons\n");
}
}
}
ms->nbuttons = i - 1;
return true;
}
void
hidms_attach(device_t self, struct hidms *ms,
const struct wsmouse_accessops *ops)
{
struct wsmousedev_attach_args a;
#ifdef HIDMS_DEBUG
int i;
#endif
aprint_normal(": %d button%s%s%s%s%s%s%s%s%s\n",
ms->nbuttons, ms->nbuttons == 1 ? "" : "s",
ms->flags & HIDMS_W ? ", W" : "",
ms->flags & HIDMS_Z ? " and Z dir" : "",
ms->flags & HIDMS_W ? "s" : "",
ms->flags & HIDMS_DIGITIZER ? " digitizer" : "",
ms->flags & HIDMS_TIP_SWITCH ? ", tip" : "",
ms->flags & HIDMS_SEC_TIP_SWITCH ? ", sec tip" : "",
ms->flags & HIDMS_BARREL_SWITCH ? ", barrel" : "",
ms->flags & HIDMS_ERASER ? ", eraser" : "");
#ifdef HIDMS_DEBUG
DPRINTF(("hidms_attach: ms=%p\n", ms));
DPRINTF(("hidms_attach: X\t%d/%d\n",
ms->hidms_loc_x.pos, ms->hidms_loc_x.size));
DPRINTF(("hidms_attach: Y\t%d/%d\n",
ms->hidms_loc_y.pos, ms->hidms_loc_y.size));
if (ms->flags & HIDMS_Z)
DPRINTF(("hidms_attach: Z\t%d/%d\n",
ms->hidms_loc_z.pos, ms->hidms_loc_z.size));
if (ms->flags & HIDMS_W)
DPRINTF(("hidms_attach: W\t%d/%d\n",
ms->hidms_loc_w.pos, ms->hidms_loc_w.size));
for (i = 1; i <= ms->nbuttons; i++) {
DPRINTF(("hidms_attach: B%d\t%d/%d\n",
i, ms->hidms_loc_btn[i-1].pos,ms->hidms_loc_btn[i-1].size));
}
#endif
a.accessops = ops;
a.accesscookie = device_private(self);
ms->hidms_wsmousedev = config_found(self, &a, wsmousedevprint);
return;
}
void
hidms_intr(struct hidms *ms, void *ibuf, u_int len)
{
int dx, dy, dz, dw;
uint32_t buttons = 0;
int i, flags, s;
DPRINTFN(5,("hidms_intr: len=%d\n", len));
flags = WSMOUSE_INPUT_DELTA; /* equals 0 */
dx = hid_get_data(ibuf, &ms->hidms_loc_x);
if (ms->flags & HIDMS_ABS) {
flags |= (WSMOUSE_INPUT_ABSOLUTE_X | WSMOUSE_INPUT_ABSOLUTE_Y);
dy = hid_get_data(ibuf, &ms->hidms_loc_y);
tpcalib_trans(&ms->sc_tpcalib, dx, dy, &dx, &dy);
} else
dy = -hid_get_data(ibuf, &ms->hidms_loc_y);
dz = hid_get_data(ibuf, &ms->hidms_loc_z);
dw = hid_get_data(ibuf, &ms->hidms_loc_w);
if (ms->flags & HIDMS_REVZ)
dz = -dz;
for (i = 0; i < ms->nbuttons; i++)
if (hid_get_data(ibuf, &ms->hidms_loc_btn[i]))
buttons |= (1 << HIDMS_BUT(i));
if (dx != 0 || dy != 0 || dz != 0 || dw != 0 ||
buttons != ms->hidms_buttons) {
DPRINTFN(10, ("hidms_intr: x:%d y:%d z:%d w:%d buttons:0x%x\n",
dx, dy, dz, dw, buttons));
ms->hidms_buttons = buttons;
if (ms->hidms_wsmousedev != NULL) {
s = spltty();
wsmouse_input(ms->hidms_wsmousedev, buttons, dx, dy, dz,
dw, flags);
splx(s);
}
}
}