/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2008 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
/*
* Given several files containing CTF data, merge and uniquify that data into
* a single CTF section in an output file.
*
* Merges can proceed independently. As such, we perform the merges in parallel
* using a worker thread model. A given glob of CTF data (either all of the CTF
* data from a single input file, or the result of one or more merges) can only
* be involved in a single merge at any given time, so the process decreases in
* parallelism, especially towards the end, as more and more files are
* consolidated, finally resulting in a single merge of two large CTF graphs.
* Unfortunately, the last merge is also the slowest, as the two graphs being
* merged are each the product of merges of half of the input files.
*
* The algorithm consists of two phases, described in detail below. The first
* phase entails the merging of CTF data in groups of eight. The second phase
* takes the results of Phase I, and merges them two at a time. This disparity
* is due to an observation that the merge time increases at least quadratically
* with the size of the CTF data being merged. As such, merges of CTF graphs
* newly read from input files are much faster than merges of CTF graphs that
* are themselves the results of prior merges.
*
* A further complication is the need to ensure the repeatability of CTF merges.
* That is, a merge should produce the same output every time, given the same
* input. In both phases, this consistency requirement is met by imposing an
* ordering on the merge process, thus ensuring that a given set of input files
* are merged in the same order every time.
*
* Phase I
*
* The main thread reads the input files one by one, transforming the CTF
* data they contain into tdata structures. When a given file has been read
* and parsed, it is placed on the work queue for retrieval by worker threads.
*
* Central to Phase I is the Work In Progress (wip) array, which is used to
* merge batches of files in a predictable order. Files are read by the main
* thread, and are merged into wip array elements in round-robin order. When
* the number of files merged into a given array slot equals the batch size,
* the merged CTF graph in that array is added to the done slot in order by
* array slot.
*
* For example, consider a case where we have five input files, a batch size
* of two, a wip array size of two, and two worker threads (T1 and T2).
*
* 1. The wip array elements are assigned initial batch numbers 0 and 1.
* 2. T1 reads an input file from the input queue (wq_queue). This is the
* first input file, so it is placed into wip[0]. The second file is
* similarly read and placed into wip[1]. The wip array slots now contain
* one file each (wip_nmerged == 1).
* 3. T1 reads the third input file, which it merges into wip[0]. The
* number of files in wip[0] is equal to the batch size.
* 4. T2 reads the fourth input file, which it merges into wip[1]. wip[1]
* is now full too.
* 5. T2 attempts to place the contents of wip[1] on the done queue
* (wq_done_queue), but it can't, since the batch ID for wip[1] is 1.
* Batch 0 needs to be on the done queue before batch 1 can be added, so
* T2 blocks on wip[1]'s cv.
* 6. T1 attempts to place the contents of wip[0] on the done queue, and
* succeeds, updating wq_lastdonebatch to 0. It clears wip[0], and sets
* its batch ID to 2. T1 then signals wip[1]'s cv to awaken T2.
* 7. T2 wakes up, notices that wq_lastdonebatch is 0, which means that
* batch 1 can now be added. It adds wip[1] to the done queue, clears
* wip[1], and sets its batch ID to 3. It signals wip[0]'s cv, and
* restarts.
*
* The above process continues until all input files have been consumed. At
* this point, a pair of barriers are used to allow a single thread to move
* any partial batches from the wip array to the done array in batch ID order.
* When this is complete, wq_done_queue is moved to wq_queue, and Phase II
* begins.
*
* Locking Semantics (Phase I)
*
* The input queue (wq_queue) and the done queue (wq_done_queue) are
* protected by separate mutexes - wq_queue_lock and wq_done_queue. wip
* array slots are protected by their own mutexes, which must be grabbed
* before releasing the input queue lock. The wip array lock is dropped
* when the thread restarts the loop. If the array slot was full, the
* array lock will be held while the slot contents are added to the done
* queue. The done queue lock is used to protect the wip slot cv's.
*
* The pow number is protected by the queue lock. The master batch ID
* and last completed batch (wq_lastdonebatch) counters are protected *in
* Phase I* by the done queue lock.
*
* Phase II
*
* When Phase II begins, the queue consists of the merged batches from the
* first phase. Assume we have five batches:
*
* Q: a b c d e
*
* Using the same batch ID mechanism we used in Phase I, but without the wip
* array, worker threads remove two entries at a time from the beginning of
* the queue. These two entries are merged, and are added back to the tail
* of the queue, as follows:
*
* Q: a b c d e # start
* Q: c d e ab # a, b removed, merged, added to end
* Q: e ab cd # c, d removed, merged, added to end
* Q: cd eab # e, ab removed, merged, added to end
* Q: cdeab # cd, eab removed, merged, added to end
*
* When one entry remains on the queue, with no merges outstanding, Phase II
* finishes. We pre-determine the stopping point by pre-calculating the
* number of nodes that will appear on the list. In the example above, the
* number (wq_ninqueue) is 9. When ninqueue is 1, we conclude Phase II by
* signaling the main thread via wq_done_cv.
*
* Locking Semantics (Phase II)
*
* The queue (wq_queue), ninqueue, and the master batch ID and last
* completed batch counters are protected by wq_queue_lock. The done
* queue and corresponding lock are unused in Phase II as is the wip array.
*
* Uniquification
*
* We want the CTF data that goes into a given module to be as small as
* possible. For example, we don't want it to contain any type data that may
* be present in another common module. As such, after creating the master
* tdata_t for a given module, we can, if requested by the user, uniquify it
* against the tdata_t from another module (genunix in the case of the SunOS
* kernel). We perform a merge between the tdata_t for this module and the
* tdata_t from genunix. Nodes found in this module that are not present in
* genunix are added to a third tdata_t - the uniquified tdata_t.
*
* Additive Merges
*
* In some cases, for example if we are issuing a new version of a common
* module in a patch, we need to make sure that the CTF data already present
* in that module does not change. Changes to this data would void the CTF
* data in any module that uniquified against the common module. To preserve
* the existing data, we can perform what is known as an additive merge. In
* this case, a final uniquification is performed against the CTF data in the
* previous version of the module. The result will be the placement of new
* and changed data after the existing data, thus preserving the existing type
* ID space.
*
* Saving the result
*
* When the merges are complete, the resulting tdata_t is placed into the
* output file, replacing the .SUNW_ctf section (if any) already in that file.
*
* The person who changes the merging thread code in this file without updating
* this comment will not live to see the stock hit five.
*/
#if HAVE_NBTOOL_CONFIG_H
# include "nbtool_config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#ifndef _NETBSD_SOURCE
#define _NETBSD_SOURCE /* XXX TBD fix this */
#include <unistd.h>
#undef _NETBSD_SOURCE
#else
#include <unistd.h>
#endif
#include <pthread.h>
#include <assert.h>
#ifdef illumos
#include <synch.h>
#endif
#include <signal.h>
#include <libgen.h>
#include <string.h>
#include <errno.h>
#ifdef illumos
#include <alloca.h>
#endif
#include <sys/param.h>
#include <sys/types.h>
#include <sys/mman.h>
#ifdef illumos
#include <sys/sysconf.h>
#endif
#include "ctf_headers.h"
#include "ctftools.h"
#include "ctfmerge.h"
#include "traverse.h"
#include "memory.h"
#include "fifo.h"
#include "barrier.h"
#pragma init(bigheap)
#define MERGE_PHASE1_BATCH_SIZE 8
#define MERGE_PHASE1_MAX_SLOTS 5
#define MERGE_INPUT_THROTTLE_LEN 10
const char *progname;
static char *outfile = NULL;
static char *tmpname = NULL;
static int dynsym;
int debug_level = DEBUG_LEVEL;
#ifdef illumos
static size_t maxpgsize = 0x400000;
#endif
static void
usage(void)
{
(void) fprintf(stderr,
"Usage: %s [-fgstv] -l label | -L labelenv -o outfile file ...\n"
" %s [-fgstv] -l label | -L labelenv -o outfile -d uniqfile\n"
" %*s [-g] [-D uniqlabel] file ...\n"
" %s [-fgstv] -l label | -L labelenv -o outfile -w withfile "
"file ...\n"
" %s [-g] -c srcfile destfile\n"
"\n"
" Note: if -L labelenv is specified and labelenv is not set in\n"
" the environment, a default value is used.\n",
progname, progname, (int)strlen(progname), " ",
progname, progname);
}
#ifdef illumos
static void
bigheap(void)
{
size_t big, *size;
int sizes;
struct memcntl_mha mha;
/*
* First, get the available pagesizes.
*/
if ((sizes = getpagesizes(NULL, 0)) == -1)
return;
if (sizes == 1 || (size = alloca(sizeof (size_t) * sizes)) == NULL)
return;
if (getpagesizes(size, sizes) == -1)
return;
while (size[sizes - 1] > maxpgsize)
sizes--;
/* set big to the largest allowed page size */
big = size[sizes - 1];
if (big & (big - 1)) {
/*
* The largest page size is not a power of two for some
* inexplicable reason; return.
*/
return;
}
/*
* Now, align our break to the largest page size.
*/
if (brk((void *)((((uintptr_t)sbrk(0) - 1) & ~(big - 1)) + big)) != 0)
return;
/*
* set the preferred page size for the heap
*/
mha.mha_cmd = MHA_MAPSIZE_BSSBRK;
mha.mha_flags = 0;
mha.mha_pagesize = big;
(void) memcntl(NULL, 0, MC_HAT_ADVISE, (caddr_t)&mha, 0, 0);
}
#endif
static void
finalize_phase_one(workqueue_t *wq)
{
int startslot, i;
/*
* wip slots are cleared out only when maxbatchsz td's have been merged
* into them. We're not guaranteed that the number of files we're
* merging is a multiple of maxbatchsz, so there will be some partial
* groups in the wip array. Move them to the done queue in batch ID
* order, starting with the slot containing the next batch that would
* have been placed on the done queue, followed by the others.
* One thread will be doing this while the others wait at the barrier
* back in worker_thread(), so we don't need to worry about pesky things
* like locks.
*/
for (startslot = -1, i = 0; i < wq->wq_nwipslots; i++) {
if (wq->wq_wip[i].wip_batchid == wq->wq_lastdonebatch + 1) {
startslot = i;
break;
}
}
assert(startslot != -1);
for (i = startslot; i < startslot + wq->wq_nwipslots; i++) {
int slotnum = i % wq->wq_nwipslots;
wip_t *wipslot = &wq->wq_wip[slotnum];
if (wipslot->wip_td != NULL) {
debug(2, "clearing slot %d (%d) (saving %d)\n",
slotnum, i, wipslot->wip_nmerged);
} else
debug(2, "clearing slot %d (%d)\n", slotnum, i);
if (wipslot->wip_td != NULL) {
fifo_add(wq->wq_donequeue, wipslot->wip_td);
wq->wq_wip[slotnum].wip_td = NULL;
}
}
wq->wq_lastdonebatch = wq->wq_next_batchid++;
debug(2, "phase one done: donequeue has %d items\n",
fifo_len(wq->wq_donequeue));
}
static void
init_phase_two(workqueue_t *wq)
{
int num;
/*
* We're going to continually merge the first two entries on the queue,
* placing the result on the end, until there's nothing left to merge.
* At that point, everything will have been merged into one. The
* initial value of ninqueue needs to be equal to the total number of
* entries that will show up on the queue, both at the start of the
* phase and as generated by merges during the phase.
*/
wq->wq_ninqueue = num = fifo_len(wq->wq_donequeue);
while (num != 1) {
wq->wq_ninqueue += num / 2;
num = num / 2 + num % 2;
}
/*
* Move the done queue to the work queue. We won't be using the done
* queue in phase 2.
*/
assert(fifo_len(wq->wq_queue) == 0);
fifo_free(wq->wq_queue, NULL);
wq->wq_queue = wq->wq_donequeue;
}
static void
wip_save_work(workqueue_t *wq, wip_t *slot, int slotnum)
{
pthread_mutex_lock(&wq->wq_donequeue_lock);
while (wq->wq_lastdonebatch + 1 < slot->wip_batchid)
pthread_cond_wait(&slot->wip_cv, &wq->wq_donequeue_lock);
assert(wq->wq_lastdonebatch + 1 == slot->wip_batchid);
fifo_add(wq->wq_donequeue, slot->wip_td);
wq->wq_lastdonebatch++;
pthread_cond_signal(&wq->wq_wip[(slotnum + 1) %
wq->wq_nwipslots].wip_cv);
/* reset the slot for next use */
slot->wip_td = NULL;
slot->wip_batchid = wq->wq_next_batchid++;
pthread_mutex_unlock(&wq->wq_donequeue_lock);
}
static void
wip_add_work(wip_t *slot, tdata_t *pow)
{
if (slot->wip_td == NULL) {
slot->wip_td = pow;
slot->wip_nmerged = 1;
} else {
debug(2, "0x%jx: merging %p into %p\n",
(uintmax_t)(uintptr_t)pthread_self(),
(void *)pow, (void *)slot->wip_td);
merge_into_master(pow, slot->wip_td, NULL, 0);
tdata_free(pow);
slot->wip_nmerged++;
}
}
static void
worker_runphase1(workqueue_t *wq)
{
wip_t *wipslot;
tdata_t *pow;
int wipslotnum, pownum;
for (;;) {
pthread_mutex_lock(&wq->wq_queue_lock);
while (fifo_empty(wq->wq_queue)) {
if (wq->wq_nomorefiles == 1) {
pthread_cond_broadcast(&wq->wq_work_avail);
pthread_mutex_unlock(&wq->wq_queue_lock);
/* on to phase 2 ... */
return;
}
pthread_cond_wait(&wq->wq_work_avail,
&wq->wq_queue_lock);
}
/* there's work to be done! */
pow = fifo_remove(wq->wq_queue);
pownum = wq->wq_nextpownum++;
pthread_cond_broadcast(&wq->wq_work_removed);
assert(pow != NULL);
/* merge it into the right slot */
wipslotnum = pownum % wq->wq_nwipslots;
wipslot = &wq->wq_wip[wipslotnum];
pthread_mutex_lock(&wipslot->wip_lock);
pthread_mutex_unlock(&wq->wq_queue_lock);
wip_add_work(wipslot, pow);
if (wipslot->wip_nmerged == wq->wq_maxbatchsz)
wip_save_work(wq, wipslot, wipslotnum);
pthread_mutex_unlock(&wipslot->wip_lock);
}
}
static void
worker_runphase2(workqueue_t *wq)
{
tdata_t *pow1, *pow2;
int batchid;
for (;;) {
pthread_mutex_lock(&wq->wq_queue_lock);
if (wq->wq_ninqueue == 1) {
pthread_cond_broadcast(&wq->wq_work_avail);
pthread_mutex_unlock(&wq->wq_queue_lock);
debug(2, "0x%jx: entering p2 completion barrier\n",
(uintmax_t)(uintptr_t)pthread_self());
if (barrier_wait(&wq->wq_bar1)) {
pthread_mutex_lock(&wq->wq_queue_lock);
wq->wq_alldone = 1;
pthread_cond_signal(&wq->wq_alldone_cv);
pthread_mutex_unlock(&wq->wq_queue_lock);
}
return;
}
if (fifo_len(wq->wq_queue) < 2) {
pthread_cond_wait(&wq->wq_work_avail,
&wq->wq_queue_lock);
pthread_mutex_unlock(&wq->wq_queue_lock);
continue;
}
/* there's work to be done! */
pow1 = fifo_remove(wq->wq_queue);
pow2 = fifo_remove(wq->wq_queue);
wq->wq_ninqueue -= 2;
batchid = wq->wq_next_batchid++;
pthread_mutex_unlock(&wq->wq_queue_lock);
debug(2, "0x%jx: merging %p into %p\n",
(uintmax_t)(uintptr_t)pthread_self(),
(void *)pow1, (void *)pow2);
merge_into_master(pow1, pow2, NULL, 0);
tdata_free(pow1);
/*
* merging is complete. place at the tail of the queue in
* proper order.
*/
pthread_mutex_lock(&wq->wq_queue_lock);
while (wq->wq_lastdonebatch + 1 != batchid) {
pthread_cond_wait(&wq->wq_done_cv,
&wq->wq_queue_lock);
}
wq->wq_lastdonebatch = batchid;
fifo_add(wq->wq_queue, pow2);
debug(2, "0x%jx: added %p to queue, len now %d, ninqueue %d\n",
(uintmax_t)(uintptr_t)pthread_self(), (void *)pow2,
fifo_len(wq->wq_queue), wq->wq_ninqueue);
pthread_cond_broadcast(&wq->wq_done_cv);
pthread_cond_signal(&wq->wq_work_avail);
pthread_mutex_unlock(&wq->wq_queue_lock);
}
}
/*
* Main loop for worker threads.
*/
static void
worker_thread(workqueue_t *wq)
{
worker_runphase1(wq);
debug(2, "0x%jx: entering first barrier\n",
(uintmax_t)(uintptr_t)pthread_self());
if (barrier_wait(&wq->wq_bar1)) {
debug(2, "0x%jx: doing work in first barrier\n",
(uintmax_t)(uintptr_t)pthread_self());
finalize_phase_one(wq);
init_phase_two(wq);
debug(2, "0x%jx: ninqueue is %d, %d on queue\n",
(uintmax_t)(uintptr_t)pthread_self(),
wq->wq_ninqueue, fifo_len(wq->wq_queue));
}
debug(2, "0x%jx: entering second barrier\n",
(uintmax_t)(uintptr_t)pthread_self());
(void) barrier_wait(&wq->wq_bar2);
debug(2, "0x%jx: phase 1 complete\n",
(uintmax_t)(uintptr_t)pthread_self());
worker_runphase2(wq);
}
/*
* Pass a tdata_t tree, built from an input file, off to the work queue for
* consumption by worker threads.
*/
static int
merge_ctf_cb(tdata_t *td, char *name, void *arg)
{
workqueue_t *wq = arg;
debug(3, "Adding tdata %p for processing\n", (void *)td);
pthread_mutex_lock(&wq->wq_queue_lock);
while (fifo_len(wq->wq_queue) > wq->wq_ithrottle) {
debug(2, "Throttling input (len = %d, throttle = %d)\n",
fifo_len(wq->wq_queue), wq->wq_ithrottle);
pthread_cond_wait(&wq->wq_work_removed, &wq->wq_queue_lock);
}
fifo_add(wq->wq_queue, td);
debug(1, "Thread 0x%jx announcing %s\n",
(uintmax_t)(uintptr_t)pthread_self(), name);
pthread_cond_broadcast(&wq->wq_work_avail);
pthread_mutex_unlock(&wq->wq_queue_lock);
return (1);
}
/*
* This program is intended to be invoked from a Makefile, as part of the build.
* As such, in the event of a failure or user-initiated interrupt (^C), we need
* to ensure that a subsequent re-make will cause ctfmerge to be executed again.
* Unfortunately, ctfmerge will usually be invoked directly after (and as part
* of the same Makefile rule as) a link, and will operate on the linked file
* in place. If we merely exit upon receipt of a SIGINT, a subsequent make
* will notice that the *linked* file is newer than the object files, and thus
* will not reinvoke ctfmerge. The only way to ensure that a subsequent make
* reinvokes ctfmerge, is to remove the file to which we are adding CTF
* data (confusingly named the output file). This means that the link will need
* to happen again, but links are generally fast, and we can't allow the merge
* to be skipped.
*
* Another possibility would be to block SIGINT entirely - to always run to
* completion. The run time of ctfmerge can, however, be measured in minutes
* in some cases, so this is not a valid option.
*/
static void __dead
handle_sig(int sig)
{
terminate("Caught signal %d - exiting\n", sig);
}
static void
terminate_cleanup(void)
{
int dounlink = getenv("CTFMERGE_TERMINATE_NO_UNLINK") ? 0 : 1;
if (tmpname != NULL && dounlink)
unlink(tmpname);
if (outfile == NULL)
return;
#if !defined (__FreeBSD__) && !defined(__NetBSD__)
if (dounlink) {
fprintf(stderr, "Removing %s\n", outfile);
unlink(outfile);
}
#endif
}
static void
copy_ctf_data(char *srcfile, char *destfile, int keep_stabs)
{
tdata_t *srctd;
if (read_ctf(&srcfile, 1, NULL, read_ctf_save_cb, &srctd, 1) == 0)
terminate("No CTF data found in source file %s\n", srcfile);
tmpname = mktmpname(destfile, ".ctf");
write_ctf(srctd, destfile, tmpname, CTF_COMPRESS | CTF_SWAP_BYTES | keep_stabs);
if (rename(tmpname, destfile) != 0) {
terminate("Couldn't rename temp file %s to %s", tmpname,
destfile);
}
free(tmpname);
tdata_free(srctd);
}
static void
wq_init(workqueue_t *wq, int nfiles)
{
int throttle, nslots, i;
if (getenv("CTFMERGE_MAX_SLOTS"))
nslots = atoi(getenv("CTFMERGE_MAX_SLOTS"));
else
nslots = MERGE_PHASE1_MAX_SLOTS;
if (getenv("CTFMERGE_PHASE1_BATCH_SIZE"))
wq->wq_maxbatchsz = atoi(getenv("CTFMERGE_PHASE1_BATCH_SIZE"));
else
wq->wq_maxbatchsz = MERGE_PHASE1_BATCH_SIZE;
nslots = MIN(nslots, (nfiles + wq->wq_maxbatchsz - 1) /
wq->wq_maxbatchsz);
wq->wq_wip = xcalloc(sizeof (wip_t) * nslots);
wq->wq_nwipslots = nslots;
#ifdef _SC_NPROCESSORS_ONLN
wq->wq_nthreads = MIN(sysconf(_SC_NPROCESSORS_ONLN) * 3 / 2, nslots);
#else
wq->wq_nthreads = 2;
#endif
wq->wq_thread = xmalloc(sizeof (pthread_t) * wq->wq_nthreads);
if (getenv("CTFMERGE_INPUT_THROTTLE"))
throttle = atoi(getenv("CTFMERGE_INPUT_THROTTLE"));
else
throttle = MERGE_INPUT_THROTTLE_LEN;
wq->wq_ithrottle = throttle * wq->wq_nthreads;
debug(1, "Using %d slots, %d threads\n", wq->wq_nwipslots,
wq->wq_nthreads);
wq->wq_next_batchid = 0;
for (i = 0; i < nslots; i++) {
pthread_mutex_init(&wq->wq_wip[i].wip_lock, NULL);
pthread_cond_init(&wq->wq_wip[i].wip_cv, NULL);
wq->wq_wip[i].wip_batchid = wq->wq_next_batchid++;
}
pthread_mutex_init(&wq->wq_queue_lock, NULL);
wq->wq_queue = fifo_new();
pthread_cond_init(&wq->wq_work_avail, NULL);
pthread_cond_init(&wq->wq_work_removed, NULL);
wq->wq_ninqueue = nfiles;
wq->wq_nextpownum = 0;
pthread_mutex_init(&wq->wq_donequeue_lock, NULL);
wq->wq_donequeue = fifo_new();
wq->wq_lastdonebatch = -1;
pthread_cond_init(&wq->wq_done_cv, NULL);
pthread_cond_init(&wq->wq_alldone_cv, NULL);
wq->wq_alldone = 0;
barrier_init(&wq->wq_bar1, wq->wq_nthreads);
barrier_init(&wq->wq_bar2, wq->wq_nthreads);
wq->wq_nomorefiles = 0;
}
static void
start_threads(workqueue_t *wq)
{
sigset_t sets;
int i;
sigemptyset(&sets);
sigaddset(&sets, SIGINT);
sigaddset(&sets, SIGQUIT);
sigaddset(&sets, SIGTERM);
pthread_sigmask(SIG_BLOCK, &sets, NULL);
for (i = 0; i < wq->wq_nthreads; i++) {
pthread_create(&wq->wq_thread[i], NULL,
(void *(*)(void *))worker_thread, wq);
}
#ifdef illumos
sigset(SIGINT, handle_sig);
sigset(SIGQUIT, handle_sig);
sigset(SIGTERM, handle_sig);
#else
signal(SIGINT, handle_sig);
signal(SIGQUIT, handle_sig);
signal(SIGTERM, handle_sig);
#endif
pthread_sigmask(SIG_UNBLOCK, &sets, NULL);
}
static void
join_threads(workqueue_t *wq)
{
int i;
for (i = 0; i < wq->wq_nthreads; i++) {
pthread_join(wq->wq_thread[i], NULL);
}
}
static int
strcompare(const void *p1, const void *p2)
{
const char *s1 = *((const char * const *)p1);
const char *s2 = *((const char * const *)p2);
return (strcmp(s1, s2));
}
/*
* Core work queue structure; passed to worker threads on thread creation
* as the main point of coordination. Allocate as a static structure; we
* could have put this into a local variable in main, but passing a pointer
* into your stack to another thread is fragile at best and leads to some
* hard-to-debug failure modes.
*/
static workqueue_t wq;
int
main(int argc, char **argv)
{
tdata_t *mstrtd, *savetd;
char *uniqfile = NULL, *uniqlabel = NULL;
char *withfile = NULL;
char *label = NULL;
char **ifiles, **tifiles;
int verbose = 0, docopy = 0;
int write_fuzzy_match = 0;
int keep_stabs = 0;
int require_ctf = 0;
int nifiles, nielems;
int c, i, idx, tidx, err;
progname = basename(argv[0]);
if (getenv("CTFMERGE_DEBUG_LEVEL"))
debug_level = atoi(getenv("CTFMERGE_DEBUG_LEVEL"));
err = 0;
while ((c = getopt(argc, argv, ":cd:D:fgl:L:o:tvw:s")) != EOF) {
switch (c) {
case 'c':
docopy = 1;
break;
case 'd':
/* Uniquify against `uniqfile' */
uniqfile = optarg;
break;
case 'D':
/* Uniquify against label `uniqlabel' in `uniqfile' */
uniqlabel = optarg;
break;
case 'f':
write_fuzzy_match = CTF_FUZZY_MATCH;
break;
case 'g':
keep_stabs = CTF_KEEP_STABS;
break;
case 'l':
/* Label merged types with `label' */
label = optarg;
break;
case 'L':
/* Label merged types with getenv(`label`) */
if ((label = getenv(optarg)) == NULL)
label = __UNCONST(CTF_DEFAULT_LABEL);
break;
case 'o':
/* Place merged types in CTF section in `outfile' */
outfile = optarg;
break;
case 't':
/* Insist *all* object files built from C have CTF */
require_ctf = 1;
break;
case 'v':
/* More debugging information */
verbose = 1;
break;
case 'w':
/* Additive merge with data from `withfile' */
withfile = optarg;
break;
case 's':
/* use the dynsym rather than the symtab */
dynsym = CTF_USE_DYNSYM;
break;
default:
usage();
exit(2);
}
}
/* Validate arguments */
if (docopy) {
if (uniqfile != NULL || uniqlabel != NULL || label != NULL ||
outfile != NULL || withfile != NULL || dynsym != 0)
err++;
if (argc - optind != 2)
err++;
} else {
if (uniqfile != NULL && withfile != NULL)
err++;
if (uniqlabel != NULL && uniqfile == NULL)
err++;
if (outfile == NULL || label == NULL)
err++;
if (argc - optind == 0)
err++;
}
if (err) {
usage();
exit(2);
}
if (getenv("STRIPSTABS_KEEP_STABS") != NULL)
keep_stabs = CTF_KEEP_STABS;
if (uniqfile && access(uniqfile, R_OK) != 0) {
warning("Uniquification file %s couldn't be opened and "
"will be ignored.\n", uniqfile);
uniqfile = NULL;
}
if (withfile && access(withfile, R_OK) != 0) {
warning("With file %s couldn't be opened and will be "
"ignored.\n", withfile);
withfile = NULL;
}
if (outfile && access(outfile, R_OK|W_OK) != 0)
terminate("Cannot open output file %s for r/w", outfile);
/*
* This is ugly, but we don't want to have to have a separate tool
* (yet) just for copying an ELF section with our specific requirements,
* so we shoe-horn a copier into ctfmerge.
*/
if (docopy) {
copy_ctf_data(argv[optind], argv[optind + 1], keep_stabs);
exit(0);
}
set_terminate_cleanup(terminate_cleanup);
/* Sort the input files and strip out duplicates */
nifiles = argc - optind;
ifiles = xmalloc(sizeof (char *) * nifiles);
tifiles = xmalloc(sizeof (char *) * nifiles);
for (i = 0; i < nifiles; i++)
tifiles[i] = argv[optind + i];
qsort(tifiles, nifiles, sizeof (char *), strcompare);
ifiles[0] = tifiles[0];
for (idx = 0, tidx = 1; tidx < nifiles; tidx++) {
if (strcmp(ifiles[idx], tifiles[tidx]) != 0)
ifiles[++idx] = tifiles[tidx];
}
nifiles = idx + 1;
/* Make sure they all exist */
if ((nielems = count_files(ifiles, nifiles)) < 0)
terminate("Some input files were inaccessible\n");
/* Prepare for the merge */
wq_init(&wq, nielems);
start_threads(&wq);
/*
* Start the merge
*
* We're reading everything from each of the object files, so we
* don't need to specify labels.
*/
if (read_ctf(ifiles, nifiles, NULL, merge_ctf_cb,
&wq, require_ctf) == 0) {
/*
* If we're verifying that C files have CTF, it's safe to
* assume that in this case, we're building only from assembly
* inputs.
*/
if (require_ctf)
exit(0);
terminate("No ctf sections found to merge\n");
}
pthread_mutex_lock(&wq.wq_queue_lock);
wq.wq_nomorefiles = 1;
pthread_cond_broadcast(&wq.wq_work_avail);
pthread_mutex_unlock(&wq.wq_queue_lock);
pthread_mutex_lock(&wq.wq_queue_lock);
while (wq.wq_alldone == 0)
pthread_cond_wait(&wq.wq_alldone_cv, &wq.wq_queue_lock);
pthread_mutex_unlock(&wq.wq_queue_lock);
join_threads(&wq);
/*
* All requested files have been merged, with the resulting tree in
* mstrtd. savetd is the tree that will be placed into the output file.
*
* Regardless of whether we're doing a normal uniquification or an
* additive merge, we need a type tree that has been uniquified
* against uniqfile or withfile, as appropriate.
*
* If we're doing a uniquification, we stuff the resulting tree into
* outfile. Otherwise, we add the tree to the tree already in withfile.
*/
assert(fifo_len(wq.wq_queue) == 1);
mstrtd = fifo_remove(wq.wq_queue);
if (verbose || debug_level) {
debug(2, "Statistics for td %p\n", (void *)mstrtd);
iidesc_stats(mstrtd->td_iihash);
}
if (uniqfile != NULL || withfile != NULL) {
char *reffile, *reflabel = NULL;
tdata_t *reftd;
if (uniqfile != NULL) {
reffile = uniqfile;
reflabel = uniqlabel;
} else
reffile = withfile;
if (read_ctf(&reffile, 1, reflabel, read_ctf_save_cb,
&reftd, require_ctf) == 0) {
terminate("No CTF data found in reference file %s\n",
reffile);
}
savetd = tdata_new();
if (CTF_TYPE_ISCHILD(reftd->td_nextid))
terminate("No room for additional types in master\n");
savetd->td_nextid = withfile ? reftd->td_nextid :
CTF_INDEX_TO_TYPE(1, TRUE);
merge_into_master(mstrtd, reftd, savetd, 0);
tdata_label_add(savetd, label, CTF_LABEL_LASTIDX);
if (withfile) {
/*
* savetd holds the new data to be added to the withfile
*/
tdata_t *withtd = reftd;
tdata_merge(withtd, savetd);
savetd = withtd;
} else {
char uniqname[MAXPATHLEN];
labelent_t *parle;
parle = tdata_label_top(reftd);
savetd->td_parlabel = xstrdup(parle->le_name);
strncpy(uniqname, reffile, sizeof (uniqname));
uniqname[MAXPATHLEN - 1] = '\0';
savetd->td_parname = xstrdup(basename(uniqname));
}
} else {
/*
* No post processing. Write the merged tree as-is into the
* output file.
*/
tdata_label_free(mstrtd);
tdata_label_add(mstrtd, label, CTF_LABEL_LASTIDX);
savetd = mstrtd;
}
tmpname = mktmpname(outfile, ".ctf");
write_ctf(savetd, outfile, tmpname,
CTF_COMPRESS | CTF_SWAP_BYTES | write_fuzzy_match | dynsym | keep_stabs);
if (rename(tmpname, outfile) != 0)
terminate("Couldn't rename output temp file %s", tmpname);
free(tmpname);
return (0);
}