/* $NetBSD: wzero3_reg.h,v 1.7 2012/01/21 19:44:29 nonaka Exp $ */
/*-
* Copyright (C) 2008, 2009, 2010 NONAKA Kimihiro <nonaka@netbsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _HPCARM_DEV_WZERO3_REG_H_
#define _HPCARM_DEV_WZERO3_REG_H_
/* GPIO --------------------------------------------------------------------- */
/*
* WS003SH/WS004SH specific parameter
*/
#define GPIO_WS003SH_SD_DETECT 9 /* In */
#define GPIO_WS003SH_TOUCH_PANEL 11 /* In */
#define GPIO_WS003SH_SLIDE 12 /* In */
#define GPIO_WS003SH_FULLKEY_LED 17 /* Out: H:ON, L:OFF */
#define GPIO_WS003SH_ANTENNA_LED 37 /* Out: H:ON, L:OFF */
#define GPIO_WS003SH_MAX1233_CS 48 /* Out */
#define GPIO_WS003SH_RESET 89 /* Out */
#define GPIO_WS003SH_POWER_BUTTON 95 /* In */
#define GPIO_WS003SH_VIB 97 /* Out */
#define GPIO_WS003SH_USB_CLIENT_DETECT 103 /* In */
#define GPIO_WS003SH_SD_POWER 107 /* Out: H:ON, L:OFF */
#define GPIO_WS003SH_CHARGE 114 /* Out: H:ON, L:OFF */
#define GPIO_WS003SH_AC_DETECT 115 /* In */
/* WS003SH: GPIO OUT pin
* CLR: 10,16,18,19,20,21,23,33,40,56,87,90,91,104,119,120
* SET: 39,54,57
*/
/*
* WS007SH specific parameter
*/
#define GPIO_WS007SH_RESET_BUTTON 1 /* In: L: press, H: release */
#define GPIO_WS007SH_POWER_BUTTON 9 /* In */
#define GPIO_WS007SH_TOUCH_PANEL 21 /* In */
#define GPIO_WS007SH_ADS7846_CS 33 /* Out */
#define GPIO_WS007SH_USB_CLIENT_DETECT 35 /* In */
#define GPIO_WS007SH_USB_HOST_POWER 37 /* Out */
#define GPIO_WS007SH_USB_HOST_DETECT 41 /* In */
#define GPIO_WS007SH_SD_DETECT 48 /* In */
#define GPIO_WS007SH_HSYNC 75 /* In */
#define GPIO_WS007SH_SLIDE 104 /* In */
#define GPIO_WS007SH_SD_POWER 107 /* Out: H:ON, L:OFF */
/*
* WS011SH specific parameter
*/
/*
port I/O(Active) name desc
1 I(?) RESET_BTN button detect: reset (on: release, off:press)
9 I(?) PWR_BTN button detect: power-on (on: press, off:release)
21 I(?) TPANEL touch panel (on: release, off: press)
37 O USBH_PWR USB Host power (H: enable, L: disable)
41 I(L) USBH_DET USB Host cable detect (on: remove, off: insert)
48 I(L) SD_DET microSD card detect (on: remove, off: insert)
51 I(?) SLIDE LCD slider (on: open, off: close)
52 I(?) KEYLOCK key lock slider (on: unlock, off:lock)
57 I(?) EXCRWAL_DET
81 I(L) EPDET earphone adapter detect (on: remove, off: insert)
91 I(?) FULLKEYBOARD?
96 I(?) JACKET_DET jacket detect (on: close, off: open)
?105 I(?) WSIM_DET W-SIM detect (on: insert, off: remove)
?106 I(?) WSIM? (same as GPIO#105?)
107 O(?) SD_PWR: SD Card power (on: on, off: off)
115 I(H) ACDET AC adapter detect (on: insert, off: remove)
116 I(?) USBC_DET USB Client cable detect (on: insert, off: remove)
*/
#define GPIO_WS011SH_RESET_BUTTON 1 /* In */
#define GPIO_WS011SH_POWER_BUTTON 9 /* In */
#define GPIO_WS011SH_KEYPAD 14 /* In */
#define GPIO_WS011SH_TOUCH_PANEL 21 /* In */
#define GPIO_WS011SH_AK4184_CS 33 /* Out */
#define GPIO_WS011SH_USB_HOST_POWER 37 /* Out */
#define GPIO_WS011SH_USB_HOST_DETECT 41 /* In */
#define GPIO_WS011SH_SD_DETECT 48 /* In */
#define GPIO_WS011SH_SLIDE 51 /* In */
#define GPIO_WS011SH_KEY_LOCK 52 /* In */
#define GPIO_WS011SH_HSYNC 75 /* In */
#define GPIO_WS011SH_SD_POWER 107 /* Out */
#define GPIO_WS011SH_USB_CLIENT_DETECT 116 /* In */
/*
* WS020SH specific parameter
*/
#define GPIO_WS020SH_RESET_BUTTON 1 /* In */
#define GPIO_WS020SH_TOUCH_PANEL 21 /* In */
#define GPIO_WS020SH_USB_HOST_DETECT 41 /* In */
#define GPIO_WS020SH_SD_DETECT 48 /* In */
#define GPIO_WS020SH_SLIDE 51 /* In */
#define GPIO_WS020SH_KEY_LOCK 52 /* In */
#define GPIO_WS020SH_POWER_BUTTON 55 /* In */
#define GPIO_WS020SH_SD_POWER 107 /* Out */
#define GPIO_WS020SH_USB_CLIENT_DETECT 116 /* In */
#endif /* _HPCARM_DEV_WZERO3_REG_H_ */