/* $NetBSD: adm1021.c,v 1.19 2018/06/26 06:03:57 thorpej Exp $ */
/* $OpenBSD: adm1021.c,v 1.27 2007/06/24 05:34:35 dlg Exp $ */
/*
* Copyright (c) 2005 Theo de Raadt
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*
* Driver for ADM1021 and compatible temperature sensors, including ADM1021,
* ADM1021A, ADM1023, ADM1032, GL523SM, G781, LM84, MAX1617, MAX1617A,
* NE1617A, MAX6642 and Xeon embedded temperature sensors.
*
* Some sensors differ from the ADM1021/MAX1617/NE1617A:
* ADM1021A ADM1023 ADM1032 G781 LM84 MAX1617A MAX6642
* company/revision reg X X X X X X
* no negative temps X X X X
* 11-bit remote temp X X X X
* no low limits X X
* therm (high) limits X X X
*
* Registers 0x00 to 0x0f have separate read/write addresses, but
* registers 0x10 and above have the same read/write address.
* The 11-bit (extended) temperature consists of a separate register with
* 3 valid bits that are always added to the external temperature (even if
* the temperature is negative).
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: adm1021.c,v 1.19 2018/06/26 06:03:57 thorpej Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <dev/sysmon/sysmonvar.h>
#include <dev/i2c/i2cvar.h>
#ifdef macppc
#define HAVE_OF 1
#endif
#ifdef HAVE_OF
#include <dev/ofw/openfirm.h>
#endif
/* Registers */
#define ADM1021_INT_TEMP 0x00 /* Internal temperature value */
#define ADM1021_EXT_TEMP 0x01 /* External temperature value */
#define ADM1021_STATUS 0x02 /* Status */
#define ADM1021_CONFIG_READ 0x03 /* Read configuration */
#define ADM1021_CONV_RATE_READ 0x04 /* Read conversion rate */
#define ADM1021_INT_HIGH_READ 0x05 /* Read internal high limit */
#define ADM1021_INT_LOW_READ 0x06 /* Read internal low limit */
#define ADM1021_EXT_HIGH_READ 0x07 /* Read external high limit */
#define ADM1021_EXT_LOW_READ 0x08 /* Read external low limit */
#define ADM1021_CONFIG_WRITE 0x09 /* Write configuration */
#define ADM1021_CONV_RATE_WRITE 0x0a /* Write conversion rate */
#define ADM1021_INT_HIGH_WRITE 0x0b /* Write internal high limit */
#define ADM1021_INT_LOW_WRITE 0x0c /* Write internal low limit */
#define ADM1021_EXT_HIGH_WRITE 0x0d /* Write external high limit */
#define ADM1021_EXT_LOW_WRITE 0x0e /* Write external low limit */
#define ADM1021_ONE_SHOT 0x0f /* One shot command */
#define ADM1023_EXT_TEMP2 0x10 /* R/W external temp low byte */
#define ADM1023_EXT_TEMP_OFF 0x11 /* R/W external temp offset */
#define ADM1023_EXT_TEMP_OFF2 0x12 /* R/W external temp off low byte */
#define ADM1023_EXT_HIGH2 0x13 /* R/W external high lim low byte */
#define ADM1023_EXT_LOW2 0x14 /* R/W external low lim low byte */
#define ADM1032_EXT_THERM 0x19 /* R/W external Therm (high) limit */
#define ADM1032_INT_THERM 0x20 /* R/W internal Therm (high) limit */
#define ADM1032_THERM_HYST 0x21 /* R/W Therm hysteris */
#define ADM1032_ALERT_QUEUE 0x22 /* R/W consecutive alert queue */
#define ADM1021_COMPANY 0xfe /* Company ID */
#define ADM1021_DIE_REVISION 0xff /* Die revision code */
/* Register values */
#define ADM1021_CONFIG_RUN 0x40
#define ADM1021_STATUS_INVAL 0x7f
#define ADM1021_STATUS_NOEXT 0x40 /* External diode is open-circuit */
#define ADM1023_EXT2_SHIFT 5
#define ADM1023_EXT2_MASK 0x07
#define ADM1021_COMPANY_ADM 0x41 /* 'A' */
#define ADM1021_COMPANY_GMT 0x47 /* 'G' */
#define ADM1021_COMPANY_MAXIM 0x4d /* 'M' */
#define ADM1021_REV_1021 0x00
#define ADM1021_REV_1021A 0x30
#define ADM1021_REV_MASK 0xf0
/* Sensors */
#define ADMTEMP_INT 0
#define ADMTEMP_EXT 1
#define ADMTEMP_NUM_SENSORS 2
#define ADMTEMP_MAX_NEG -65
#define ADMTEMP_MAX_POS 127
#define ADMTEMP_LOW_DEFAULT 0xc9 /* (-55) */
/* Limit registers might read 0xff, so we ignore them if they do */
#define ADMTEMP_LIM_INVAL -1 /* 0xff */
#define ADMTEMP_NAMELEN 9 /* Maximum name length + 1 */
struct admtemp_softc {
i2c_tag_t sc_tag;
i2c_addr_t sc_addr;
int sc_flags;
int sc_noexternal, sc_noneg, sc_nolow;
int sc_ext11, sc_therm;
struct sysmon_envsys *sc_sme;
envsys_data_t sc_sensor[ADMTEMP_NUM_SENSORS];
int sc_setdef[ADMTEMP_NUM_SENSORS];
uint8_t sc_highlim[ADMTEMP_NUM_SENSORS];
uint8_t sc_lowlim[ADMTEMP_NUM_SENSORS];
uint8_t sc_highlim2, sc_lowlim2;
uint8_t sc_thermlim[ADMTEMP_NUM_SENSORS];
};
int admtemp_match(device_t, cfdata_t, void *);
void admtemp_attach(device_t, device_t, void *);
void admtemp_refresh(struct sysmon_envsys *, envsys_data_t *);
void admtemp_getlim_1021(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
void admtemp_getlim_1023(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
void admtemp_getlim_1032(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
void admtemp_setlim_1021(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
void admtemp_setlim_1023(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
void admtemp_setlim_1032(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
CFATTACH_DECL_NEW(admtemp, sizeof(struct admtemp_softc),
admtemp_match, admtemp_attach, NULL, NULL);
/* XXX: add flags for compats to admtemp_setflags() */
static const struct device_compatible_entry compat_data[] = {
{ "i2c-max1617", 0 },
{ "max6642", 0 },
{ "max6690", 0 },
{ NULL, 0 }
};
int
admtemp_match(device_t parent, cfdata_t match, void *aux)
{
struct i2c_attach_args *ia = aux;
int match_result;
if (iic_use_direct_match(ia, match, compat_data, &match_result))
return match_result;
/*
* Indirect config - not much we can do!
* Check typical addresses.
*/
if (((ia->ia_addr >= 0x18) && (ia->ia_addr <= 0x1a)) ||
((ia->ia_addr >= 0x29) && (ia->ia_addr <= 0x2b)) ||
((ia->ia_addr >= 0x48) && (ia->ia_addr <= 0x4e)))
return I2C_MATCH_ADDRESS_ONLY;
return 0;
}
static int
admtemp_exec(struct admtemp_softc *sc, i2c_op_t op, uint8_t *cmd,
uint8_t *data)
{
return iic_exec(sc->sc_tag, op, sc->sc_addr, cmd, sizeof(*cmd), data,
sizeof(*data), 0);
}
/*
* Set flags based on chip type for direct config, or by testing for
* indirect config.
*
* LM84, MAX1617, and NE1617A don't have company/revision registers.
* If we can't read the company register, we'll check the
* internal low limit to see if we have an LM84.
*
* To check if an ADM chip has 11-bit sensors, we'll write 0.125
* to the external temperature limit low byte register and read it
* back (because we can't tell from the id/rev).
*
* To check if an ADM chip has a Therm output, we check that we
* read 0x55 (default value) from the external therm limit.
*
* If an ADM chip doesn't have 11-bit sensors, check the revision to
* determine if it handles negative temperatures.
*/
static void
admtemp_setflags(struct admtemp_softc *sc, struct i2c_attach_args *ia,
uint8_t* comp, uint8_t *rev, char* name)
{
uint8_t cmd, data, tmp;
int i;
*comp = 0;
*rev = 0;
cmd = ADM1021_COMPANY;
admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, comp);
cmd = ADM1021_DIE_REVISION;
admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, rev);
sc->sc_noneg = 1;
sc->sc_nolow = 0;
sc->sc_ext11 = 0;
sc->sc_therm = 0;
/* Direct config */
for (i = 0; i < ia->ia_ncompat; i++) {
if (strcmp("i2c-max1617", ia->ia_compat[i]) == 0) {
sc->sc_noneg = 0;
strlcpy(name, "MAX1617A", ADMTEMP_NAMELEN);
return;
}
if (strcmp("max6642", ia->ia_compat[i]) == 0) {
sc->sc_noneg = 0;
sc->sc_nolow = 1;
strlcpy(name, "MAX6642", ADMTEMP_NAMELEN);
return;
}
if (strcmp("max6690", ia->ia_compat[i]) == 0) {
sc->sc_noneg = 0;
sc->sc_ext11 = 1;
strlcpy(name, "MAX6690", ADMTEMP_NAMELEN);
return;
}
}
/* Indirect config */
if (*comp == 0) {
sc->sc_noneg = 0;
cmd = ADM1021_INT_LOW_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, comp) == 0 &&
*comp != ADMTEMP_LOW_DEFAULT) {
sc->sc_nolow = 1;
strlcpy(name, "LM84", ADMTEMP_NAMELEN);
} else
strlcpy(name, "MAX1617", ADMTEMP_NAMELEN);
}
if (*comp == ADM1021_COMPANY_MAXIM) {
sc->sc_noneg = 0;
/*
* MAX6642 doesn't have a revision register
* XXX this works only on macppc with iic at pmu because the
* pmu doesn't return an error for nonexistant registers, it
* just repeats previous data
*/
if (*comp == *rev) {
sc->sc_therm = 0; /* */
sc->sc_nolow = 1;
strlcpy(name, "MAX6642", ADMTEMP_NAMELEN);
} else if (*rev == 0) {
strlcpy(name, "MAX6690", ADMTEMP_NAMELEN);
sc->sc_ext11 = 1;
} else {
strlcpy(name, "MAX1617A", ADMTEMP_NAMELEN);
}
}
if (*comp == ADM1021_COMPANY_GMT) {
sc->sc_ext11 = 1;
sc->sc_therm = 1;
strlcpy(name, "G781", ADMTEMP_NAMELEN);
}
if (*comp == ADM1021_COMPANY_ADM) {
cmd = ADM1023_EXT_HIGH2;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &data) == 0) {
tmp = 1 << ADM1023_EXT2_SHIFT;
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &tmp);
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd,
&tmp) == 0 && tmp == 1 << ADM1023_EXT2_SHIFT) {
sc->sc_ext11 = 1;
strlcpy(name, "ADM1023", ADMTEMP_NAMELEN);
}
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &data);
}
cmd = ADM1032_EXT_THERM;
if (sc->sc_ext11 &&
admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &data) == 0
&& data == 0x55) {
sc->sc_therm = 1;
strlcpy(name, "ADM1032", ADMTEMP_NAMELEN);
}
if (!sc->sc_ext11 &&
(*rev & ADM1021_REV_MASK) == ADM1021_REV_1021A) {
sc->sc_noneg = 0;
strlcpy(name, "ADM1021A", ADMTEMP_NAMELEN);
} else
strlcpy(name, "ADM1021", ADMTEMP_NAMELEN);
}
}
void
admtemp_attach(device_t parent, device_t self, void *aux)
{
struct admtemp_softc *sc = device_private(self);
struct i2c_attach_args *ia = aux;
uint8_t cmd, data, stat, comp, rev;
char name[ADMTEMP_NAMELEN];
#ifdef HAVE_OF
char ename[64], iname[64];
int ch;
#endif
sc->sc_tag = ia->ia_tag;
sc->sc_addr = ia->ia_addr;
iic_acquire_bus(sc->sc_tag, 0);
cmd = ADM1021_CONFIG_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &data) != 0) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self, "cannot get control register\n");
return;
}
if (data & ADM1021_CONFIG_RUN) {
cmd = ADM1021_STATUS;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &stat)) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self,
"cannot read status register\n");
return;
}
if ((stat & ADM1021_STATUS_INVAL) == ADM1021_STATUS_INVAL) {
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd,
&stat)) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self,
"cannot read status register\n");
return;
}
}
/* means external is dead */
if ((stat & ADM1021_STATUS_INVAL) != ADM1021_STATUS_INVAL &&
(stat & ADM1021_STATUS_NOEXT))
sc->sc_noexternal = 1;
data &= ~ADM1021_CONFIG_RUN;
cmd = ADM1021_CONFIG_WRITE;
if (admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &data)) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self,
"cannot set control register\n");
return;
}
}
admtemp_setflags(sc, ia, &comp, &rev, name);
iic_release_bus(sc->sc_tag, 0);
aprint_normal(": %s temperature sensor", name);
if (comp)
aprint_normal(": id. 0x%02x, rev. 0x%02x\n", comp, rev);
else
aprint_normal("\n");
aprint_naive(": Temperature sensor\n");
/* Initialize sensor data. */
sc->sc_sensor[ADMTEMP_INT].state = ENVSYS_SINVALID;
sc->sc_sensor[ADMTEMP_INT].units = ENVSYS_STEMP;
sc->sc_sensor[ADMTEMP_EXT].state = ENVSYS_SINVALID;
sc->sc_sensor[ADMTEMP_EXT].units = ENVSYS_STEMP;
sc->sc_sensor[ADMTEMP_INT].flags = ENVSYS_FMONLIMITS;
sc->sc_sensor[ADMTEMP_EXT].flags = ENVSYS_FMONLIMITS;
#ifdef HAVE_OF
strcpy(iname, "internal");
strcpy(ename, "external");
ch = OF_child(ia->ia_cookie);
if (ch != 0) {
OF_getprop(ch, "location", iname, 64);
ch = OF_peer(ch);
if (ch != 0) {
OF_getprop(ch, "location", ename, 64);
}
}
strlcpy(sc->sc_sensor[ADMTEMP_INT].desc, iname,
sizeof(sc->sc_sensor[ADMTEMP_INT].desc));
strlcpy(sc->sc_sensor[ADMTEMP_EXT].desc, ename,
sizeof(sc->sc_sensor[ADMTEMP_EXT].desc));
#else
strlcpy(sc->sc_sensor[ADMTEMP_INT].desc, "internal",
sizeof(sc->sc_sensor[ADMTEMP_INT].desc));
strlcpy(sc->sc_sensor[ADMTEMP_EXT].desc, "external",
sizeof(sc->sc_sensor[ADMTEMP_EXT].desc));
#endif
sc->sc_sme = sysmon_envsys_create();
if (sysmon_envsys_sensor_attach(
sc->sc_sme, &sc->sc_sensor[ADMTEMP_INT])) {
sysmon_envsys_destroy(sc->sc_sme);
aprint_error_dev(self,
"unable to attach internal at sysmon\n");
return;
}
if (sc->sc_noexternal == 0 &&
sysmon_envsys_sensor_attach(
sc->sc_sme, &sc->sc_sensor[ADMTEMP_EXT])) {
sysmon_envsys_destroy(sc->sc_sme);
aprint_error_dev(self,
"unable to attach external at sysmon\n");
return;
}
sc->sc_sme->sme_name = device_xname(self);
sc->sc_sme->sme_cookie = sc;
sc->sc_sme->sme_refresh = admtemp_refresh;
if (sc->sc_therm) {
sc->sc_sme->sme_get_limits = admtemp_getlim_1032;
sc->sc_sme->sme_set_limits = admtemp_setlim_1032;
} else if (sc->sc_ext11) {
sc->sc_sme->sme_get_limits = admtemp_getlim_1023;
sc->sc_sme->sme_set_limits = admtemp_setlim_1023;
} else {
sc->sc_sme->sme_get_limits = admtemp_getlim_1021;
sc->sc_sme->sme_set_limits = admtemp_setlim_1021;
}
if (sysmon_envsys_register(sc->sc_sme)) {
aprint_error_dev(self,
"unable to register with sysmon\n");
sysmon_envsys_destroy(sc->sc_sme);
return;
}
}
void
admtemp_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
{
struct admtemp_softc *sc = sme->sme_cookie;
uint8_t cmd, xdata;
int8_t sdata;
iic_acquire_bus(sc->sc_tag, 0);
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_TEMP;
else
cmd = ADM1021_EXT_TEMP;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &sdata) == 0) {
if (sdata == ADM1021_STATUS_INVAL) {
edata->state = ENVSYS_SINVALID;
} else {
edata->value_cur = 273150000 + 1000000 * sdata;
edata->state = ENVSYS_SVALID;
}
}
if (edata->sensor == ADMTEMP_EXT && sc->sc_ext11) {
cmd = ADM1023_EXT_TEMP2;
admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &xdata);
edata->value_cur +=
(xdata >> ADM1023_EXT2_SHIFT & ADM1023_EXT2_MASK) * 125000;
}
iic_release_bus(sc->sc_tag, 0);
}
void
admtemp_getlim_1021(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
uint8_t cmd;
int8_t hdata = 0x7f, ldata = 0xc9;
*props &= ~(PROP_CRITMAX | PROP_CRITMIN);
iic_acquire_bus(sc->sc_tag, 0);
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_READ;
else
cmd = ADM1021_EXT_HIGH_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &hdata) == 0 &&
hdata != ADMTEMP_LIM_INVAL) {
limits->sel_critmax = 273150000 + 1000000 * hdata;
*props |= PROP_CRITMAX;
}
if (sc->sc_nolow == 1) {
goto release;
}
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_READ;
else
cmd = ADM1021_EXT_LOW_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &ldata) == 0 &&
ldata != ADMTEMP_LIM_INVAL) {
limits->sel_critmin = 273150000 + 1000000 * ldata;
*props |= PROP_CRITMIN;
}
release:
iic_release_bus(sc->sc_tag, 0);
/* Save the values if this is the first time through. */
if (sc->sc_setdef[edata->sensor] == 0) {
sc->sc_setdef[edata->sensor] = 1;
sc->sc_highlim[edata->sensor] = hdata;
sc->sc_lowlim[edata->sensor] = ldata;
}
}
void
admtemp_getlim_1023(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
uint8_t cmd, xhdata = 0, xldata = 0;
int8_t hdata = 0x7f, ldata = 0xc9;
*props &= ~(PROP_CRITMAX | PROP_CRITMIN);
iic_acquire_bus(sc->sc_tag, 0);
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_READ;
else
cmd = ADM1021_EXT_HIGH_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &hdata) == 0 &&
hdata != ADMTEMP_LIM_INVAL) {
limits->sel_critmax = 273150000 + 1000000 * hdata;
*props |= PROP_CRITMAX;
}
if (edata->sensor == ADMTEMP_EXT) {
cmd = ADM1023_EXT_HIGH2;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &xhdata) == 0)
limits->sel_critmax +=
(xhdata >> ADM1023_EXT2_SHIFT & ADM1023_EXT2_MASK)
* 125000;
}
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_READ;
else
cmd = ADM1021_EXT_LOW_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &ldata) == 0 &&
ldata != ADMTEMP_LIM_INVAL) {
limits->sel_critmin = 273150000 + 1000000 * ldata;
*props |= PROP_CRITMIN;
}
if (edata->sensor == ADMTEMP_EXT) {
cmd = ADM1023_EXT_LOW2;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &xldata) == 0)
limits->sel_critmin +=
(xldata >> ADM1023_EXT2_SHIFT & ADM1023_EXT2_MASK)
* 125000;
}
iic_release_bus(sc->sc_tag, 0);
/* Save the values if this is the first time through. */
if (sc->sc_setdef[edata->sensor] == 0) {
sc->sc_setdef[edata->sensor] = 1;
sc->sc_highlim[edata->sensor] = hdata;
sc->sc_lowlim[edata->sensor] = ldata;
if (edata->sensor == ADMTEMP_EXT) {
sc->sc_highlim2 = xhdata;
sc->sc_lowlim2 = xldata;
}
}
}
void
admtemp_getlim_1032(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
uint8_t cmd, xhdata = 0, xldata = 0;
int8_t tdata = 0x55, hdata = 0x55, ldata = 0;
*props &= ~(PROP_WARNMAX | PROP_CRITMAX | PROP_WARNMIN);
iic_acquire_bus(sc->sc_tag, 0);
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1032_INT_THERM;
else
cmd = ADM1032_EXT_THERM;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &tdata) == 0 &&
tdata != ADMTEMP_LIM_INVAL) {
limits->sel_critmax = 273150000 + 1000000 * tdata;
*props |= PROP_CRITMAX;
}
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_READ;
else
cmd = ADM1021_EXT_HIGH_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &hdata) == 0 &&
hdata != ADMTEMP_LIM_INVAL) {
limits->sel_warnmax = 273150000 + 1000000 * hdata;
*props |= PROP_WARNMAX;
}
if (edata->sensor == ADMTEMP_EXT) {
cmd = ADM1023_EXT_HIGH2;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &xhdata) == 0)
limits->sel_warnmax +=
(xhdata >> ADM1023_EXT2_SHIFT & ADM1023_EXT2_MASK)
* 125000;
}
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_READ;
else
cmd = ADM1021_EXT_LOW_READ;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &ldata) == 0 &&
ldata != ADMTEMP_LIM_INVAL) {
limits->sel_warnmin = 273150000 + 1000000 * ldata;
*props |= PROP_WARNMIN;
}
if (edata->sensor == ADMTEMP_EXT) {
cmd = ADM1023_EXT_LOW2;
if (admtemp_exec(sc, I2C_OP_READ_WITH_STOP, &cmd, &xldata) == 0)
limits->sel_warnmin +=
(xldata >> ADM1023_EXT2_SHIFT & ADM1023_EXT2_MASK)
* 125000;
}
iic_release_bus(sc->sc_tag, 0);
/* Save the values if this is the first time through. */
if (sc->sc_setdef[edata->sensor] == 0) {
sc->sc_setdef[edata->sensor] = 1;
sc->sc_thermlim[edata->sensor] = tdata;
sc->sc_highlim[edata->sensor] = hdata;
sc->sc_lowlim[edata->sensor] = ldata;
if (edata->sensor == ADMTEMP_EXT) {
sc->sc_highlim2 = xhdata;
sc->sc_lowlim2 = xldata;
}
}
}
void
admtemp_setlim_1021(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
uint8_t cmd;
int tmp;
int8_t sdata;
iic_acquire_bus(sc->sc_tag, 0);
if (*props & PROP_CRITMAX) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_WRITE;
else
cmd = ADM1021_EXT_HIGH_WRITE;
if (limits == NULL) /* Restore defaults */
sdata = sc->sc_highlim[edata->sensor];
else {
tmp = (limits->sel_critmax - 273150000) / 1000000;
if (tmp > ADMTEMP_MAX_POS)
sdata = ADMTEMP_MAX_POS;
else if (tmp < 0 && sc->sc_noneg)
sdata = 0;
else if (tmp < ADMTEMP_MAX_NEG)
sdata = ADMTEMP_MAX_NEG;
else
sdata = tmp & 0xff;
}
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
}
if (*props & PROP_CRITMIN && sc->sc_nolow == 0) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_WRITE;
else
cmd = ADM1021_EXT_LOW_WRITE;
if (limits == NULL)
sdata = sc->sc_lowlim[edata->sensor];
else {
tmp = (limits->sel_critmin - 273150000) / 1000000;
if (tmp > ADMTEMP_MAX_POS)
sdata = ADMTEMP_MAX_POS;
else if (tmp < 0 && sc->sc_noneg)
sdata = 0;
else if (tmp < ADMTEMP_MAX_NEG)
sdata = ADMTEMP_MAX_NEG;
else
sdata = tmp & 0xff;
}
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
}
iic_release_bus(sc->sc_tag, 0);
}
static void
admtemp_encode_temp(const uint32_t val, int8_t *sdata, uint8_t *xdata,
const int ext11)
{
int32_t tmp;
if (ext11) {
/* Split temperature into high and low bytes */
tmp = (val - 273150000) / 125000;
*xdata = (tmp & ADM1023_EXT2_MASK) << ADM1023_EXT2_SHIFT;
tmp -= (int32_t) (*xdata >> ADM1023_EXT2_SHIFT);
tmp /= 8; /* 1000000 / 125000 */
} else {
*xdata = 0;
tmp = (val - 273150000) / 1000000;
}
if (tmp > ADMTEMP_MAX_POS)
*sdata = ADMTEMP_MAX_POS;
else if (tmp < 0)
*sdata = 0;
else
*sdata = tmp & 0xff;
}
void
admtemp_setlim_1023(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
int ext11;
uint8_t cmd, xdata;
int8_t sdata;
if (edata->sensor == ADMTEMP_INT)
ext11 = 0;
else
ext11 = 1;
iic_acquire_bus(sc->sc_tag, 0);
if (*props & PROP_CRITMAX) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_WRITE;
else
cmd = ADM1021_EXT_HIGH_WRITE;
if (limits == NULL) { /* Restore defaults */
sdata = sc->sc_highlim[edata->sensor];
xdata = sc->sc_highlim2;
} else
admtemp_encode_temp(limits->sel_critmax, &sdata,
&xdata, ext11);
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
if (ext11) {
cmd = ADM1023_EXT_HIGH2;
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &xdata);
}
}
if (*props & PROP_CRITMIN) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_WRITE;
else
cmd = ADM1021_EXT_LOW_WRITE;
if (limits == NULL) {
sdata = sc->sc_lowlim[edata->sensor];
xdata = sc->sc_lowlim2;
} else
admtemp_encode_temp(limits->sel_critmax, &sdata,
&xdata, ext11);
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
if (ext11) {
cmd = ADM1023_EXT_LOW2;
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &xdata);
}
}
iic_release_bus(sc->sc_tag, 0);
}
void
admtemp_setlim_1032(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct admtemp_softc *sc = sme->sme_cookie;
int ext11;
uint8_t cmd, xdata;
int8_t sdata;
if (edata->sensor == ADMTEMP_INT)
ext11 = 0;
else
ext11 = 1;
iic_acquire_bus(sc->sc_tag, 0);
if (*props & PROP_CRITMAX) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1032_INT_THERM;
else
cmd = ADM1032_EXT_THERM;
if (limits == NULL) /* Restore default */
sdata = sc->sc_thermlim[edata->sensor];
else
admtemp_encode_temp(limits->sel_critmax, &sdata,
&xdata, 0);
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
}
if (*props & PROP_WARNMAX) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_HIGH_WRITE;
else
cmd = ADM1021_EXT_HIGH_WRITE;
if (limits == NULL) { /* Restore defaults */
sdata = sc->sc_highlim[edata->sensor];
xdata = sc->sc_highlim2;
} else
admtemp_encode_temp(limits->sel_warnmax, &sdata,
&xdata, ext11);
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
if (ext11) {
cmd = ADM1023_EXT_HIGH2;
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &xdata);
}
}
if (*props & PROP_WARNMIN) {
if (edata->sensor == ADMTEMP_INT)
cmd = ADM1021_INT_LOW_WRITE;
else
cmd = ADM1021_EXT_LOW_WRITE;
if (limits == NULL) {
sdata = sc->sc_lowlim[edata->sensor];
xdata = sc->sc_lowlim2;
} else
admtemp_encode_temp(limits->sel_warnmin, &sdata,
&xdata, ext11);
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &sdata);
if (ext11) {
cmd = ADM1023_EXT_LOW2;
admtemp_exec(sc, I2C_OP_WRITE_WITH_STOP, &cmd, &xdata);
}
}
iic_release_bus(sc->sc_tag, 0);
}