Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /sys/dev/ic/cyvar.h 
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
/*	$NetBSD: cyvar.h,v 1.9 2008/03/26 17:50:32 matt Exp $	*/

/*
 * cy_var.h
 *
 * Driver for Cyclades Cyclom-8/16/32 multiport serial cards
 * (currently not tested with Cyclom-32 cards)
 *
 * Timo Rossi, 1996
 *
 * Supports both ISA and PCI Cyclom cards
 */

/* #define CY_DEBUG */
#define CY_DEBUG1

/*
 * Maximum number of ports per card
 */
#define	CY_MAX_PORTS		(CD1400_NO_OF_CHANNELS * CY_MAX_CD1400s)

#define CY_RX_FIFO_THRESHOLD  6

/*
 * Automatic RTS (or actually DTR, the RTS and DTR lines need to be
 * exchanged) handshake threshold used if CY_HW_RTS is defined
 */
#define CY_RX_DTR_THRESHOLD   9

/*
 * read/write cd1400 registers (when sc_softc-structure is available)
 */
#define cd_read_reg(sc,chip,reg) bus_space_read_1(sc->sc_memt, \
    sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
    (((reg << 1)) << sc->sc_bustype))

#define cd_write_reg(sc,chip,reg,val) bus_space_write_1(sc->sc_memt, \
    sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
    (((reg << 1))<< sc->sc_bustype), (val))

/*
 * ibuf is a simple ring buffer. It is always used two
 * bytes at a time (status and data)
 */
#define CY_IBUF_SIZE (2*512)

/* software state for one port */
struct cy_port {
	struct cy_softc *cy_softc;
	int             cy_port_num;
	int             cy_chip;
	int             cy_clock;
	struct tty     *cy_tty;
	int             cy_openflags;
	int             cy_fifo_overruns;
	int             cy_ibuf_overruns;
	u_char          cy_channel_control;	/* last CCR channel control
						 * command bits */
	u_char          cy_carrier_stat;	/* copied from MSVR2 */
	u_char          cy_flags;
	u_char         *cy_ibuf, *cy_ibuf_end;
	u_char         *cy_ibuf_rd_ptr, *cy_ibuf_wr_ptr;
#ifdef CY_DEBUG1
	int             cy_rx_int_count;
	int             cy_tx_int_count;
	int             cy_modem_int_count;
	int             cy_start_count;
#endif /* CY_DEBUG1 */
};

#define CY_F_CARRIER_CHANGED  0x01
#define CY_F_START_BREAK      0x02
#define CY_F_END_BREAK        0x04
#define CY_F_STOP             0x08
#define CY_F_SEND_NUL         0x10
#define CY_F_START            0x20

/* software state for one card */
struct cy_softc {
	device_t	sc_dev;
	void           *sc_ih;
	bus_space_tag_t sc_memt;
	bus_space_handle_t sc_bsh;
	int             sc_bustype;
	int		sc_nchips;	/* Number of cd1400's on this card */
	int             sc_cd1400_offs[CY_MAX_CD1400s];
	struct cy_port  sc_ports[CY_MAX_PORTS];
	int		sc_nchannels;	/* total number of ports */
#ifdef CY_DEBUG1
	int             sc_poll_count1;
	int             sc_poll_count2;
#endif
};

int	cy_find(struct cy_softc *);
void	cy_attach(struct cy_softc *);
int	cy_intr(void *);