/* $NetBSD: rgephyreg.h,v 1.12 2019/02/25 06:59:37 msaitoh Exp $ */ /* * Copyright (c) 2003 * Bill Paul <wpaul@windriver.com>. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: /repoman/r/ncvs/src/sys/dev/mii/rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $ */ #ifndef _DEV_MII_RGEPHYREG_H_ #define _DEV_MII_RGEPHYREG_H_ #define RGEPHY_8211B 2 #define RGEPHY_8211C 3 #define RGEPHY_8211D 4 #define RGEPHY_8211E 5 #define RGEPHY_8211F 6 /* * RealTek 8169S/8110S gigE PHY registers */ /* RTL8211B(L)/RTL8211C(L) */ #define RGEPHY_MII_SSR 0x11 /* PHY Specific status register */ #define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */ #define RGEPHY_SSR_S100 0x4000 /* 100Mbps */ #define RGEPHY_SSR_S10 0x0000 /* 10Mbps */ #define RGEPHY_SSR_SPD_MASK 0xc000 #define RGEPHY_SSR_FDX 0x2000 /* full duplex */ #define RGEPHY_SSR_PAGE_RECEIVED 0x1000 /* new page received */ #define RGEPHY_SSR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */ #define RGEPHY_SSR_LINK 0x0400 /* link up */ #define RGEPHY_SSR_MDI_XOVER 0x0040 /* MDI crossover */ #define RGEPHY_SSR_ALDPS 0x0008 /* RTL8211C(L) only */ #define RGEPHY_SSR_JABBER 0x0001 /* Jabber */ /* RTL8211F */ #define RGEPHY_MII_PHYCR1 0x18 /* PHY Specific control register 1 */ #define RGEPHY_PHYCR1_MDI_MMCE __BIT(9) #define RGEPHY_PHYCR1_ALDPS_EN __BIT(2) #define RGEPHY_MII_PHYSR 0x1a /* PHY Specific status register */ #define RGEPHY_PHYSR_ALDPS __BIT(14) #define RGEPHY_PHYSR_MDI_PLUG __BIT(13) #define RGEPHY_PHYSR_NWAY_EN __BIT(12) #define RGEPHY_PHYSR_MASTER __BIT(11) #define RGEPHY_PHYSR_EEE __BIT(8) #define RGEPHY_PHYSR_RXFLOW_EN __BIT(7) #define RGEPHY_PHYSR_TXFLOW_EN __BIT(6) #define RGEPHY_PHYSR_SPEED __BITS(5,4) #define RGEPHY_PHYSR_SPEED_10 0 #define RGEPHY_PHYSR_SPEED_100 1 #define RGEPHY_PHYSR_SPEED_1000 2 #define RGEPHY_PHYSR_DUPLEX __BIT(3) #define RGEPHY_PHYSR_LINK __BIT(2) #define RGEPHY_PHYSR_MDI_XOVER __BIT(1) #define RGEPHY_PHYSR_JABBER __BIT(0) #endif /* _DEV_MII_RGEPHYREG_H_ */ |