/* $NetBSD: dwc2.h,v 1.10 2018/08/27 17:13:07 riastradh Exp $ */
/*-
* Copyright (c) 2013 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Nick Hudson
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _EXTERNAL_BSD_DWC2_DWC2_H_
#define _EXTERNAL_BSD_DWC2_DWC2_H_
#include <sys/param.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/workqueue.h>
#include <linux/list.h>
#include <linux/workqueue.h>
#include "opt_usb.h"
// #define VERBOSE_DEBUG
// #define DWC2_DUMP_FRREM
// #define CONFIG_USB_DWC2_TRACK_MISSED_SOFS
#define CONFIG_USB_DWC2_HOST 1
#define CONFIG_USB_DWC2_DUAL_ROLE 0
#define CONFIG_USB_DWC2_PERIPHERAL 0
typedef int irqreturn_t;
#define IRQ_NONE 0
#define IRQ_HANDLED 1
#define u8 uint8_t
#define u16 uint16_t
#define s16 int16_t
#define u32 uint32_t
#define u64 uint64_t
#define dma_addr_t bus_addr_t
#define DWC2_READ_4(hsotg, reg) \
bus_space_read_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg))
#define DWC2_WRITE_4(hsotg, reg, data) \
bus_space_write_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg), (data));
#ifdef DWC2_DEBUG
extern int dwc2debug;
#define WARN_ON(x) KASSERT(!(x))
#define dev_info(d,fmt,...) do { \
printf("%s: " fmt, device_xname(d), \
## __VA_ARGS__); \
} while (0)
#define dev_warn(d,fmt,...) do { \
printf("%s: " fmt, device_xname(d), \
## __VA_ARGS__); \
} while (0)
#define dev_err(d,fmt,...) do { \
printf("%s: " fmt, device_xname(d), \
## __VA_ARGS__); \
} while (0)
#define dev_dbg(d,fmt,...) do { \
if (dwc2debug >= 1) { \
printf("%s: " fmt, device_xname(d), \
## __VA_ARGS__); \
} \
} while (0)
#define dev_vdbg(d,fmt,...) do { \
if (dwc2debug >= 2) { \
printf("%s: " fmt, device_xname(d), \
## __VA_ARGS__); \
} \
} while (0)
#else
#define WARN_ON(x)
#define dev_info(...) do { } while (0)
#define dev_warn(...) do { } while (0)
#define dev_err(...) do { } while (0)
#define dev_dbg(...) do { } while (0)
#define dev_vdbg(...) do { } while (0)
#endif
#define jiffies hardclock_ticks
#define msecs_to_jiffies mstohz
enum usb_otg_state {
OTG_STATE_RESERVED = 0,
OTG_STATE_A_HOST,
OTG_STATE_A_PERIPHERAL,
OTG_STATE_A_SUSPEND,
OTG_STATE_B_HOST,
OTG_STATE_B_PERIPHERAL,
};
#define usleep_range(l, u) do { DELAY(u); } while (0)
#define spinlock_t kmutex_t
#define spin_lock_init(lock) mutex_init(lock, MUTEX_DEFAULT, IPL_VM)
#define spin_lock(l) do { mutex_spin_enter(l); } while (0)
#define spin_unlock(l) do { mutex_spin_exit(l); } while (0)
#define spin_lock_irqsave(l, f) \
do { mutex_spin_enter(l); (void)(f); } while (0)
#define spin_unlock_irqrestore(l, f) \
do { mutex_spin_exit(l); (void)(f); } while (0)
#define IRQ_RETVAL(r) (r)
#define USB_ENDPOINT_XFER_CONTROL UE_CONTROL /* 0 */
#define USB_ENDPOINT_XFER_ISOC UE_ISOCHRONOUS /* 1 */
#define USB_ENDPOINT_XFER_BULK UE_BULK /* 2 */
#define USB_ENDPOINT_XFER_INT UE_INTERRUPT /* 3 */
#define USB_DIR_IN UE_DIR_IN
#define USB_DIR_OUT UE_DIR_OUT
#define USB_PORT_FEAT_CONNECTION UHF_PORT_CONNECTION
#define USB_PORT_FEAT_ENABLE UHF_PORT_ENABLE
#define USB_PORT_FEAT_SUSPEND UHF_PORT_SUSPEND
#define USB_PORT_FEAT_OVER_CURRENT UHF_PORT_OVER_CURRENT
#define USB_PORT_FEAT_RESET UHF_PORT_RESET
// #define USB_PORT_FEAT_L1 5 /* L1 suspend */
#define USB_PORT_FEAT_POWER UHF_PORT_POWER
#define USB_PORT_FEAT_LOWSPEED UHF_PORT_LOW_SPEED
#define USB_PORT_FEAT_C_CONNECTION UHF_C_PORT_CONNECTION
#define USB_PORT_FEAT_C_ENABLE UHF_C_PORT_ENABLE
#define USB_PORT_FEAT_C_SUSPEND UHF_C_PORT_SUSPEND
#define USB_PORT_FEAT_C_OVER_CURRENT UHF_C_PORT_OVER_CURRENT
#define USB_PORT_FEAT_C_RESET UHF_C_PORT_RESET
#define USB_PORT_FEAT_TEST UHF_PORT_TEST
#define USB_PORT_FEAT_INDICATOR UHF_PORT_INDICATOR
#define USB_PORT_FEAT_C_PORT_L1 UHF_C_PORT_L1
#define C_HUB_LOCAL_POWER UHF_C_HUB_LOCAL_POWER
#define C_HUB_OVER_CURRENT UHF_C_HUB_OVER_CURRENT
#define USB_REQ_GET_STATUS UR_GET_STATUS
#define USB_REQ_CLEAR_FEATURE UR_CLEAR_FEATURE
#define USB_REQ_SET_FEATURE UR_SET_FEATURE
#define USB_REQ_GET_DESCRIPTOR UR_GET_DESCRIPTOR
#define ClearHubFeature ((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_CLEAR_FEATURE)
#define ClearPortFeature ((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_CLEAR_FEATURE)
#define GetHubDescriptor ((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_DESCRIPTOR)
#define GetHubStatus ((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_STATUS)
#define GetPortStatus ((UT_READ_CLASS_OTHER << 8) | USB_REQ_GET_STATUS)
#define SetHubFeature ((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_SET_FEATURE)
#define SetPortFeature ((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_SET_FEATURE)
#define USB_PORT_STAT_CONNECTION UPS_CURRENT_CONNECT_STATUS
#define USB_PORT_STAT_ENABLE UPS_PORT_ENABLED
#define USB_PORT_STAT_SUSPEND UPS_SUSPEND
#define USB_PORT_STAT_OVERCURRENT UPS_OVERCURRENT_INDICATOR
#define USB_PORT_STAT_RESET UPS_RESET
#define USB_PORT_STAT_L1 UPS_PORT_L1
#define USB_PORT_STAT_POWER UPS_PORT_POWER
#define USB_PORT_STAT_LOW_SPEED UPS_LOW_SPEED
#define USB_PORT_STAT_HIGH_SPEED UPS_HIGH_SPEED
#define USB_PORT_STAT_TEST UPS_PORT_TEST
#define USB_PORT_STAT_INDICATOR UPS_PORT_INDICATOR
#define USB_PORT_STAT_C_CONNECTION UPS_C_CONNECT_STATUS
#define USB_PORT_STAT_C_ENABLE UPS_C_PORT_ENABLED
#define USB_PORT_STAT_C_SUSPEND UPS_C_SUSPEND
#define USB_PORT_STAT_C_OVERCURRENT UPS_C_OVERCURRENT_INDICATOR
#define USB_PORT_STAT_C_RESET UPS_C_PORT_RESET
#define USB_PORT_STAT_C_L1 UPS_C_PORT_L1
#define USB_DT_HUB UDESC_HUB
/* See USB 2.0 spec Table 11-13, offset 3 */
#define HUB_CHAR_LPSM UHD_PWR
#define HUB_CHAR_COMMON_LPSM UHD_PWR_GANGED
#define HUB_CHAR_INDV_PORT_LPSM UHD_PWR_INDIVIDUAL
#define HUB_CHAR_NO_LPSM UHD_PWR_NO_SWITCH
#define HUB_CHAR_COMPOUND UHD_COMPOUND
#define HUB_CHAR_OCPM UHD_OC
#define HUB_CHAR_COMMON_OCPM UHD_OC_GLOBAL
#define HUB_CHAR_INDV_PORT_OCPM UHD_OC_INDIVIDUAL
#define HUB_CHAR_NO_OCPM UHD_OC_NONE
#define HUB_CHAR_TTTT UHD_TT_THINK
#define HUB_CHAR_PORTIND UHD_PORT_IND
enum usb_dr_mode {
USB_DR_MODE_UNKNOWN,
USB_DR_MODE_HOST,
USB_DR_MODE_PERIPHERAL,
USB_DR_MODE_OTG,
};
struct usb_phy;
struct usb_hcd;
static inline int
usb_phy_set_suspend(struct usb_phy *x, int suspend)
{
return 0;
}
static inline void
usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;
}
static inline int
usb_disabled(void)
{
return 0;
}
static inline void
udelay(unsigned long usecs)
{
DELAY(usecs);
}
static inline void
ndelay(unsigned long nsecs)
{
DELAY(nsecs / 1000);
}
static inline void
msleep(unsigned int msec)
{
if (cold ||
((hz < 1000) && (msec < (1000/hz))))
udelay(msec * 1000);
else
(void)kpause("mdelay", false, mstohz(msec), NULL);
}
#define EREMOTEIO EIO
#define ECOMM EIO
#define ENOTSUPP ENOTSUP
#define NS_TO_US(ns) ((ns + 500L) / 1000L)
#define USB_RESUME_TIMEOUT 40 /* ms */
#endif