/* $NetBSD: ite_rb.c,v 1.11 2011/02/10 12:46:22 tsutsui Exp $ */
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: ite_rb.c 1.6 92/01/20$
*
* @(#)ite_rb.c 8.1 (Berkeley) 6/10/93
*/
#ifdef ITECONSOLE
#include <sys/param.h>
#include <hp300/stand/common/itereg.h>
#include <hp300/stand/common/grf_rbreg.h>
#include <hp300/stand/common/samachdep.h>
#include <hp300/stand/common/itevar.h>
void rbox_windowmove(struct ite_data *, int, int, int, int, int, int, int);
void
rbox_init(struct ite_data *ip)
{
struct rboxfb *regbase = (void *)ip->regbase;
int i;
ip->bmv = rbox_windowmove;
rb_waitbusy(regbase);
DELAY(3000);
regbase->interrupt = 0x04;
regbase->display_enable = 0x01;
regbase->video_enable = 0x01;
regbase->drive = 0x01;
regbase->vdrive = 0x0;
ite_fontinfo(ip);
regbase->opwen = 0xFF;
/*
* Clear the framebuffer.
*/
rbox_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR);
rb_waitbusy(regbase);
for(i = 0; i < 16; i++) {
*((char *)ip->regbase + 0x63c3 + i * 4) = 0x0;
*((char *)ip->regbase + 0x6403 + i * 4) = 0x0;
*((char *)ip->regbase + 0x6803 + i * 4) = 0x0;
*((char *)ip->regbase + 0x6c03 + i * 4) = 0x0;
*((char *)ip->regbase + 0x73c3 + i * 4) = 0x0;
*((char *)ip->regbase + 0x7403 + i * 4) = 0x0;
*((char *)ip->regbase + 0x7803 + i * 4) = 0x0;
*((char *)ip->regbase + 0x7c03 + i * 4) = 0x0;
}
regbase->rep_rule = 0x33;
/*
* I cannot figure out how to make the blink planes stop. So, we
* must set both colormaps so that when the planes blink, and
* the secondary colormap is active, we still get text.
*/
CM1RED[0x00].value = 0x00;
CM1GRN[0x00].value = 0x00;
CM1BLU[0x00].value = 0x00;
CM1RED[0x01].value = 0xFF;
CM1GRN[0x01].value = 0xFF;
CM1BLU[0x01].value = 0xFF;
CM2RED[0x00].value = 0x00;
CM2GRN[0x00].value = 0x00;
CM2BLU[0x00].value = 0x00;
CM2RED[0x01].value = 0xFF;
CM2GRN[0x01].value = 0xFF;
CM2BLU[0x01].value = 0xFF;
regbase->blink = 0x00;
regbase->write_enable = 0x01;
regbase->opwen = 0x00;
ite_fontinit8bpp(ip);
/*
* Stash the inverted cursor.
*/
rbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '),
ip->cblanky, ip->cblankx, ip->ftheight,
ip->ftwidth, RR_COPYINVERTED);
}
void
rbox_windowmove(struct ite_data *ip, int sy, int sx, int dy, int dx, int h,
int w, int func)
{
struct rboxfb *rp = (void *)ip->regbase;
if (h == 0 || w == 0)
return;
rb_waitbusy(rp);
rp->rep_rule = func << 4 | func;
rp->source_y = sy;
rp->source_x = sx;
rp->dest_y = dy;
rp->dest_x = dx;
rp->wheight = h;
rp->wwidth = w;
rp->wmove = 1;
}
#endif