#	$NetBSD: MMEYE,v 1.44 2018/08/01 20:04:12 maxv Exp $
#
#	GENERIC -- everything that's currently supported
#

include "arch/mmeye/conf/std.mmeye"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

maxusers	16		# estimated number of users

# CPU support
options		SH3
options 	SH7708R		# 100MHz
options 	MMEYE
options 	MMEYE_NEW_INT=0xb000000e
#options 	MMEYE_NO_CACHE
options 	PCLOCK=33330000		# 33.33MHz
options 	INITTODR_ALWAYS_USE_RTC

options 	IOM_RAM_SIZE=0x01000000	# 16MB
options 	IOM_RAM_BEGIN=0x0c000000
makeoptions	DEFTEXTADDR="0x8c010000"

# Standard system options
#options 	INSECURE	# disable kernel security levels

options 	HZ=50		# clock interrupt generates every 1/HZ sec
#options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	DDB		# in-kernel debugger
#makeoptions	DEBUG="-g"	# compile full symbol table
#options 	SYSCALL_DEBUG

# Compatibility options
include 	"conf/compat_netbsd14.config"
options 	BSDDISKLABEL_EI	# endian independent disklabel support
options 	COMPAT_MMEYE_OLDLABEL	# old mmeye's disklabel support

# Executable format options
options 	EXEC_COFF	# COFF executables

# File systems
file-system 	FFS		# UFS
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	PROCFS		# /proc
#file-system	PTYFS		# /dev/pts/N support
options 	FFS_NO_SNAPSHOT	# No FFS snapshot support

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	NFS_BOOT_DHCP	# Support DHCP NFS root

options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages

# Kernel root file system and dump configuration.
#config		netbsd	root on ? type nfs
config		netbsd	root on wd0a type ffs

#
# Device configuration
#

mainbus0 at root

shb*	at mainbus?

rtc*	at shb?

com0	at mainbus? addr1 0xa4000000 irq1 11
com1	at mainbus? addr1 0xa4000008 irq1 12

# SH PCMCIA controllers
mmeyepcmcia0 at mainbus? addr1 0xb000000a addr2 0xb8000000 irq1 3 irq2 10
mmeyepcmcia1 at mainbus? addr1 0xb000000c addr2 0xb9000000 irq1 4 irq2 9

# PCMCIA bus support
pcmcia*	at mmeyepcmcia? controller ? socket ?

com*	at pcmcia? function ?		# Modems and serial cards
wdc*	at pcmcia? function ?
atabus* at ata?
wd*	at atabus? drive ?

ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
sm*	at pcmcia? function ?		# Megahertz Ethernet

pseudo-device	vnd			# disk-like interface to files
#pseudo-device	fss			# file system snapshot device
#pseudo-device	bpfilter		# Berkeley packet filter
#pseudo-device	npf			# NPF packet filter
pseudo-device	loop			# network loopback
pseudo-device	pty			# pseudo-terminals
pseudo-device	clockctl		# user control of clock subsystem

# Enable the hooks used for initializing the root memory-disk.
#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
#options 	MEMORY_DISK_ROOT_SIZE=3074	# size of memory disk, in blocks

#pseudo-device	md			# memory disk device (ramdisk)