/* $NetBSD: trap.h,v 1.13 2014/03/03 15:36:36 macallan Exp $ */
/*
* Copyright (C) 1995, 1996 Wolfgang Solfrank.
* Copyright (C) 1995, 1996 TooLs GmbH.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by TooLs GmbH.
* 4. The name of TooLs GmbH may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _POWERPC_TRAP_H_
#define _POWERPC_TRAP_H_
#define EXC_RSVD 0x0000 /* Reserved */
#define EXC_RST 0x0100 /* Reset; all but IBM4xx */
#define EXC_MCHK 0x0200 /* Machine Check */
#define EXC_DSI 0x0300 /* Data Storage Interrupt */
#define EXC_ISI 0x0400 /* Instruction Storage Interrupt */
#define EXC_EXI 0x0500 /* External Interrupt */
#define EXC_ALI 0x0600 /* Alignment Interrupt */
#define EXC_PGM 0x0700 /* Program Interrupt */
#define EXC_FPU 0x0800 /* Floating-point Unavailable */
#define EXC_DECR 0x0900 /* Decrementer Interrupt */
#define EXC_SC 0x0c00 /* System Call */
#define EXC_TRC 0x0d00 /* Trace */
#define EXC_FPA 0x0e00 /* Floating-point Assist */
/* The following are only available on the 601: */
#define EXC_IOC 0x0a00 /* I/O Controller Interface Exception */
#define EXC_RUNMODETRC 0x2000 /* Run Mode/Trace Exception */
/* The following are only available on 7400(G4): */
#define EXC_VEC 0x0f20 /* AltiVec Unavailable */
#define EXC_VECAST 0x1600 /* AltiVec Assist */
/* The following are only available on 604/750/7400: */
#define EXC_PERF 0x0f00 /* Performance Monitoring */
#define EXC_BPT 0x1300 /* Instruction Breakpoint */
#define EXC_SMI 0x1400 /* System Management Interrupt */
/* The following are only available on 750/7400: */
#define EXC_THRM 0x1700 /* Thermal Management Interrupt */
/* And these are only on the 603: */
#define EXC_IMISS 0x1000 /* Instruction translation miss */
#define EXC_DLMISS 0x1100 /* Data load translation miss */
#define EXC_DSMISS 0x1200 /* Data store translation miss */
/* The following are only available on 405 (and 403?) */
#define EXC_CII 0x0100 /* Critical Input Interrupt */
#define EXC_PIT 0x1000 /* Programmable Interval Timer */
#define EXC_FIT 0x1010 /* Fixed Interval Timer */
#define EXC_WDOG 0x1020 /* Watchdog Timer */
#define EXC_DTMISS 0x1100 /* Data TLB Miss */
#define EXC_ITMISS 0x1200 /* Instruction TLB Miss */
#define EXC_DEBUG 0x2000 /* Debug trap */
/* The following are only available on mpc8xx */
#define EXC_SWEMUL 0x1000 /* Software Emulation */
#define EXC_ITMISS_8XX 0x1100 /* Instruction TLB Miss */
#define EXC_DTMISS_8XX 0x1200 /* Data TLB Miss */
#define EXC_ITERROR 0x1300 /* Instruction TLB Error */
#define EXC_DTERROR 0x1400 /* Data TLB Error */
#define EXC_DBREAK 0x1c00 /* data breakpoint */
#define EXC_IBREAK 0x1d00 /* instructin breakpoint */
/* The following are only present on 64 bit PPC implementations */
#define EXC_DSEG 0x380
#define EXC_ISEG 0x480
/* The IBM 970x define the VMX assist exection to be 0x1700 */
#define EXC_970_VECAST 0x1700
#define EXC_LAST 0x2f00 /* Last possible exception vector */
#define EXC_AST 0x3000 /* Fake AST vector */
/* Trap was in user mode */
#define EXC_USER 0x10000
/* Exception vector base address when MSR[IP] is set */
#define EXC_HIGHVEC 0xfff00000
/*
* EXC_ALI sets bits in the DSISR and DAR to provide enough
* information to recover from the unaligned access without needing to
* parse the offending instruction. This includes certain bits of the
* opcode, and information about what registers are used. The opcode
* indicator values below come from Appendix F of Book III of "The
* PowerPC Architecture".
*/
#define EXC_ALI_OPCODE_INDICATOR(dsisr) ((dsisr >> 10) & 0x7f)
#define EXC_ALI_LWARX_LWZ 0x00
#define EXC_ALI_LDARX 0x01
#define EXC_ALI_STW 0x02
#define EXC_ALI_LHZ 0x04
#define EXC_ALI_LHA 0x05
#define EXC_ALI_STH 0x06
#define EXC_ALI_LMW 0x07
#define EXC_ALI_LFS 0x08
#define EXC_ALI_LFD 0x09
#define EXC_ALI_STFS 0x0a
#define EXC_ALI_STFD 0x0b
#define EXC_ALI_LD_LDU_LWA 0x0d
#define EXC_ALI_STD_STDU 0x0f
#define EXC_ALI_LWZU 0x10
#define EXC_ALI_STWU 0x12
#define EXC_ALI_LHZU 0x14
#define EXC_ALI_LHAU 0x15
#define EXC_ALI_STHU 0x16
#define EXC_ALI_STMW 0x17
#define EXC_ALI_LFSU 0x18
#define EXC_ALI_LFDU 0x19
#define EXC_ALI_STFSU 0x1a
#define EXC_ALI_STFDU 0x1b
#define EXC_ALI_LDX 0x20
#define EXC_ALI_STDX 0x22
#define EXC_ALI_LWAX 0x25
#define EXC_ALI_LSWX 0x28
#define EXC_ALI_LSWI 0x29
#define EXC_ALI_STSWX 0x2a
#define EXC_ALI_STSWI 0x2b
#define EXC_ALI_LDUX 0x30
#define EXC_ALI_STDUX 0x32
#define EXC_ALI_LWAUX 0x35
#define EXC_ALI_STWCX 0x42 /* stwcx. */
#define EXC_ALI_STDCX 0x43 /* stdcx. */
#define EXC_ALI_LWBRX 0x48
#define EXC_ALI_STWBRX 0x4a
#define EXC_ALI_LHBRX 0x4c
#define EXC_ALI_STHBRX 0x4e
#define EXC_ALI_ECIWX 0x54
#define EXC_ALI_ECOWX 0x56
#define EXC_ALI_DCBZ 0x5f
#define EXC_ALI_LWZX 0x60
#define EXC_ALI_STWX 0x62
#define EXC_ALI_LHZX 0x64
#define EXC_ALI_LHAX 0x65
#define EXC_ALI_STHX 0x66
#define EXC_ALI_LSFX 0x68
#define EXC_ALI_LDFX 0x69
#define EXC_ALI_STFSX 0x6a
#define EXC_ALI_STFDX 0x6b
#define EXC_ALI_STFIWX 0x6f
#define EXC_ALI_LWZUX 0x70
#define EXC_ALI_STWUX 0x72
#define EXC_ALI_LHZUX 0x74
#define EXC_ALI_LHAUX 0x75
#define EXC_ALI_STHUX 0x76
#define EXC_ALI_LFSUX 0x78
#define EXC_ALI_LFDUX 0x79
#define EXC_ALI_STFSUX 0x7a
#define EXC_ALI_STFDUX 0x7b
/* Macros to extract register information */
#define EXC_ALI_RST(dsisr) ((dsisr >> 5) & 0x1f) /* source or target */
#define EXC_ALI_RA(dsisr) (dsisr & 0x1f)
/* Helper defines to classify EXC_ALI_ */
#define DSI_OP_ZERO 0x0001
#define DSI_OP_UPDATE 0x0002
#define DSI_OP_INDEXED 0x0004
#define DSI_OP_ALGEBRAIC 0x0008
#define DSI_OP_REVERSED 0x0010
#endif /* _POWERPC_TRAP_H_ */