/* $NetBSD: scifreg.h,v 1.11 2019/05/28 08:59:34 msaitoh Exp $ */
/*-
* Copyright (C) 1999 SAITOH Masanobu. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SH3_SCIFREG_H_
#define _SH3_SCIFREG_H_
/*
* Serial Communication Interface with FIFO (SCIF)
*/
#define SH3_SCIF0_BASE 0xa4000150
#define SH3_SCIF1_BASE 0xa4000140
#define SH4_SCIF_BASE 0xffe80000
#ifdef SH3
/* SH3 definitions */
#define SCIF_SMR 0x0 /* serial mode */
#define SCIF_BRR 0x2 /* bit rate */
#define SCIF_SCR 0x4 /* serial control */
#define SCIF_FTDR 0x6 /* transmit fifo data */
#define SCIF_SSR 0x8 /* serial status */
#define SCIF_FRDR 0xa /* receive fifo data */
#define SCIF_FCR 0xc /* fifo control */
#define SCIF_FDR 0xe /* fifo data count set */
#define SHREG_SCSMR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_SMR))
#define SHREG_SCBRR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_BRR))
#define SHREG_SCSCR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_SCR))
#define SHREG_SCFTDR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FTDR))
#define SHREG_SCSSR2 (*(volatile uint16_t *)(SH3_SCIF0_BASE + SCIF_SSR))
#define SHREG_SCFRDR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FRDR))
#define SHREG_SCFCR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FCR))
#define SHREG_SCFDR2 (*(volatile uint16_t *)(SH3_SCIF0_BASE + SCIF_FDR))
#else /* !SH3 */
/* SH4 definitions */
#define SCIF_SMR 0x00 /* serial mode */
#define SCIF_BRR 0x04 /* bit rate */
#define SCIF_SCR 0x08 /* serial control */
#define SCIF_FTDR 0x0c /* transmit fifo data */
#define SCIF_SSR 0x10 /* serial status */
#define SCIF_FRDR 0x14 /* receive fifo data */
#define SCIF_FCR 0x18 /* fifo control */
#define SCIF_FDR 0x1c /* fifo data count set */
#define SCIF_SPTR 0x20 /* seial port */
#define SCIF_LSR 0x24 /* line status */
#define SHREG_SCSMR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SMR))
#define SHREG_SCBRR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_BRR))
#define SHREG_SCSCR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SCR))
#define SHREG_SCFTDR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_FTDR))
#define SHREG_SCSSR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SSR))
#define SHREG_SCFRDR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_FRDR))
#define SHREG_SCFCR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_FCR))
#define SHREG_SCFDR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_FDR))
#define SHREG_SCSPTR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SPTR))
#define SHREG_SCLSR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_LSR))
/* alias */
#define SHREG_SCSFDR2 SHREG_SCFTDR2
#define SHREG_SCFSR2 SHREG_SCSSR2
#define SCSPTR2_RTSIO 0x0080
#define SCSPTR2_RTSDT 0x0040
#define SCSPTR2_CTSIO 0x0020
#define SCSPTR2_CTSDT 0x0010
#define SCSPTR2_SCKIO 0x0008
#define SCSPTR2_SCKDT 0x0004
#define SCSPTR2_SPB2IO 0x0002
#define SCSPTR2_SPB2DT 0x0001
#define SCLSR2_ORER 0x0001 /* overrun error */
#endif /* !SH3 */
/* SMR: serial mode */
#define SCSMR2_CHR 0x40 /* character width (set = 7bit) */
#define SCSMR2_PE 0x20 /* Parity Enable */
#define SCSMR2_O 0x10 /* parity mode Odd */
#define SCSMR2_STOP 0x08 /* STOP bit (set = 2 stop bits) */
#define SCSMR2_CKS1 0x02 /* ClocK Select 1 */
#define SCSMR2_CKS0 0x01 /* ClocK Select 0 */
/* SMR: serial mode (for IrDA) */
#define SCSMR2_IRMOD 0x80 /* IrDA mode */
#define SCSMR2_ICK3 0x40
#define SCSMR2_ICK2 0x20
#define SCSMR2_ICK1 0x10
#define SCSMR2_ICK0 0x08
#define SCSMR2_PSEL 0x04 /* Pulse width SELelect */
/* SCR: serial control */
#define SCSCR2_TIE 0x80 /* Transmit Interrupt Enable */
#define SCSCR2_RIE 0x40 /* Receive Interrupt Enable */
#define SCSCR2_TE 0x20 /* Transmit Enable */
#define SCSCR2_RE 0x10 /* Receive Enable */
#define SCSCR2_CKE1 0x02 /* ClocK Enable 1 */
#define SCSCR2_CKE0 0x01 /* ClocK Enable 0 (not in sh4) */
/* SSR: serial status */
#define SCSSR2_ER 0x0080 /* ERror */
#define SCSSR2_TEND 0x0040 /* Transmit END */
#define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */
#define SCSSR2_BRK 0x0010 /* BReaK detection */
#define SCSSR2_FER 0x0008 /* Framing ERror */
#define SCSSR2_PER 0x0004 /* Parity ERror */
#define SCSSR2_RDF 0x0002 /* Receive fifo Data Full */
#define SCSSR2_DR 0x0001 /* Data Ready */
/* FCR: fifo control */
#define SCFCR2_RTRG1 0x80 /* Receive TRiGger 1 */
#define SCFCR2_RTRG0 0x40 /* Receive TRiGger 0 */
#define SCFCR2_TTRG1 0x20 /* Transmit TRiGger 1 */
#define SCFCR2_TTRG0 0x10 /* Transmit TRiGger 0 */
#define SCFCR2_MCE 0x08 /* Modem Control Enable */
#define SCFCR2_TFRST 0x04 /* Transmit Fifo register ReSeT */
#define SCFCR2_RFRST 0x02 /* Receive Fifo register ReSeT */
#define SCFCR2_LOOP 0x01 /* LOOP back test */
#define FIFO_RCV_TRIGGER_1 0x00
#define FIFO_RCV_TRIGGER_4 0x40
#define FIFO_RCV_TRIGGER_8 0x80
#define FIFO_RCV_TRIGGER_14 0xc0
#define FIFO_XMT_TRIGGER_8 0x00
#define FIFO_XMT_TRIGGER_4 0x10
#define FIFO_XMT_TRIGGER_2 0x20
#define FIFO_XMT_TRIGGER_1 0x30
/* FDR: fifo data count set */
#define SCFDR2_TXCNT 0xff00 /* Tx CouNT */
#define SCFDR2_RECVCNT 0x00ff /* Rx CouNT */
#define SCFDR2_TXF_FULL 0x1000 /* Tx FULL */
#define SCFDR2_RXF_EPTY 0x0000 /* Rx EMPTY */
#endif /* !_SH3_SCIFREG_ */