/* $NetBSD: if_rtk_cardbus.c,v 1.48 2015/04/13 16:33:24 riastradh Exp $ */
/*
* Copyright (c) 2000 Masanori Kanaoka
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* if_rtk_cardbus.c:
* Cardbus specific routines for Realtek 8139 ethernet adapter.
* Tested for
* - elecom-Laneed LD-10/100CBA (Accton MPX5030)
* - MELCO LPC3-TX-CB (Realtek 8139)
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_rtk_cardbus.c,v 1.48 2015/04/13 16:33:24 riastradh Exp $");
#include "opt_inet.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/device.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_ether.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_inarp.h>
#endif
#include <sys/bus.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/cardbus/cardbusvar.h>
#include <dev/pci/pcidevs.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
/*
* Default to using PIO access for this driver. On SMP systems,
* there appear to be problems with memory mapped mode: it looks like
* doing too many memory mapped access back to back in rapid succession
* can hang the bus. I'm inclined to blame this on crummy design/construction
* on the part of Realtek. Memory mapped mode does appear to work on
* uniprocessor systems though.
*/
#define RTK_USEIOSPACE
#include <dev/ic/rtl81x9reg.h>
#include <dev/ic/rtl81x9var.h>
/*
* Various supported device vendors/types and their names.
*/
static const struct rtk_type rtk_cardbus_devs[] = {
{ PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_MPX5030,
RTK_8139, "Accton MPX 5030/5038 10/100BaseTX" },
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE690TXD,
RTK_8139, "D-Link DFE-690TXD 10/100BaseTX" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8138,
RTK_8139, "Realtek 8138 10/100BaseTX" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139,
RTK_8139, "Realtek 8139 10/100BaseTX" },
{ PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CB_TXD,
RTK_8139, "Corega FEther CB-TXD 10/100BaseTX" },
{ PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_2CB_TXD,
RTK_8139, "Corega FEther II CB-TXD 10/100BaseTX" },
{ PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3603_TX,
RTK_8139, "Planex FNW-3603 10/100BaseTX" },
{ PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3800_TX,
RTK_8139, "Planex 10/100BaseTX FNW-3800-TX" },
{ PCI_VENDOR_ABOCOM, PCI_PRODUCT_ABOCOM_FE2000VX,
RTK_8139, "AboCom FE2000VX 10/100BaseTX" },
{ 0, 0, 0, NULL }
};
static int rtk_cardbus_match(device_t, cfdata_t, void *);
static void rtk_cardbus_attach(device_t, device_t, void *);
static int rtk_cardbus_detach(device_t, int);
struct rtk_cardbus_softc {
struct rtk_softc sc_rtk; /* real rtk softc */
/* CardBus-specific goo. */
void *sc_ih;
cardbus_devfunc_t sc_ct;
pcitag_t sc_tag;
pcireg_t sc_csr;
int sc_bar_reg;
pcireg_t sc_bar_val;
};
CFATTACH_DECL_NEW(rtk_cardbus, sizeof(struct rtk_cardbus_softc),
rtk_cardbus_match, rtk_cardbus_attach, rtk_cardbus_detach, rtk_activate);
const struct rtk_type *rtk_cardbus_lookup(const struct cardbus_attach_args *);
void rtk_cardbus_setup(struct rtk_cardbus_softc *);
int rtk_cardbus_enable(struct rtk_softc *);
void rtk_cardbus_disable(struct rtk_softc *);
void rtk_cardbus_power(struct rtk_softc *, int);
const struct rtk_type *
rtk_cardbus_lookup(const struct cardbus_attach_args *ca)
{
const struct rtk_type *t;
for (t = rtk_cardbus_devs; t->rtk_name != NULL; t++){
if (PCI_VENDOR(ca->ca_id) == t->rtk_vid &&
PCI_PRODUCT(ca->ca_id) == t->rtk_did) {
return t;
}
}
return NULL;
}
int
rtk_cardbus_match(device_t parent, cfdata_t cf, void *aux)
{
struct cardbus_attach_args *ca = aux;
if (rtk_cardbus_lookup(ca) != NULL)
return 1;
return 0;
}
void
rtk_cardbus_attach(device_t parent, device_t self, void *aux)
{
struct rtk_cardbus_softc *csc = device_private(self);
struct rtk_softc *sc = &csc->sc_rtk;
struct cardbus_attach_args *ca = aux;
cardbus_devfunc_t ct = ca->ca_ct;
const struct rtk_type *t;
bus_addr_t adr;
sc->sc_dev = self;
sc->sc_dmat = ca->ca_dmat;
csc->sc_ct = ct;
csc->sc_tag = ca->ca_tag;
t = rtk_cardbus_lookup(ca);
if (t == NULL) {
aprint_error("\n");
panic("%s: impossible", __func__);
}
aprint_normal(": %s\n", t->rtk_name);
/*
* Power management hooks.
*/
sc->sc_enable = rtk_cardbus_enable;
sc->sc_disable = rtk_cardbus_disable;
/*
* Map control/status registers.
*/
csc->sc_csr = PCI_COMMAND_MASTER_ENABLE;
#ifdef RTK_USEIOSPACE
if (Cardbus_mapreg_map(ct, RTK_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&sc->rtk_btag, &sc->rtk_bhandle, &adr, &sc->rtk_bsize) == 0) {
csc->sc_csr |= PCI_COMMAND_IO_ENABLE;
csc->sc_bar_reg = RTK_PCI_LOIO;
csc->sc_bar_val = adr | PCI_MAPREG_TYPE_IO;
}
#else
if (Cardbus_mapreg_map(ct, RTK_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
&sc->rtk_btag, &sc->rtk_bhandle, &adr, &sc->rtk_bsize) == 0) {
csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
csc->sc_bar_reg = RTK_PCI_LOMEM;
csc->sc_bar_val = adr | PCI_MAPREG_TYPE_MEM;
}
#endif
else {
aprint_error_dev(self, " unable to map deviceregisters\n");
return;
}
/*
* Handle power management nonsense and initialize the
* configuration registers.
*/
rtk_cardbus_setup(csc);
rtk_attach(sc);
if (pmf_device_register(self, NULL, NULL))
pmf_class_network_register(self, &sc->ethercom.ec_if);
else
aprint_error_dev(self, "couldn't establish power handler\n");
/*
* Power down the socket.
*/
Cardbus_function_disable(csc->sc_ct);
}
int
rtk_cardbus_detach(device_t self, int flags)
{
struct rtk_cardbus_softc *csc = device_private(self);
struct rtk_softc *sc = &csc->sc_rtk;
struct cardbus_devfunc *ct = csc->sc_ct;
int rv;
#ifdef DIAGNOSTIC
if (ct == NULL)
panic("%s: data structure lacks", device_xname(self));
#endif
rv = rtk_detach(sc);
if (rv)
return rv;
/*
* Unhook the interrupt handler.
*/
if (csc->sc_ih != NULL)
Cardbus_intr_disestablish(ct, csc->sc_ih);
/*
* Release bus space and close window.
*/
if (csc->sc_bar_reg != 0)
Cardbus_mapreg_unmap(ct, csc->sc_bar_reg,
sc->rtk_btag, sc->rtk_bhandle, sc->rtk_bsize);
return 0;
}
void
rtk_cardbus_setup(struct rtk_cardbus_softc *csc)
{
struct rtk_softc *sc = &csc->sc_rtk;
cardbus_devfunc_t ct = csc->sc_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
pcireg_t reg, command;
int pmreg;
/*
* Handle power management nonsense.
*/
if (cardbus_get_capability(cc, cf, csc->sc_tag,
PCI_CAP_PWRMGMT, &pmreg, 0)) {
command = Cardbus_conf_read(ct, csc->sc_tag,
pmreg + PCI_PMCSR);
if (command & PCI_PMCSR_STATE_MASK) {
pcireg_t iobase, membase, irq;
/* Save important PCI config data. */
iobase = Cardbus_conf_read(ct, csc->sc_tag,
RTK_PCI_LOIO);
membase = Cardbus_conf_read(ct, csc->sc_tag,
RTK_PCI_LOMEM);
irq = Cardbus_conf_read(ct, csc->sc_tag,
PCI_INTERRUPT_REG);
/* Reset the power state. */
aprint_normal_dev(sc->sc_dev,
"chip is in D%d power mode -- setting to D0\n",
command & PCI_PMCSR_STATE_MASK);
command &= ~PCI_PMCSR_STATE_MASK;
Cardbus_conf_write(ct, csc->sc_tag,
pmreg + PCI_PMCSR, command);
/* Restore PCI config data. */
Cardbus_conf_write(ct, csc->sc_tag,
RTK_PCI_LOIO, iobase);
Cardbus_conf_write(ct, csc->sc_tag,
RTK_PCI_LOMEM, membase);
Cardbus_conf_write(ct, csc->sc_tag,
PCI_INTERRUPT_REG, irq);
}
}
/* Program the BAR */
Cardbus_conf_write(ct, csc->sc_tag, csc->sc_bar_reg, csc->sc_bar_val);
/* Enable the appropriate bits in the CARDBUS CSR. */
reg = Cardbus_conf_read(ct, csc->sc_tag, PCI_COMMAND_STATUS_REG);
reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
reg |= csc->sc_csr;
Cardbus_conf_write(ct, csc->sc_tag, PCI_COMMAND_STATUS_REG, reg);
/*
* Make sure the latency timer is set to some reasonable
* value.
*/
reg = Cardbus_conf_read(ct, csc->sc_tag, PCI_BHLC_REG);
if (PCI_LATTIMER(reg) < 0x20) {
reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
reg |= (0x20 << PCI_LATTIMER_SHIFT);
Cardbus_conf_write(ct, csc->sc_tag, PCI_BHLC_REG, reg);
}
}
int
rtk_cardbus_enable(struct rtk_softc *sc)
{
struct rtk_cardbus_softc *csc = (struct rtk_cardbus_softc *)sc;
cardbus_devfunc_t ct = csc->sc_ct;
/*
* Power on the socket.
*/
Cardbus_function_enable(ct);
/*
* Set up the PCI configuration registers.
*/
rtk_cardbus_setup(csc);
/*
* Map and establish the interrupt.
*/
csc->sc_ih = Cardbus_intr_establish(ct, IPL_NET, rtk_intr, sc);
if (csc->sc_ih == NULL) {
aprint_error_dev(sc->sc_dev,
"unable to establish interrupt\n");
Cardbus_function_disable(csc->sc_ct);
return 1;
}
return 0;
}
void
rtk_cardbus_disable(struct rtk_softc *sc)
{
struct rtk_cardbus_softc *csc = (struct rtk_cardbus_softc *)sc;
cardbus_devfunc_t ct = csc->sc_ct;
/* Unhook the interrupt handler. */
Cardbus_intr_disestablish(ct, csc->sc_ih);
csc->sc_ih = NULL;
/* Power down the socket. */
Cardbus_function_disable(ct);
}